V4.3 SuperOBD SKP-900 SKP900 +Hand-held NSPC001 Automatic Pin Code Reader technical support


SKP900 update question: how to update and usb driver not found

SKP900 update question: how to update and usb driver not found

I have win7, and want to update SKP900 key programmer, but have no idea how to update, I connected USB code to the computer with no luck. Should I use the small CD in the package to update?
 
I open CD and try amd64,i386 and Static with found no setup.exe. How to fix?
 
Solution:
 
1.Firstly, make sure you run usbdriver on old windows XP, obd2eshop.com offer the Ghost Windows Xp Professional Sp3 which will be 100% okay, download link: http://www.chinaautodiag.com/download/ghost-windows-xp-professional-sp3-free-download.zip and xp installation guide:
http://www.chinaautodiag.com/download/How-to-install-ghost-windows-xp-professional-sp3.pdf
 
2.Uninstall antivirus software.
 
3.Follow the following steps to update skp900:
 
1.)  Register a member in www.superobd.com
 
2.)  Register your SKP-900 in your member centre in your member centre
 
4.Download the update file in your member centre, and unzip it to get the “update bin file”.
 
5.Download the update tool
 
6..Connect SKP-900 to the computer using the USB cable
 
Install the driver
 
Firstly find out the USB driver, then go to my computer – properties – hardware-  connect manager- USB serial (it is not found), the computer will scan the hardware, then go to complete install the USB driver.
 
7.Run the update tool, click OPEN to open the update bin file
 
8.Click Auto Scan Port button to setup the COM port
 
9.Click UPDATE button to start update.
 
CAUTION: It takes about 37 minutes for a update. DO NOT DISCONNECT THE
 
SKP-900 WHILE UPDATING!
 

SKP900 key programmer YES (Tested OK)

Honda:
 
2013 Acura
 
2008 Honda civic
 
2015 Honda civic smart key all lost
 
2014 Honda CR-V smart key all lost
 
2015 Honda Accord all key lost
 
2015 Honda Odyssey smart key all lost
 
Ford:
 
Ford PATS6
 
2013 Ford Ranger
 
2013 Ford Mustang
 
2013 Ford Edge all keys lost works fine
 
2011-2013 Ford F-150
 
2008 Focus petrol UK model
 
VW:
 
2002 Volkswagen GTI
 
2000 VW Transporter read pin code program key
 
2007 VW Transporter read pin code program key
 
Dodge:
 
2004 Dodge Caravan lost key works
 
2009 Dodge charger add Fobik key ok
 
2008 Dodge Charger works fine
 
Toyota:
 
2009, 2012-2013 Toyota Camry Remote + Transponder
 
2013 Toyota Highlander Remote + Transponder
 
2009 Toyota Land Cruiser add key
 
KIA& Hyundai:
 
2014 KIA Rio all keys lost
 
2013 KIA Soul all keys lost
 
2013 KIA Forte all keys lost
 
2011 Hyundai ix35 remote
 
Land Rover:
 
Land Rover Discovery 3 add key
 
Range Rover 2010 add key
 
Jaguar:
 
2005 Jaguar X-type lost keys
 
2006 Jaguar XJ lost key
 
Jeep:
 
2012 Jeep Compass all keys lost
 
2008 Jeep Wrangler all keys lost
 
Others:
 
2015 Maserati Ghibli read pin code program Key
 
2005 Audi A4 remote
 
2007 Mazda 3 lost keys
 
2006 Peugeot 407 add key
 
2013 Chrysler 200 all keys lost
 
2012 Nissan Altima smart key all lost works
SKP900 key programmer NO (Tested not OK)
2002, 2004, 2014 Ford Fiesta
 
2004 Ford Mondeo
 
2007 Ford Transit
 
2013 – Ford Kuga
 
2011 – Ford Focus
 
2001 Honda Civic
 
2009 Suzuki Swift
 
2007 KIA Picanto
 
2014 Toyota Prado
 
2014 Toyota Fortuner
 
Mazda 3 Axela
 
Land Rover Freelander 2
 
Land Rover Discovery 4
 

How SuperOBD SKP-900 make 2014 Honda smart key?

Step1. Start SuperOBD SKP-900, choose “Immobilizer”→ “Honda”→ “Keyless2”, wait a second for loading.

Step2. Vehicle Selection: choose “keyless System”, it will show tip that “Choose OBD2 adapter and turn ignition on”, turn ignition on then press “Yes” button to go on.

Step3. Function Selection: choose “All keyless lost”, it will show that “Take all keyless out car”, press “Yes” button to continue. Next it will show “Put one Keyless in car”, press “Yes” to continue.

Step4. After that it will show “Press start twice turn ignition on”, press ignition twice then “Yes” button. Next it will show “Press and hold start butt”, press and hold the ignition switch for a while, then press “Yes” button. Now the ignition is on, press “Yes” button to continue. 

Step5. Press the UP button to enter key number, check input value and press “Yes” button. Now SKP900 will show programming.

Step6. Turn the ignition off and turn on again within 15 seconds. Now SKP900 will again show programming. Check if the indicating light is extinguished and press “Yes” button.

Step7. Turn the ignition off and turn on again within 15 seconds, then repeat the above turn off and on actions; it will show “Keyless register complete”. Now SuperOBD SKP-900 V4.2 auto key programmer make 2014 Honda smart key succesfully

4.SKP900 key programmer  feedback :
Here is for USA cars
2013 CHRYSLER 200 – WORKS FINE
2008 DODGE CHARGER – WORKS FINE
2013 FORD EDGE – WORKS FINE
2011-2013 FORD F-150 – WORKS FINE
2013 MUSTANG – WORKS FINE
2012 JEEP COMPASS – WORKS FINE
2008 JEEP WRANGLER – WORKS FINE
2014 KIA RIO – WORKS FINE
2013 KIA SOUL – WORKS FINE
2013 KIA FORTE – WORKS FINE
2009 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2012-2013 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2013 TOYOTA HIGHLANDER – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2002 VOLKSWAGEN GTI – WORKS FINE
2005 – NISSAN 350Z – WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER
2013 FORD FOCUS – DOES NOT WORK
2014 FORD FIESTA – DOES NOT WORK
 

How to solve the no connection problem of SKP-900 ?

Please open your main unit,check this chips,maybe this chips pins is loose.
 

Program Infiniti Q70L smart key BY SuperOBD SKP900?

Step1. Start SKP-900 Key Programmer. Choose “Immobilizer”→ “Infiniti” → “Smart Key” → “Q70L Smart Key 2013”. Then press “Yes” button it will show “Loading”.

Step2. Choose “Keyless System” → “Choose OBDII adapter?” press “Yes” button.

Step3. Choose “Active Steering Lock” →press “Yes” button→ press “Yes” button.

Step4. Here you need OBDSTAR F102 Nissan/Infiniti Automatic Pin Code Reader to get pin code. It’s easy to use. Then enter the Pin Code. After input it will show “Active Success”.

Step5. Back to the “Function Selection” menu and choose “2013 Infiniti Q70L”, then press “Yes” button.

Put the smart key back near to the ignition and turn on ignition, then press “Yes” button. It will show “Adapt Success”, then press “No” button.

Step6. Put the smart key back near to the ignition and press the ignition button for two times, then press “No” button.

Now you successfully make a new smart key for Infiniti by using SuperOBD SKP900 and OBDSTAR F102.
 

How to program 2013 Honda Civic Remote key via SKP900

This blog will guide you on how to program Honda Civic remote key with SuperOBD skp-900 key programmer.
Vehicle model: 2013 Honda Civic

Equipment: SKP-900 key programmer

Detailed procedures:

1.Connect skp-900 to Honda Civic, then insert the car key and turn ignition on.

2.Choose [IMMOBILIZER]->[Honda]->[IMMOBILIZER3]. Then press [YES] button to continue, it will show [LOADING].

3.[IMMOBILIZER SYSTEM]-> [CHOOSE OBDII ADAPTER AND TURN IGN ON], press [YES] button to continue, it will communicate, wait for a while.

4.Select [ALL KEY LOST] and press yes

5.[Insert the key and ign on], press yes

6.Then input key number [1] and press yes

7.The interface pops out, turn off the ignition

8.Then turn ignition on

9.Turn off the ignition again

10.And turn ignition on again

11.Press [YES] to continue and turn off the ignition

12.Turn on the ignitiono. Dne! Adapt key success.