Original Tablet Key Programmer User Manual
Matched product:
US$429.00€404.68£351.65円66,066.00AU$670.31C$604.25
- Item No. HKSK417
- Free Shipping
Original Xtool X-100 PAD Plus tablet key perform key programming, mileage adjustment, EPB reset, oil service light reset, timing belt service light reset, tire pressure warning light reset , throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.
x100-key-programmer-pad-manual.pdf (1.2M)
here is some extra information of XTOOL X-100 PAD:
1.How to register
2.Customer feedback
3.how to match Toyota remote key
4.how to program SUZUKI Alivio Key
1.How to registerxtool x-100 pad key programmer?
To register original XTOOL X-100 PAD Tablet Key Programmer,login with e-mail address to complete registration.
Please follow the instruction below.
1. Well connect your xtool x100 pad with network/wifi
2. Power up the x-100 pad and welcome tomain interface
3. Press Login account and login with e-mail address
4.It will also require to enter “Activation Code” which you can find on the user manual
5. Completeall information and click “ACTIVATE” button
6. Activation complete brings the x100 pad main menu.
Note: Please DONOT forget your login e-mail address and password. Otherwise we can not help you
2.Customer’s Feedback on Xtool X100 PAD Tablet Key Programmer
I bought the XTOOL X100 X-100 PAD Tablet Key Programmer with EEPROM Adapter from eOBDShop website,
i always buy items from them. To my surprise, i get it 2 days, very fast they ship from usa directly.
These are photos of x100 pad:
there are so many functions as follows:
*key programming
*Mileage adjustment
*Oil service light reset
*Timing belt service light reset
*Tire pressure warning light reset
*Reads keys from immobilizer’s memory
* PIN Code Reading
*EPB reset
*Throttle body reset
*DPF reset
*Battery reset
*Steering angle calibration
*OBD-II diagnosis
*and more
Before you use it, you need to register it firstly, the id and password come with the package
Then the system will then save it and the diagnostic application will start after activation, you need to study these function for some time.
This is special functions interface
Exhaust Gas Treatment (DPF) Features interface
EEPROM Adapter Features interface
And I find an interesting function–-remote diagnosis
I no longer have to worry about how to operate, once I encounter problems and not able to solve them, I can open this application and ask for remote assistance.
If you need to use this, you should click Remote Diagnosis and open the TeamViewer interface. Generate and display device ID. Notice that your partner will also need to download and install TeamViewer. Finally inform your partner of your TeamViewer ID and password to enable them to begin remote access of X-100 PAD.
3.Match Toyota remote key with Xtool X100 Pad
I. Generate remote by
KD900 remote generator
Open KD900 remote maker software
Select Asia>Toyota>Corolla 26041-11h29.433MHZ>Create Key
Press OK when generated successfully
II. Remote Matching with Xtool X100 Pad
Launch X100 PAD application>Immobilization>Lexus Toyota> Remote>Type 2> Program Remote
Switch ignition on and open driver door
Press LOCK and UNLOCK together for 1 sec within 30 sec, press LOCK once
Program success
Test the new programmed remote key
4.Program SUZUKI Alivio Key by Xtool X100 Pad
Xtool X-100 PAD can perform key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis etc. Here obdii365.com engineer will show you how to program SUZUKI Alivio immo key without pincode via X100 Pad key programmer.
Device: Xtool X100 PAD OBDII tablet key programmer
Vehicle: SUZUKI Alivio
Step 1: Prepare
Connect VCI Box with car OBDII port
Switch ignition on and Power up X-100 Tablet to connect with VCI Box via Bluetooth
Step 2: Choose vehilce model
Choose “IMMOBILIZATION” option on X100 PAD main screen
Then agree the Disclaimer
Tap “SUZUKI” and choose “immobiliser”
Next, choose vehicle model. X100 support most Asian, Europea, America, China makes, here we choose suzuki Alivio
Step 3: Xtool X-100 PAD Program keys
Select “Program Keys(Free pincode)”
X100 PAD will remind you after performing this function, all keys will be erased, tap “YES” to continue
Due to we have switched ignition on, so here we just press OK
It is communicating, wait for a while
Press OK to continue
Program success!!! If you want you program another one, press YES to continue. If not, press NO to return
Done! Now the key munber is 1
Finally switch ignition off to complete the program, and click OK to exit the system
Total procedure will be carried out with 3 main steps within 5 minutes, very fast.