How to use KTMflash ECU Programmer


How to use KTMflash read Infineon TC1728 eeprom?

Have one KTMflash ECU programmer, you can read many eeprom, this post is on how to read Infineon TC1728 eeprom in step by step procedure.

 

Guide:

  1. Connect KTMflash ECU programmer to the Infineon 1728 ECU box and 52534 adapter.

ktmflash-reads-Infineon-1728-ecu-01

Image 1: Infineon 1728 ECU box

 

ktmflash-reads-Infineon-1728-ecu-02

Image 12: KTMflash ECU programmer

 

ktmflash-reads-Infineon-1728-ecu-03

Image 3: 52534 adapter

 

  1. Open KTMflash software and load Infineon TC1724/TC1728 EEPROM.

ktmflash-reads-Infineon-1728-ecu-04

 

  1. Read password for China ME 17.8.8

ktmflash-reads-Infineon-1728-ecu-05

 

Keep the first switch in the middle position, and press down on the second switch.

ktmflash-reads-Infineon-1728-ecu-06

 

Click on "Read".

ktmflash-reads-Infineon-1728-ecu-07

 

Would you like to use automatic power control (L-line)? click on "Yes".

ktmflash-reads-Infineon-1728-ecu-08

 

Reading password complete, you can save or not as you like.

ktmflash-reads-Infineon-1728-ecu-09 ktmflash-reads-Infineon-1728-ecu-010

 

  1. Start to read TC1728 eeprom (64KB)

ktmflash-reads-Infineon-1728-ecu-011

 

  1. Pull down both two switches.

ktmflash-reads-Infineon-1728-ecu-012

You can see 3 indicators flash.

ktmflash-reads-Infineon-1728-ecu-013

  1. Click on "Identification" to connect the chip.

ktmflash-reads-Infineon-1728-ecu-014

 

  1. Click on "NO", you won't use the automatic power control (L-line).

ktmflash-reads-Infineon-1728-ecu-015

 

  1. Please turn ECU power off completely, wait at least 2 seconds and then power it on.

 

ktmflash-reads-Infineon-1728-ecu-016 ktmflash-reads-Infineon-1728-ecu-017

Then click on "Yes".

 

9 . Click "Read".

ktmflash-reads-Infineon-1728-ecu-018

 

  1. Click on "OK".

ktmflash-reads-Infineon-1728-ecu-019

 

  1. Please turn ECU power off completely, wait at least 2 seconds and then power it on.

Please do as step 8.

ktmflash-reads-Infineon-1728-ecu-020

 

  1. Reading Infineon TC1728 eeprom data 100% OK with KTMFlash ECU programmer.

ktmflash-reads-Infineon-1728-ecu-021