Program BMW F series by BMW ENET Interface Cable step by step

Matched product:

[Ship From US] ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series for BMW

[Ship From US] ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series for BMW

Latest price:US$19.00
US$17.995% off
  • Item No. SF167
  • Free Shipping
BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series
Program BMW F series by BMW ENET Interface Cable step by step
1.How to install E-sys coding software on Windows XP?


01) Run "\\E-sys 3.18.4\E-Sys_Setup.exe" to install program to "C:\EC-Apps\ESG\E-Sys\E-Sys.exe"
(Install Password is "lo8F3lsVVg" if prompted)
02) Copy "EDIABAS" folder from "\\E-sys 3.18.4\E-sys 3.18.4\EDIABAS" to "C:\EDIABAS"
03) Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET (it’s possible it has a different value, in that case just change it)

04) Copy "est" folder from "\\E-sys 3.18.4\est" to "C:\ESysData\e-sys est"
05) Copy all "psdzdata" subfolders (all 7 Folders) from "\\2_46.3 psdzdata\" to "C:\ESysData\psdzdata\"
06) Copy the contents of the "C:\ESysData\psdzdata\swe" folder into the "C:\ESysData\SWE" folder.
07) Make sure that there is a "Dist" folder in each of the Chassis (F01/F10/F25) folders etc. (e.g.
"C:\ESysData\psdzdata\mainseries\F010\F010_12_03_511\odx\dist") (should already be set, but check anyway - if not there - create empty "Dist" folders)
08) Turn Car's Auxillary Power On (Engine Off) and make connection to car with OBDII-Enet Interface Cable (Wait a few minutes until the network adapter icon shows a Connection with the yellow exclamation point over it)
09) Launch "C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe" to verify cable and connection are working (IP Address, MAC Address, & VIN will be displayed verifying actual communication to the car) (ZGW_SEARCH.exe works intermittently on 64-Bit Windows - Not necessarily a problem if the ZGW_SEARCH window is blank, so long as the computer's wired network adapter shows an IP Address assigned to the computer from the car)
10) Run "C:\EC-Apps\ESG\E-Sys\E-Sys.exe" (It will take E-Sys a while to write the log file) and Under Options, Settings: On the ODX Tab, set the ODX Rule Path to "C:\ESysData\Rules" On the EST Tab, set the Developer-Soft-Token EST Path to "C:\ESysData\est\Code Away.est"
11) Hit the Connect Button on E-Sys Select Target Vehicle (e.g. TargetSelector:Project=F020_12_03_503m VehicleInfo=F020) NOTE: Target vehicle for F30 is F20!
12) Select Connection via VIN, and click Connect (Window should pop up confirming successful connection)
(The program will remember the "connection via VIN" for future connections)
13) When you connect for the first time to your car you will need the E-Sys PIN, which is 2690
14) Please see other how-to documents regarding coding itself.
15) Miscellaneous:
a. Some modules take a long time before the changes begin working (e.g. trunk and mirror close). If still not working after an hour or so, try recoding the module again, even if it looks like the correct parameter (e.g."nicht_aktiv") is set.
b. Share any undocumneted codings with the community.
c. If Coding for an extended period of time (>30 minutes or so

2. Program BMW F series by BMW ENET Interface Cable step by step 
Bought the item BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series from eOBDShop,
This is my experience Program BMW F series by BMW ENET Interface Cable  step by step. Hope that help you 

Detailed steps are as following:
1.Start E-sys program, and connect to car by clicking icon at the top.
2.Select your car, and click connect. Select interface depending on interface you will be using. If you use ENET cable then select connection via VIN at the bottom.
3.Go to expert mode > coding. Click read under vehicle order to read FA from car. Click edit.
4.Screen will automatically change to FA-editor. Right-click on FA, and choose “calculate FP”.
5.Once finished, vehicle profile is shown on right. Expand FA List on left, to SALAPA-element.
6.Delete/add FA from the bottom left window, and click apply changes icon.
7.New FA must be verified before it can be written to car. Right-click FA and calculate FP again. If FA entered is wrong, error will be shown. For example, “DDD” is not correct FA and E-sys will display error message. After FP is calculated, save the new FA.
8.Go to Expert mode > VCM. Load your saved FA file, right-click on FA and calculate FP again.
9.Click VCM master tab, and click write FA FP. New FA will be written to the car.
10.Click “read FA FP VIN” button and check FA to make sure changes are saved to the car.
3.User manual for E-sys v3.23.4 Psdzdata v50.3 BMW Coding

Free download E-sys 3.23 Psdzdata 50.3 with password and coding PIN:

Password: E*G@rqVa

PIN: 2670


What is BMW E-SYS:

E-SYS is the BMW diagnostic software for BMW F series coding?


What is Psdzdata?

The Psdzdata is basicly a pack that contains all the data needed for E-sys to be able to code a car, flash ecus and firmware update of the modules on the car.


What is BMW coding?

Coding is for people who want to play with the settings of BMW car software to achieve something more desirable. Coding is not really a programming; it is another name for re-configuring the software of your car. There are limited risks of messing up with your car SW but if you are careful, follow step by step instructions and know and understand what you are doing, it may be OK to go ahead. Never try to guess and do it, be absolutely sure for your steps, clarify your doubts before you proceed. There are experts on the forum willing to help you, don’t hesitate to ask even a silliest question. Never-the-less, if you want to try new unknown settings which others have not tried, believe me, you are playing with fire.


What is needed for coding on BMW F series:

BMW Ethernet to OBD-II Cable (ENET cable)

E-Sys software with installation password and coding PIN


A dedicated laptop with Windows XP (preferred) or Windows 7 with minimum 80 GB of free space

Software installer (optional), files attached

Backup utility for CAF files (optional), file attached


Where to get a working BMW ENET cable for coding?

Just DIY or spend a bit on it (usually less than $20)

Google “diy enet cable” and lots of DIY guides can be found there

But honestly, better to buy a working one with some pennies (lots of issues can be avoided)

The ENET cable tested myself:

Confirmed it’s working! Usually need luck with items from China.


What can be done with ENET cable with E-sys?

  1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
    2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
    3. Display engine output and torque meter ( purely fun, look engine output )
    4. Cancel confirmation screen big screen boot delay
    5. Open the voice recognition function
    6. Three kind of bluetooth phone ringtones ( personality only )
    7. Increasing the cic memory address to 50
    8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
    9. The digital speed display ( fun only )
    10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
    11. Indoor cycling memories of the last time the state when engine off
    12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
    13. Increasing shift paddles
    14. The small screen to the large-screen display modify
    15. Pdc display vertical and horizontal
    16. Disable the seat belt status display – passenger seat
    17. Disable the seat belt status display – driver seat
    18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
    19. Disable seat belt reminder – driving position
    20. Disabled unfasten their seat belts voice prompts – passenger seat
    21. Disabled unfasten their seat belts voice prompts – driving position
    22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
    23. Angel eyes open and cancel functions
    24 turn off the engine start-stop function turned on by default
    25, gps time synchronization
    26. Foot open the back cover
    27. Ds show s1-s7 selection
    28. Active sports gearbox program sport +
    29. Single microphone settings
    30. Engine off automatically unlock
    31. Internet applications
    32. Armrest usb playback video
    33. The maximum distance disable front camera view
    34. The maximum distance to disable the rear camera view
    35. Maximum speed disable front camera view
    36. The maximum speed to disable the rear camera view