How to do gm tech2 keypad test

Matched product:

Tech2 Diagnostic Scanner for GM(GM/SAAB/OPEL/SUZUKI/ISUZU/Holden)

Tech2 Diagnostic Scanner for GM(GM/SAAB/OPEL/SUZUKI/ISUZU/Holden)

Latest price:US$459.00
US$349.0024% off
  • Item No. SP23-C
GM Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. It comes with Authentic GM software, if you need other car model, you only need buy one additional memory card. GM TECH2 support GM vehicles till 2013 year. TIS2000 do till 2007 year GM car programming.
1.How to do gm tech2 keypad test?









2.How to do GM tech2 selff test?

1)insert GM card in to card shot og tech 2. 
2) connect the self-test adapter with tech 2, then power on machine. 
3)Enter Main manu then choose F4: tool options . 
4)Choose F3: Self test. 
5)Press exit to continue. 
6)Choose tech2 self test. 
7) Automated VCI. 
8)VCI self test result. 


3. How to do Candi self test?












4.GM TECH2 GM OPEL SAAB SUZUKI Software Screen Display. 









5.How to use GM Tech 2 to adjust steering wheel control(share from a customer of OBD2eShop)
You need so some preparation job in order to achieve this.
–Get the corresponding software before purchase. I mean GM Tech2 is 6 software alternative. Like me, choose Opel software.
— Factory radio has to be installed and have your radio/ immobilizer pin code read
— Tech2 comes with the Candi module and has to have the interface plugged in
–Tech2 can’t have any other GM software installed other than the Opel software card
First of all, you should install the latest software and welcome the main program. The biggest advantage of Tech2 is that it can work without PC/computer by just follow the screen instruction. After that follow the CIM (column integration module) which will ask you for your four digit radio pin number. If you don’t not know or forget your radio pin code number, ask help for the dealer ship or get a pin code reader to read it out.
Then you will be able to see a menu that has steering wheel controls listed at the top and you have to activate the feature. If you fail to do this, just try and locate the CIM module menu.
First time when I tried to find the controls in the infotainment menu, seemed Layoira suggested but failed to locate them there. But soon I featured out that it doesn’t mean Layoira was wrong but maybe she used different software than the current version. Another thing for thought is that the CD30 factory radio did work with the steering wheel controls and the DIC display for those wanting to retain their factory radio.
There are basically three factory steering wheels for this car and two of them have steering wheel controls. I found mine on e-bay’s UK site under Vauxhall Astra.

6.How to Program SAAB DDM with GM Tech2 and TIS2000
Equipment you will need:
GM Tech 2 diagnostic scanner
TIS2000 software (Without this you would not be able to add anything!)

Step 1. Connect GM Tech2 to the OBD port of your SAAB and open the scanner and then go to the main menu.

Step 2. Select “F0 Diagnostics” from the main menu.

Step 3. Select the year of your car. Here I select “2004”.

Step 4. Select model of your car. Here I select “SAAB 9-3 Sport (9440)”.

Step 5. Select “F7: Add/ Remove” in the next page.

Step 6. Select”F1: Control Modules”.

Step 7. Select “DDM” control module in the next page

Step 8. Select “Add”.
Step 9. Select “Checking Security Access Working” and then turn ignition key to “ON” position.
Step 10. Select “Adding Unit”. Wait the system process to 100% and then drive a test.