BMW icom tech support

1.Easy step to install BMW ENET E-sys 3.29.0 software
 

Latest BMW E-SYS 3.29.0 F-series coding software released here!
Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding!
Compatible with BMW ENET Cable and ICOM.
Note before you download:
ALL links here are free to all, NO pass!
And also try on your own risk!
E-SYS 3.29.0 setup file Download:
https://mega.nz/#!dERyUYCY!tW40F79km2jtLyEcR4e-RIB2Z6t0L2G7zOjlsAd5DcE

Psdzdata V3.61.5 Lite Download:
https://mega.nz/#!ehEjDLJb!gVbQZGfofR-BVzb_dn7sP1aYxqmtrSKNvmjUDa-kmKY

E-SYS Launcher Premium 2.7.1 Download:
https://mega.nz/#!F5oSUA5B!OYnxsT6ccYufG9us53ZpXhkJ5FJVys8WRnphvx6p9o0
Tips:

1. You must uninstall the existing E-SYS version before installing new E-SYS 3.29.0.
2. E-sys Launcher Premium 2.7.1 is tested OK to launch E-SYS 3.28.1, but for E-SYS 3.29.0, haven’t tested, should work.
3. E-SYS Launcher Premium V2.7.1 require NET Framework 4.5.2 or above.

After download ESYS 3.29.0 Program, what tools you need for BMW Coding?
BMW ENET Cable : Cheapest option for BMW F-series Coding
BMW ICOM: Allow you to fully diagnose and program more than just do coding)
Recommended: BMW ICOM NEXT or ICOM NEXT WIFI. (Next generation of ICOM A2)
 
Why choose E-Sys Launcher Premium to launch E-Sys software?
E-Sys Launcher Premium allows you to perform FDL coding.
– Increased default memory allocation.
– Enhanced overall System stability.
– Zero E-Sys Configuration.
– Personalized and individualized token.
– Easy-to-use.
Note: With E-Sys Launcher Premium, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly at first!
How to install BMW E-Sys 3.29.0?
(Steps refer to E-Sys 3.26.1 installation)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.

Set the data path for E-Sys, the default is C:\Data. Click next until the installation begins.
  

Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
 
The patch folder contains 2 files

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.

2.BMW ISTA Rheingold Installation Guide Full Steps for Beginner

Here is a detailed BMW ISTA Rheingold installation tutorial with full steps for sharing! If you are just beginner and not so familiar with ISTA, below part will surely help you out!

Note before reading:

BMW ISTA installation method may differ from source and version. This method is only for reference.

If you need tested working BMW ISTA software with installation tech support, you can check:

V2017.03 BMW ISTA 4.04.12 BMW ICOM software HDD WIN7

Step 1

Download and run unblock.reg BEFORE downloading anything else. Then REBOOT the computer, this is a critical step.

Install everything in Prerequisites folder, only if you don’t have a previous Rheingold installation. For 64-bit Windows, install both vcredist x32 & x64 from Microsoft, if not already installed.

Install the following – you can get both from Microsoft:

Visual C++ Redistributable Packages for Visual Studio 2013

NET Framework 4.6

Step 2

Download Rheingold.7z using MegaSync or JDownloader. Once downloaded, check whether “Rheingold.7z” is blocked.

If it is, unblock it. Right click on the file, go to Properties and if files are blocked, then you will see the unblock button as in the picture below:

Extract Rheingold.7z using 7zip ONLY.

Location doesn’t matter, but preferred location is C:\.

If extracting to this location, you will need admin privileges for 7zip before extracting the file. To avoid future issues with admin rights etc. you can also extract this file to the root of a secondary drive, for e.g. D:\

Step 3

Create desktop shortcut from:

C:\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe.

If not, create the shortcut from the location you extracted the files to.

Run the following registry files, depending from your OS:

Ista-prog-x64.reg

Ista-prog-x86.reg

Run the following registry fixes from the C:\Rheingold folder (scroll all the way to the bottom to see these files):

Step 4

Run ISTAGUI shortcut from your desktop as administrator.

When prompted for license, copy the license key from the “rheingold-license.txt” located in “C: \Rheingold”

If/When prompted for dealer ID, enter “1” and ignore following warnings. ISTA+ will close.

Run again ISTAGUI shortcut from your desktop as administrator and verify the databases in Settings > Version tab in ISTA/D.

If you encounter start/running issues, delete the “Rheingold” folder from “C:\”, run “RCleanerV4.4.exe” as administrator and start again from step 2.

Now you can use BMW ISTA diagnostic software!

If you are tired to choose BMW ICOM, prepare a tablet and install BMW ISTA, you can also look at this entire kit:

http://www.obd2eshop.com/wholesale/bmw-icom-next-a-b-c-plusbmw-icom-software-hdd.html

3.Guide to BMW ISTA+ software for Beginners

It includes installation, configuration and/or usage. The guide attempts to answer fundamental questions on what the BMW ISTA+ is for, what can you do with it and how to configure it so that you can connect to the car and run diagnostics on all cars and in case of F/G/i/Mini/RR cars, programming.

https://mega.nz/#!dZAEVKZb!Hj6mAnPit69-xxGjpgdQxnTcevOjKj7DnXWnVkAG9FI 

Part 2: Programming with ISTA+

Programming fundamentals with ISTA+
NOTE: Programming with ISTA+ is only possible with a BMW ICOM and a 70+ amp rated Power Supply. DO NOT ATTEMPT TO PROGRAM WITH ISTA+ WITHOUT THESE TWO ITEMS!

Programming can be accessed via the “Vehicle management” / “Software update” menu.
The planned actions are initially produced in the measures plan. The measures plan determined after the vehicle test can be done directly in the “Comfort” tab, or added to manually beforehand in the “Advanced” tab, then calculated and executed.
The car can be programmed to the latest I level using the comfort software update without any further actions based on the measures plan which has already been determined.
It is not possible to select additional actions manually in this menu.
Initializations and follow-up operations that might be required are automatically added during the measures plan calculation.
All other modes of programming and pre/post requirements are discussed in detail in the Help Document located at ~\Rheingold\Help folder.

Software update
Comfort – as per the suggested measures plan
Advanced – with broadened scope
Additional software (range of functions is not active yet)
Control unit replacement
Before exchange (preparation) – control unit read-out for the exchange
After exchange (subsequent evaluation) – control unit configuration after exchange
Vehicle modification
Retrofit
Conversion
Conversion (only coding)
Backfitting
Immediate measures
Part 3: FAQ: Evaluate SOC and Battery Registration with ISTA+

Checking your State of Charge and Battery Registration with ISTA+

Connect to the car using your preferred cable.

Do a vehicle test

After a vehicle test, go to Vehicle Management –> Service functions tab.

Next select Body, then Voltage Supply

Then select Battery

Here you will be presented with 2 options:

Option 1 is to test SOC. Choose Evaluate Battery State of Charge OR

Option 2 – Register Battery Replacement

Then click on at the bottom right. The ABL/FUB/REP and/or SSP will be populated. Select the FUB or REP to learn more OR select the ABL and run it.

NOTE: If changing battery types, coding is required before you can register battery replacement.

Part 4. FAQ: Steering Angle Sensor Adjustment

Steering Angle Sensor Adjustments:

Go to Vehicle Management –> Service Functions

Select Chassis and Suspension

Select Steering Angle Sensor

Select Steering Angle Sensor Adjustment

Then click on at the bottom right. The ABL/FUB/REP and/or SSP will be populated. Select the FUB or REP to learn more OR select the ABL and run it.

Part 5: From the release notes, following series are supported for programming in ISTA+ and iLevels for each series:

F001 (F0x, RR4, RR5) F001-16-11-501

F010 (F06, F1x) F010-16-11-501

F020 (F2x, F3x, F80, F82, F83, F87) F020-16-11-501

F025 (F15, F16, F25, F26, F85, F86) F025-16-11-501

F056 (F4x, F5x, F6x) F056-16-11-501

S15A (G1x, G3x) S15A-16-07-506

I001 (I03, I08) I001-16-07-506

The following Mini/RR programming is not supported in ISTA+

R056 (R55, R56, R57, R58, R59, R60, R61)

RR01 (RR1, RR2, RR3)

You can use ISTA/P to program these cars.

4.Update BMW ICOM Next firmware to V1.40.05 (guide)

Post topic: BMW ICOM Next fw: 1.4 1.40.05 bootimage 1.25.02 download and update instructions.

Free download BMW ICOM Next firmware 1.40.05:
https://mega.nz/!X14TxZYY!6zrJ6og9gR5u-CcGbGtWSpHBCknjhl-LElommEgYSK0
Compatible ICOM Next interface:

• BMW ICOM NEXT fw:1.4.0 V2017.03 Rheingold ISTA-D ISTA-P (Item No. SP269-1)
• BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269)
• Wifi BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269-B)

1. Please use internet cable to connect ICOM Next with the computer, and charge ICOM Next via 12V power adapter or connect ICOM Next to BMW vehicle for power.

2. Use IE Internet Explorer to open http://169.254.33.45:60080/, username/password: root/NZY1150263

3. Select “Update Firmware”, you can see ICOM firmware version information.

4. Select “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.

5. Select “Yes” when you get prompt “Write the image file to the flash?”, then ICOM indicator light will turn red.

6. When it shows “The SYSTEM IMAGE update was successful”, click “Update Firmware”.

8. click “Yes” when you get prompt “Write the image file to the flash?”, then the ICOM indicator light will turn red again.
9. Complete updating, click “reboot”.

10. Click “Home” – “Update Firmware”, you will see ICOM Next firmware display the newest version.

Tip:
Make sure your computer obtain IP address automatically.
Done! GOOD LUCK!

5.Restore BMW ICOM Next in 12 steps

Here is the customer solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following steps:

Note: DO NOT UNPLUG the BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.

The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.

If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:

1. Please ensure that ALL of the following prerequisites are satisfied:

1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).

1.2. The USB flash drive must be formatted with a FAT32 file system.

1.3. A minimum of 60 MByte free space is required on the USB flash drive.

2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.

ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:

– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)

– or enter the whole path into the Windows Explorer’s address bar and press enter.

3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.

4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.

5. Disconnect the {ICOM Next} from the power supply.

6. Plug the {USB} flash drive into the {ICOM NEXT}.

7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.

8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.

9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.

10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.

11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.

12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.

IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.

All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.

Free download icom next firmware:

ICOM NEXT firmware 3.14.10:

https://mega.nz/#!uZ0XgTbB!0pW25mgpiUuhB2K5gBIxw9O-Yj65aQ1Jh50RdKAD4Is

ICOM NEXT firmware 3.14.08:

https://mega.nz/#!D0cwTTzb!LCeRki-jObvuV9m6UaRsxiGCuHlwv-u33ShJO4ZGXaQ

ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)

https://mega.nz/#F!zZUXiYpI!H9-RKjfqd4Mjk9EoWMlxLw