FAQ for the Key Pro M8

key-pro-m8-auto-key-programmer-support-vehicle-list.pdf  (2.5M)

8. Upgrade the unlock files into the device, for the programs will be cleared after locking.

Q2:  I want to use the key pro m8 program keys for 2012 maxima and altima? Is it ok?

A: Yes. Their IMMO system are the same. They are in the supported list of the key pro m8.

Q3: How to use the key pro m8 to read the security code?

A: Here we put Audi A6 as example:
1. Enter the menu and find AUDI A6 


2. Choose "immobiliser" on Vehicle selection, then choose "Auto Cluster"




3. Select ECU Identification



4. Now you can read the pin code



Then 3206 is the pin code for this car.

Q4: How to use the key pro m8 to read the pin code for 2011 Nissan Cube Proximity - MVP & TCODE - PRO?

A: Here is the detailed instruction:
1) Use BCM (CAN) to read the code. Such as 123AC



2) Then enter the code to the textbox.

Q5:How to choose the key pro M8 M8 Key Programmer Dongle?

A5:M8 Key Programmer Dongle Choosing:

 

Dongle A: Available for most of the cars, VW, AUDI, TOYOTA, NISSAN, Alfa Rometoand Bentley.

 

Dongle B Available old Nissan Immo system till 2001.

Dongle C Available for Honda, Acura and Chrysler Immo system.

Dongle D Available for Land Rover and Rover Immo System

 

Dongle E Available for Land Rover Immo System till 2004

 

Dongle F Available for Nissan and Infiniti Immo System till 2004

 

Dongle G Available for Nissan, Mitsubishi and Renault Immo System, new Ford and Mazda non intelligent Chip Immo system are added

 

Dongle H Available for Peuguot Citroen and Commodore series(Including Buick Royaum )

 

Dongle J Avaiable for all Fiat, Lancia, Alfa Rometo immo system  etc, 

 

Dongle K  Available for GM Immo System

 

Dongle L Available for all Ford and Mazda Intelligent chip Immo system

 

Dongle M Available for all Totota Immo system

 

Dongle N Available for  Honda and Acura Immo System

 

Please note: It cannot program Toyota h chip and some Lexus c chip.

 

New version will be released soon, new software will be sent to customers by email.

 

The MVP Key Pro M8 Diagnosis can support almost all car models from European, USA and Asia, you can downlaod the vehicle list from our website.

Q6:Key Pro M8 failed to program old Ford key (solved)

I tried to make new keys for Expedition 2001. I have MVP Pro clone (Key Pro M8), but I cannot see “key programmed” function in the menu list.



In the last step,you go to DIAGNOSTIC MENU,hit second option “KEYS PROGRAMMED”

Step for program old Ford PATS key with the M8 Key Pro auto key programmer. 

KEY PROGRAMMING > 98 1/4 MY

 

a. Clear ALL Fault codes before programming

b. Up to 8 keys can be programmed into the PATS system

c. If programming is unsuccessful,the PATS LED will flash when the key is inserted

d. Newer systems are only supplied with 2 keys. Both keys are required to program further slave keys.

e. Master key can only be programmed using the 2 PATS keys (A and B) with the FDS2000 or the AD PROGRAMMING SYSTEM system

f. In some cases the vehicle doors must be closed to perform the re-programming sequence.

Further slaves can be added without any specialist equipment as follows:

1. Insert key A, and turn to Position 2.

2. Turn back to Position 0, and remove key A.

3. Insert key B, and turn to Position 2.

4. Turn back to Position 0, and remove key B.

5. Insert the new slave key and turn to Position 2.

6. Remove new key. Key is now programmed.

7. Procedure can be repeated after 20 seconds, for up to 8 slave keys.

 

MANUAL PROGRMAMING PROCEDURES DO NOT WORK ON ANY FORD GALAXY VEHICLES.

Q7:How to program 2010 Cruze remote key with Key Pro M8 key programmer

Key Pro M8 auto key programmer support adding keys and making new keys for multi car brands. Here is the step-by-step instruction on program 2010 Chevrolet Cruze remote keys with key pro m8.

Equipment:

MVP Key Pro M8 key programmer (with 800 tokens inside)
 

Connect Dongle G with Key Pro M8 key programmer
 

Select vehicle region: Euro (Europe or USA)

Select program key from: Immobilizer

Select vehicle model on VEHICLE SELECTION menu: Cruze

Turn ignition switch to ON

Key Pro m8 will automatically detect the vehicle VIN information and keys programmed, press Enter key

Select Fault Codes on DIAGNOSTIC MENU and the key pro m8 will detect error codes

Select Clear fault codes

Select Special Functions in DIAGNOSTIC MENU

Check keys programmed: 02 and select Program keys

Manually enter the security code and confirm it

Wait 10 minutes to process

Turn ignition switch OFF and remove key

Open and close driver’s door (The step is very important)

Start to program 2nd key

Turn ignition switch to ON

Wait another 10 minutes

Accept the screen notice

Check engine starts

Key programming procedure is complete

Disconnect the Key pro m8 from vehicle

Q8: How to update key pro m8?

A:Please kindly read these tips before you update your key pro m8:

 

1.Only need connect with computer when you want to update it, and better to use on professional windows XP system and Close the anti-virus
 

2.You can still use the device, if you do not want to update it
 

3.M8 key pro tool software is just used for updating M8 software, not for other devices
 

Next, please follow following steps to update your M8:

1.Install the M8 driver on your pc which can surf on internet,before update tokens or new software. If any questions,
you can refer to the video ‘M8 install driver record.exe’

2.Connect M8 to your PC via USB cable, and power on your device
 

3. Double click’M8 Update Tool.exe’,it can automatically identify the serial number of your device and you just input password
 

4.Click button’open updata file’ and the load file’S1093B1102.m8′,then click button’download’and it lasts about 10 minutes. if any questions, you can refer to the video‘update.exe’

9.Key Pro M8 Programmer Feedback – all include car models & pin code o

Got one key pro M8 at China, received by DHL for 4-days delivery, I spent some time to install, then sit in the car, plug the OBD2 16pin cable to the car and M8, come back to M8 desktop, click the menu, and start to program new key or copy spare key.

keyprom8 works flawlessly like an original:

I'm not a lover of clones nor will i ever be , but keyprom8 is by far the best of the bunch in both proven coverage and ease of use, Ad did a good job of protecting the new releases thus far, so not as up to date as original, but still a lot of coverage. Most locksmiths will agree me that everything I tried with it worked flawlessly as the original.

I tested successfully on old car even before 2006 and both new cars up to 2012 i.e Nissan Maxima and Altima up to 2012 year and they have the same immobilizer system.

ford up to 2010 was excellent even has pats bypass fully working as the original, a real time saver on 4c models, Nissan worked well as did vag renault and peugeot, though you must bear in mind it has the mvp pro functions of 18 to 24 months ago, so anything released since then wont be on it and further updates are unlikely, not the latest vag or ford functions, so wont do precoding on vag and wont do ford 2012 on, the rest is pretty much as the original, i couldnt fault it sadly , id have rather it been a croc of shit, sadly it was decent kit that worked.
 

Read out pin code

I also successfully read out pin code on Dodge, Audi A6, read pin code failure on kia, Hyundai and FIAT.

To get Nissan pin code, additional pin code calculator is needed, Nissan SuperCode is used on old Nissan and Nissan Pin Code Calculator is usded on newer Nissan.

I successfully use Nissan calculator to calculate 2011 Nissan Cube Proximity, here I simply make a instruction: 1) read a code from BCM. 2) input this code (for example:123AC) into the blank box under Nissan Cal software “SuperCode”. 3) Get the pin code at the right box

Tokens are a pain but cheap:

Despite being cheaper tokens, it’s still token based, key pro m8 doesn’t take tokens on that many cars for pin reading, though ford and Renault it does on all.

Tokens are a pain but cheap, buy 50 tokens get 150 free at present, buy 100 get 300 free, thats alot of tokens making it very cheap to use compared to original, thats around 2usd a token only, is this big token sale a rush to sell before they release token free system, or are AD close to shutting them down so selling all they can, who knows with china.