Dialink j2534 cabe with High operational speed, Capable of working with trucks, support wireless BlueTooth, Good value for money.
Dialink j2534 cable work with MultiFlasher ECU Chip Tuning
Top reasons to get Dialink j2534 cable :
- Capable of working with trucks (24V car network)
- Better compatibility with J2534 requirements (*1)
- High operational speed (*2)
- Possible wireless BlueTooth connection
- Good value for money
*1 in comparison with OpenPort software.
*2 the exchange speed of ISO-11898 (CAN) reaches the max capacity of the bus. It is up to 8 times faster than OpenPort operational speed.
Thanks to the built-in microprocessor DiaLink adapter can be used not only as a diagnostic adapter for SMS-Diagnostics 3 software or as a J2534 compatible device but also can be configured for use in the following modes
K-Line — allows to work with any software designed for a usual USB-K-Line-adapter;
D-CAN — allows to work with BMW diagnostic software via EDIABAS (STD:OBD driver) supporting K-bus and CAN-bus;
ELM327 — allows to work with the software designed for ELM327 chip (this mode will be added soon and will be included in the software update).
J2534 compatible adapter;
Being supplied together with the J2534 interface library, Dialink can be used for ECU reprogramming with CombiLoader or for diagnostics with any third-party tools;
Suitable for SMS-Diagnostics 3;
Together with SMS-Diagnostics 3 software it can be used for diagnostics of modern vehicles control systems with the standard SAE J1962 diagnostic connector (connection to other diagnostic connectors is achieved by the use of additional adapters).
12V car network
24V car network
Powered from a USB port of a PC
The full operational range of power voltage is from 8V to 35V which guarantees fail-free operation in any working conditions including trucks.
PC (laptop) connection:
Wireless BlueTooth connection
BlueTooth module provides wireless connection at the distance up to 10 m (Class-II). If the BlueTooth Class-I adapter is used the working distance increases.
Diagnostic connector pins:
2(BUS+)/10(BUS-): J1850 VPW/PWM (Ford/GM/Chrysler...)
6(CAN-H)/14(CAN-L): ISO-11898/ISO-15765 CAN
7(K-Line)/15(L-Line): ISO-9141/ISO-14230 K/L-line (bidirectional lines)
1pc x Dialink j2534 cable