Before Placed order I was hesitated to purchase OBDATAR X300 PRO3 or SKP-900 key programmer to program smart key for my Ford car.

 

Now I’m glad for my choice to X300 PRO3, of course I do not have bad reviews on SKP-900, it is also a powerful and professional diagnostic tool, but I think X300 PRO3 much more suitable for me.

 

3.Program Cadilac CT6 2016 all keys lost OBDSTAR Key Master 

Preparation:

Two smart keys

OBDSTAR X300 Pro3 key programmer

Pin code to car(get pin code by VPC-100 or other calculators)

Instruction:
Connect OBDSTAR X300 Pro3 key programmer with vehicle
Select Vehicles

Select Immobilizer
Select GM
Select GM V30.44

Select Immo/Remote function

Select vehicle make:Cadillac

Select CT6
Select Immobiliser

Select vehicle year:2016

Select All Keys Lost
Press start button once

Put the smart key into the card slot,take other smart key out of the car,press
ENTER to continue.

The position of card slot is as follows:
1.In the armrests
2.Below the cup holder
3.Near the ashtray
4.Glove compartment

Switch ignition off
Configuring the system,please wait

OBDSTAR Key Master require to enter 4-digit pin code
Enter pin code and confirm

Verify the security code
Configuring the system,please wait for about 12 minutes

Erease success

Press start button once

X300 pro3 prompt whether to program next key? Press ENTER to continue

Remove key from card slot and out of car,and change another smart key,put the second key into the card slot

Press start button once

Whether to program next key?

Press ENTER,turn ignition OFF

 

Press start button for 12 sec

Release start button and then press ENTER

Press start button to swtich ignition on

Switch ignition off

Press the brake and press the start button to start the engine

Switch ignition off

Remove smart key,press LOCK,and then press UNLOCK,press ENTER to continue

Test new smart key is working

Program success!

4.OBDSTAR X300 PRO3 program SUZUKI Swift 2013 key without pin code

This blog is guide for using OBDSTAR X300 PRO3 Key Master to program smart key for SUZUKI Swift 2013 without need pin code. Following step by step below will make you a successful key programming in 3 minutes!

Step1. Let’s start from Immobilizer menu: Choose “SUZUKI” then “SUZUKI V30.06” then “Smart Key System” then “Alivio”.

 

Step2. Select “Program smart key” function then choose “Without PIN”

 

 

Now OBDSTAR Key Master will remind you all key will be erased. Press the Enter button to continue and wait.

Step3. Now the security light will blink. Input the current year and month, for example 201609.

And put smart key close to car’s start button.

Press the Enter button. Now you should hear 2 beeps to registered key. Security light is also off. It will show “Program success, whether to program next one?” Press the ESC button to quit. Now it will show “Program over” that means OBDSTAR X300 PRO3 successfully make a smart key for SUZUKI Swift 2013!

 

5.How to Program Remote Key for GM Prisma

Here is the instruction on programming remote key for GM Chevrolet New Prisma by using OBDSTAR X300 Pro3 Key Master auto key programmer.

In Brazil, there’s a Chevrolet model called the Prisma locally produced by General Motors in Gravatai.t’s basically the low-cost version of the Sonic, but it’s actually cool in its own way and, more importantly, it’s been updated for the 2015 model year and now it comes with lots of goodies for a tiny dribble of money.

Instruction:

Connect X300 Pro3 with vehicle via OBD socket

Select vehicle Brand:GM

Select Immo/Remote


Select Chevrolet


Select Cruze (there is no Prisma option under OBDSTAR Key Master Chevrolet list, select Cruze)



Select Without Smart


Select All keys lost


Enter security code and confirm


Switch ignition off for 5 sec, and then switch ignition on

Configuring the system, wait for about 10-minutes
Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed
Turn on the ignition switch.

Whether to program next key?
Switch ignition off , remove the key

Insert a new key, switch ignition on


Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed
Turn on the ignition switch

Whether to program next key?

Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed

Configuring the system, wait for about 45 sec

Turn on the ignition switch

Switch ignition off

Turn on the ignition switch
Program Complete


Start car with new programmed key
It is working.