WiTech MicroPod 2 Diagnostic Programming tech support


WiTech MicroPod 2 Diagnostic Programming tech support incl:
1.How to download and install the microPOD Setup Utility
2.WiTech Micropod2 red light flashes microprocessor 1 is unresponsive solution:
3.Step by step install wiTECH MicroPod 2 V17.04.27 &how to use
4.How to solve Micropod2 Registration Error?"Registration is needed...
6.wiTech Micropod2 red light flashes microprocessor 1 isunresponsive solution
7.(Solved)Chrysler Jeep Wrangler Vin was updated to PCM using Witech error

1.How to download and install the microPOD Setup Utility

IMPORTANT: Once the microPOD is configured using the microPOD Setup Utility, all the microPOD Wireless Settings will be deleted. You will be required to follow the instructions from the KB link titled “How to configure a Wireless Profile on a microPOD II”.

To download the application, please login to DealerCONNECT > Service > wiTECH Information > microPod Setup Utility

Step 1
Click on “Run” to begin the downloading process of microPOD Setup Utility
 
Step 2
The install wizard will appear to install the wiTECH Driver x64 onto your computer if your PC has not been installed with wiTECH 1.0 application.
If the PC has been installed with wiTECH 1.0 App, you will not see the screen below and proceed to Step 6. Otherwise, click “Next” to proceed.

Step 3
Read the License Agreement carefully, and accept the terms in the license agreement. Then, click “Next” to continue.

Step 4
You are now ready to start the actual installation of the driver. You now need to click on “Install” for it to start.

Step 5
This will now install the wiTECH Driver x64. Once complete, the program will automatically proceed to the next step.


Step 6
Once the installation has completed, click “Finish”. Proceed to the following section, “Using the microPOD Setup Utility”.
Using the microPOD Setup Utility

NOTE: Please make sure that your computer is connected to the internet and the microPOD is connected to the computer via USB before starting this process. This application will help you configure your microPOD for wiTECH 2.0.

Step 1
Start microPOD Setup Utility by clicking the icon on the desktop:
If the microPOD Setup Utility that is installed is out of date, you will be forced to update to the newer version of the application.

Step 2
Please make sure your microPOD is connected to the PC via USB.

Step 2a
If you see the following screen you may not be connected to the internet, or have a firewall that blocks 1 or more of these websites.
Select “Continue” on the next screen for wiTECH 2.0 Device Setup and Configuration.

 
NOTE: If you only want to configure the wireless setting on a microPod device to use with wiTECH 2.0, click “Wireless Configuration” and follow instructions.
Select “Continue” on the next screen to begin attempting to connect to the microPOD device.


Step 3
Once your microPOD II is recognized by the utility, select “Continue” to proceed with the configuration.


NOTE: microPODs with a serial number beginning with “WFP” should NOT be used with this utility.

Step 3
If the utility does not find the microPOD device, please assure that the microPOD is connected via USB and click “Refresh”

Step 4
The following screen will appear for up to 15 minutes while the microPOD device is being configured.

Step 5
The following screen will appear when the utility completed the configuration of microPOD for wiTECH 2.0 Application.
Note: After microPOD Setup Utility is ran, all existing wireless networks will be removed from the microPOD.
Important! Leave the microPod Setup Utility window running as you will be required to complete software updates to the microPod device before configuring the wireless.

Step 5a
Login into wiTECH 2.0. The microPOD II that was just configured using the microPOD Setup Utility should appear in the wiTECH 2.0 discovery. You will need to update the operating system of your microPOD II before it can be used with wiTECH 2.0. Click“Continue”, and your web browser will redirect you to the page to download and install the operating system update as seen in the following step.

*NOTE: If microPOD II does not show up in discovery after a couple of minutes please power cycle your microPOD II by unplugging it and plugging it back in.

Step 6
Click “Update Now” and your microPOD II should continue to the update screen. Once updating, do not interrupt your microPOD II at any point until the update is complete.
*NOTE: This can take upwards of 9 minutes. It is normal activity for the microPOD II to reboot.

 Step 7
Click “OK” and you will be navigated back to the wiTECH 2.0 discovery page. Your microPOD II should appear updated and ready for use.

 Step 8
With the microPod Setup Utility still running, configure wireless on the wiTECH microPod II device.

Guide of wiTECH MicroPod 2 Chrysler diagnostic tool setup.
If your dealership purchased a new microPOD and you would like to convert your existing microPOD for using with wiTECH 2.0 System, you need to download and install the microPOD Setup Utility to configure/setup your microPOD for wiTECH 2.0.
NOTE: microPODs with a serial number beginning with “WFP” should NOT be used with this utility.
PROCEDURE
If you have a restricted network, you must first make sure that all sites listed below are enabled to be able to successfully use microPOD Setup Utility and the wiTECH 2.0 System.
mixpanel.com
bugsnag.com
fcawitech.com
chrysler.com
dealerconnect.com
jeep.com
witechsystem.com

Note:Please disable any Anti-Virus software that you have on your computer in order to allow the microPOD Setup Utility to install and run properly.
 

2.WiTech Micropod2 red light flashes microprocessor 1 is unresponsive solution:

Problem:

I was ready to connect the wiTECH2 Micropod 2 interface to diagnose Chrysler 300M, but after i connected the adapter with laptop, the MicroPod2 indicator light flashed and software prompted error message “microprocessor 1 is unresponsive”. What’s the problem?

Possible cause:
1).Software is not compatible with hardware/firmware.


We have several wiTECH2 Micropod 2 Chrysler diagnostic scan tools clone (SP271-C,SP271-B,SP271), they are made by different manufacturer. Software cannot be mixed used. i.e SP271-C wiTech software can work with SP271-C Micropod II firmware. Please use the default software CD in package. 

 2). Incorrect connection 

Please follow the correct steps to connect the micropod2

Connect wiTech Micropod2 to vehicle first
If the red indicator light turn on, then connect wiTech to laptop
Open wiTech software (if software detect newer wiTech version,it will run an upgrade.Wait the upgrade completed. If it does not prompt to update software to newer version, just run software)
If you connect to laptop first (power by USB cable) and run software immediately, software and firmware will automatically synchronous upgrade and that will lead to the firmware failure. MUST CONNCT THE DEVICE TO VEHICLE.

If the red indicator flashes, the firmware is damaged. You have to send it back to repair.
 

3. Original Chrysler wiTech MicroPod II VS HQ clone

Here's a comparison chart of genuine vs. clone witech micropod 2 system, incl. High-quality witech micropod system vs. bad micropod 2 china clone.
Genuine WiTech Micropod2 vs. Clone wiTech Micropod II
wiTech-Micropod-2-original-vs-clone-1
wiTech-Micropod-2-original-vs-clone-1
wiTech-Micropod-2-original-vs-clone-1
wiTech-Micropod-2-original-vs-clone-1
witech micropod2 for sale:
http://www.obd2eshop.com/wholesale/witech-micropod-2-for-chrysl.html
http://www.obd2eshop.com/wholesale/witech-micropod-2-for-chrysl.html
 
– the copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly.
– With high-quality USB cable which transfer data stably and reliably
– The package is anti-static, moisture-proof, anti-electromagnetic interference
– Workable with your current wiTECH software
– No smart cables required
– No drivers needed
 
micropod 2 ebay?
Ebay should be a good place to buy items. But for professional vehicle diagnostic tools, a site with experienced experts and technical support teams like http://www.obd2eshop.com
 
witech micropod 2 price:
Original micropod 2: $4599 around
Clone micropod 2: $179 – $525, depends on quality
Note: MicroPod 2 (Item. No SP271-B) is the best quality one among china clones, same as the original.
 
witech micropod II HQ Clone Customer Review:Just ordered a chinese clone MicroPod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from Chrysler). For now it works fine.
I have tested Dodge also. I just used it on a 2014 dodge avenger just fine. I am able to flash a module update and program a new key with the unit.
I don’t have experience with Windows XP. This version of Witech works fine on Windows 7 and Windows 10.
I have also uploaded pictures of the internals for those who are curious.
 
MicropodClone1
MicropodClone1

MicropodClone1
MicropodClone1
MicropodClone1

3.Step by step install wiTECH MicroPod 2 V17.04.27

Chrysler, Jeep, Dodge diagnostic VCI interface wiTECH MicroPod 2 software updated!! here, free download wiTECH software v17.04.27 and get the how-to’s of wiTECH 2 app installation to install Chrysler wiTECH software yourself! Also, a wiTECH MicroPod 2 v17.04.27 user manual of key programming is attach here for you.

Part 1: v17.04.27 wiTECH download link:
https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg
It' s wiTECH software crack
No need password for wiTECH MicroPod 2 login
No need wiTECH software license
Tested OK by professionals @obd2eshop.com
Safe to use with wiTECH MicroPod 2 clone (item no. SP271-C only)
 
Operation system of wiTECH 2 download:
Windows XP;
Windows 7
THE MOST IMPORTANT NOTES:
  1. The date of the computer must be the same as the fact
  2. The computer must be connected to the Internet
  3. Connect the machine to the MicroPod 2 to open the wiTECH software
  4. The system may ask you to turn off the software and turn it on for registration again. Repeat it for several times. Then you can use it normally
Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack:
 
Step 1   install AdobeAIRInstaller.exe
Step 2   install jre-6u45-windows-i586.exe
Step 3   install wiTECH_Install_17.04.27.exe
Step 4   Restart the computer
wiTECH diagnostic tool is ready for use!

Part 3: How to use wiTech MicroPod II clone for auto key programming
Step 1
Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.
witech-micropod-2-v17-1
 
Step 2
Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.
witech-micropod-2-v17-1
 
Step 3
Next select “Miscellaneous Functions,” then “Program Ignition Fobix.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.
witech-micropod-2-v17-1
 
Step 4
After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).
witech-micropod-2-v17-1
 
Step 5
Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.
 
Part 4: How to use MicroPOD II clone for auto key programming
 
Step 1
Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.
 
Step 2
Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.
micropod-ii-key-programming-1
 
Step 3
Next select “Miscellaneous Functions,” then “Program Ignition Fobix.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.
micropod-ii-key-programming-1
 
Step 4
After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).
micropod-ii-key-programming-1
 
Step 5
Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.
micropod-ii-key-programming-1
 
Things to Remember:
  • You must be online to program the key.
  • The PIN Code is only good for one session, which lasts 72 hours. After 72 hours the pin code expires.
  • If you input the wrong code for three-time it locks the BCM and you cannot service the vehicle for 24 hours.
  • The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
  • The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.
 

4.How to solve wiTech MicroPod 2 V17.04.27 register error

Issue:
"Registration is needed
Device with serial number*** is not registered. Please check the knowledge
base to determine how to register a device"
wiTech MicroPod 2 V17_04_27 is not registered-01
 
Working Solution:
1. Right click Witech Diagnostic Application-> Properties->Open file location
wiTech MicroPod 2 V17_04_27 is not registered-02
 
2. Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open app-config text file
wiTech MicroPod 2 V17_04_27 is not registered-03
3. Find out "VerificationHash", then the followed "Value", change the first number to any value i.e change 6 to any number between 1-9.
Then save the text file. (Very important!!!)
wiTech MicroPod 2 V17_04_27 is not registered-05
 
Run Witech Micropod II software.
If it still display message" an internal registration error has occurred ", just close this windows to ignore it.
wiTech MicroPod 2 V17_04_27 is not registered-06
 
Tick off " Offline work" at the left corner of screen, then you don't need to login.
Click on "Finish".
wiTech MicroPod 2 V17_04_27 is not registered-07
Problem Fixed.
Go on using wiTech MicroPod 2 to diagnose or program Chrysler.

wiTech Micropod2 red light flashes microprocessor 1 isunresponsive solution:

Problem:

I was ready toconnect thewiTECH2 Micropod 2interface todiagnose Chrysler 300M, but after i connected the adapter with laptop, the MicroPod2 indicator light flashed and software prompted error message “microprocessor1isunresponsive”. What’s the problem

Possible cause:
1.Software is not compatible with hardware/firmware.

We have several wiTECH2 Micropod 2 Chrysler diagnostic scan tools clone (SP271-C,SP271-B,SP271), they are made by different manufacturer. Software cannot be mixed used. i.e SP271-C wiTech software can work with SP271-C Micropod II firmware.Please use the default software CD in package.

2. Incorrect connection

Please follow the correct steps to connectthemicropod2

  1. ConnectwiTech Micropod2to vehicle first
  2. If the red indicator light turn on, then connectwiTech to laptop
  3. OpenwiTech software (if softwaredetect newer wiTech version,it will run an upgrade.Wait the upgrade completed. If it does not prompt to update software to newer version, just run software)

If you connect to laptop first (power by USB cable) and run softwareimmediately, software and firmware will automatically synchronous upgradeand thatwill lead to the firmware failure. MUST CONNCT THE DEVICE TO VEHICLE.

If the red indicator flashes, the firmware is damaged. You have to send it back to repair.

(Solved)Chrysler Jeep Wrangler Vin was updated to PCM using Witech error

http://www.obd2eshop.com/service/solved-cheyler-jeep-update-error-via-witech.html