Autel IM508 is an all in 1 Scanner support immo and key programming, diagnostics and Advanced services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn, Support Models up to 2020 Smart Blade Keys
Autel MaxiIM IM508 Key Programming Tool can successfully program 2022 Hyundai i10 ID4A all keys lost. The operation process needs to read password first, IM508 serves it free. Autel IM608 can do the job as well.
Following the procedure to learn how to do.
Connect IM508 into OBD interface.
Step1. Read Pincode
IMMO >> Accept >> Hyundai >> Manual selection >> Europe >> GRAND i10(AI3) >> 2020- >> Smart key >> Yes >> Immo status scan >> Read PIN >> Read Pin code(4A smart card)
This function only supports models with 4A chip type smart card.
Please ensure the key type is correct!
Press the START button, turn the Hazard Warning Light on.
The password that is read: 439476
Step2. Program Key
All keys lost >> Start
This function supports add key and all key lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally, press “Yes”.
Turn the ignition off.
(Note: the instrument screen is black)
Open and then close the driver door once!
Autel IM508 will automatically enter the 6-digit security code.
OK >> Yes
Note! Click “OK” to complete the following steps:
Within 5s after OK is pressed, use the back or top of the Universal Smart Key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above step so that the key chip can be successfully programmed)
Press “OK”.
Programming succeeded.
Press “No” to complete.
Number of current keys: 1
Test the new key, it can normally start the car.
Done.
Today I’m gonna test the Autel IKEY Remote to add a smart key for 2019 Peugeot 3008 with Autel MaxiIM IM508 Key Programmer. Having got an original working key at hand, let’s get start:
After identifying VIN, enter into “All smart key lost”.
Press the emergency flasher switch.
After this function is performed, all keys will be cleared. They can be used again only when they are relearned.
If this function needs to be performed, please get all keys ready.
Press “OK”.
If security code is wrong, learning will not be allowed.
Enter the number of keys: 2
OK >> Yes
Insert the working key into the smart key key card slot(inside the hand bar below the START button or inside the car cup holder)
Note: If there is a smart key that can start vehicle, you must insert the original key first, otherwise the intelligent function of the original key may be disabled!
Is the smart key to be learned inserted into the smart key card slot? Yes
Learned succeeded.
Remove the working key.
Then, insert the Autel Universal Key.
The number of keys to a successful match: 2
Test the keys.
Both can start car, and the remote work fine.
Completely done.
Using Autel IM508 to program a Peugeot 3008 2019 smart key successfully.