Original Autel MaxiIM IM608
15% off

BMW ICOM NEXT A+B+C NEW GENERATION OF ICOM A2 Firmware version 1.4.0

In Stock. History 333 sold. Item No. SP269

Latest price: US$389.00
Buy Now: US$329.00 15% off
Shipping:
Express Shipping Service    Estimated delivery time: 3-5 Days.See details»
Weight:
2.1KG
Package:
36cm*27.5cm*7.5cm     ( Inch: 14.17*10.83*2.95 )
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details»

Product Description

  1. BMW ICOM NEXT A Latest Generation Diagnostic Head For BMW, MINI, Rolls-Royce BMW-Model.Can Replace BMW ICOM A2, including all function of ICOM A2.Not only can works together with ICOM Software we provided.
  2. But also can connect internet and Printer.

BMW ICOM NEXT A+B+C NEW GENERATION OF ICOM A2

Firmware version :1.4.0
Top5ReasonstoGetBMWICOMNEXTA+B+C:
1. Gbit workshop LAN,backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet supportthis and interface not yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car interface,will cause adaptation costs)
3. Faster start-up times and high throughput,Improved handling
4. Through high-performance,low-power ARM SoC

5.. More flexible OBD cable, Lighted button for logs etc

Note: There is no hdd in the package, you can buy from our shop: BMW ICOM NEXT A+B+C plus V2017.9 BMW ICOM Software HDD ISTA-D 4.04.12 ISTA-P 3.60.2.001
QC Mark:
 /upload/pro/160517001956151848.jpg
YOU have to knowbefore you buy ICOM A2 or ICOM A3 or ICOM Next:

BMW ICOM NEXTvs the old ICOM
->muchfaster inBMWF and G series ..
->supports gigabit Ethernet too to be future proof, there currently is not gigabit Ethernet protocol defined yet for autos. Also it has USB3.0 instead of USB2.0 and a better wifi card.

ICOM NEXT A vs ICOM A2
-> more stable during programming
-> be necessary for the future Gbit cars
-> faster start-up times and high throughput
-> through high-performance,low-power ARM SoC
-> improved handling
-> more flexible OBD cable
-> lighted button for logs

ICOM A vs ICOM A2 vs ICOM A3
Modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. And robust aluminium case
will help to avoid damage when using in harsh environments. It works better in cooling, runs faster and works more stable, not easier broken than older ICOM A.

ICOM A3 can program all units for all BMW series expect media system, and work more stable and has stronger compatibility than ICOM A2, A1.
ICOM NEXT A+B+C Diadnostic Head Overview
Functionally compatible to ICOM A2
Mechanical design similar ICOM A2
Backwards compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)
ICOM NEXT ABC Specifications:
Zeroization of data on tamper detection
Secure supply chain assurance
Key storage using physically un-clonable function
CRI Pass-Through DPA Patent Portfolio
Advanced cryptographic Services
BMW ICOM Next-The Next genareation
ICOM Next – The next generation of its diagnostic hardware was recently announced. Units are starting to trickle in around the world,
as of today they are backordered on ICOM Next A 1,143 units. The price has been reduced dramatically over the previous ICOM A2.
/upload/pro/170628201432176027.jpg
/upload/pro/170628201432176028.jpg

ICOM NEXT A
 /upload/pro/170628201432176029.jpg

ICOM NEXT B

 /upload/pro/170628201433176030.jpg

ICOM NEXT A Inside

/upload/pro/170628201433176031.jpg

Web interface is the same, Wi-Fi interface is Atheros AR9382 based mini PCI-E half sized card made by SparkLAN.
Cypress CPU and gigabit Ethernet.

 /upload/pro/170628201433176032.jpg
Package including:
1pc x BMW ICOM NEXT A+B+C
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x LAN Cable
1pc x OBDCable
 /upload/pro/bmw-icom-next-c3.jpg
BMW E71 EGS update failed (Solved)

I came across a post, thanks @ CodeMstr on bmwcoding.com, I put the problem and solution here in order to help more people.

 

Question: I have tried to update EGS software with winkfp, my old assembly number was 7624480, I tried to update to 7644113 I started update procedure with no error when it complete update process 100% it gave following error.

Code:

[21:29:37.157] [2017-08-30] [

[21:29:37.157] [2017-08-30] [

 

[21:51:39.934] [2017-08-30] [

[21:51:39.934] [2017-08-30] [

 

[21:51:39.974] [2017-08-30] [

[21:51:39.974] [2017-08-30] [

 

[21:51:39.981] [2017-08-30] [

[21:51:39.981] [2017-08-30] [

 

I tried 2 times result not changed, my car is not operable now, gives lots of errors about EGS, DSC etc. I used winkfp 5.1.3 on windows 10 x64 with k+dcan inpa cable.

After second process my car gave warning battery is low so I gave up trying I will get a power source for 14 V 15A . it s on the way the better power source i can find is that.

What would you advice me to do, I cannot revert back because I dont have SP_Daten files which includes 7624480 software.

 

Good suggests:

Try to update to newer or older version.

 

Finally, I have solved the problem, thanks for everyone who read this post and try to help me.

I used ICOM next to fix the problem.

 

Not sure where CodeMstr get ICOM Next from, but ensure he get it from China since only Chinese market is available with ICOM next. Here I highly recommendwww.obd2eshop.comwho supplies ICOM Next at a cheaper price and able to pay by Paypal, delivery in one week.

ICOM next here:

http://www.obd2eshop.com/wholesale/newest-bmw-icom-next-a-b-c.html

Not take a real picture, but attach the picture they took, full package with ICOM NEXT, B Most, 20pin Cable, USB Cable, LAN Cable and OBDCable.

bmw-icom-next-package

Not sure what differences ICOM next from ICOM and ICOM A2, but according to their description, you could learn something:

BMW ICOM NEXTvs the ICOM 1st generation
->muchfaster inBMWF and G series ..
->supports gigabit Ethernet too to be future proof, there currently is not gigabit Ethernet protocol defined yet for autos. Also it has USB3.0 instead of USB2.0 and a better wifi card.

Tech support

Install ISTA v4.01.22 Voltage Control tool Step by step

1.E-sys 3.29.0 software1.Easy step to install BMW ENET
 
Latest BMW E-SYS 3.29.0 F-series coding software released here!
Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding!
Compatible with BMW ENET Cable and ICOM.
Note before you download:
ALL links here are free to all, NO pass!
And also try on your own risk!
E-SYS 3.29.0 setup file Download:
https://mega.nz/#!dERyUYCY!tW40F79km2jtLyEcR4e-RIB2Z6t0L2G7zOjlsAd5DcE
gm-tech2-in-carton-package-1
Psdzdata V3.61.5 Lite Download:
https://mega.nz/#!ehEjDLJb!gVbQZGfofR-BVzb_dn7sP1aYxqmtrSKNvmjUDa-kmKY
gm-tech2-in-carton-package-1
E-SYS Launcher Premium 2.7.1 Download:
https://mega.nz/#!F5oSUA5B!OYnxsT6ccYufG9us53ZpXhkJ5FJVys8WRnphvx6p9o0
Tips:
  1. You must uninstall the existing E-SYS version before installing new E-SYS 3.29.0.
  2. E-sys Launcher Premium 2.7.1 is tested OK to launch E-SYS 3.28.1, but for E-SYS 3.29.0, haven’t tested, should work.
  3. E-SYS Launcher Premium V2.7.1 require NET Framework 4.5.2 or above.
After download ESYS 3.29.0 Program, what tools you need for BMW Coding?
BMW ENET Cable : Cheapest option for BMW F-series Coding
BMW ICOM: Allow you to fully diagnose and program more than just do coding)
Recommended: BMW ICOM NEXT or ICOM NEXT WIFI. (Next generation of ICOM A2)
 gm-tech2-in-carton-package-1
Why choose E-Sys Launcher Premium to launch E-Sys software?
E-Sys Launcher Premium allows you to perform FDL coding.
– Increased default memory allocation.
– Enhanced overall System stability.
– Zero E-Sys Configuration.
– Personalized and individualized token.
– Easy-to-use.
Note: With E-Sys Launcher Premium, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly at first!
How to install BMW E-Sys 3.29.0?
(Steps refer to E-Sys 3.26.1 installation)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.
gm-tech2-in-carton-package-1
Set the data path for E-Sys, the default is C:\Data. Click next until the installation begins.
  how-install-bmw-e-sys-3-29-0-psdzdata-guide-5
how-install-bmw-e-sys-3-29-0-psdzdata-guide-7
Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
 how-install-bmw-e-sys-3-29-0-psdzdata-guide-7
The patch folder contains 2 files
how-install-bmw-e-sys-3-29-0-psdzdata-guide-7
Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.

2.Install ISTA v4.01.22 Voltage Control tool Step by step
 
 Here is a DIY guide on setting up BMW ICOM ISTA+ BMW v4.01.22 Voltage Control tool. Simulates voltage of connected interface.
/upload/service/16100773199384.jpg
Free download Voltage Control tool:
Voltage Control tool for standalone ISTA 4.01.22
https://mega.nz/#!z14HBKLT!qB3Jtki7NHsIlYDWfxCnT4bcbTAymWF91A6H6DtR-wo

Voltage Control tool (+ HW mod) for standalone ISTA 4.01.22
https://mega.nz/#!vhomDCbb!dAMLrOgFDKgdoMMQAKWwPz-KSvNsVlZ4Vmt0VkLI6Hc

password: beemerboy88


Installation instructions:

Unblock archive and extract files to \testergui\bin\release.

Create desktop shortcut for the voltage tool.

How to use:

Start ISTA software first (if problems try running as admin).
Run voltage control tool.

Notes:Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.


/upload/service/16100773199192.jpg
/upload/service/16100773199240.jpg
/upload/service/16100773199288.jpg
 /upload/service/16100773199336.jpg
3.Update BMW ICOM Next firmware to V1.40.05 (guide)
Post topic: BMW ICOM Next fw: 1.4 1.40.05 bootimage 1.25.02 download and update instructions.
Free download BMW ICOM Next firmware 1.40.05:
https://mega.nz/!X14TxZYY!6zrJ6og9gR5u-CcGbGtWSpHBCknjhl-LElommEgYSK0
Compatible ICOM Next interface:
  • BMW ICOM NEXT fw:1.4.0 V2017.03 Rheingold ISTA-D ISTA-P (Item No. SP269-1)
  • BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269)
  • Wifi BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269-B)
Tip:To run ICOM Next A+B+Cnewest Rheingold  ISTA-D 4.04.12  ISTA-P 3.60.2.001, ICOM Next firmware needs to be updated to the current SYSTEM IMAGE version: 01.25.02 and current APPLICATION IMAGE version: 1.40.05.
ICOM Next fw 1.40.05/01.25.02 update steps:
  1. Please use internet cable to connect ICOM Next with the computer, and charge ICOM Next via 12V power adapter or connect ICOM Next to BMW vehicle for power.
  1. Use IE Internet Explorer to open http://169.254.33.45:60080/, username/password: root/NZY1150263
  1. Select “Update Firmware”, you can see ICOM firmware version information.
icom manager
  1. Select “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.
  1. Select “Yes” when you get prompt “Write the image file to the flash?”, then ICOM indicator light will turn red.
  1. When it shows “The SYSTEM IMAGE update was successful”, click “Update Firmware”.
update firmware-02
7. Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type “APPLICATION”, click “Send the file”, this will be done in several minutes please be patient.
  1. click “Yes” when you get prompt “Write the image file to the flash?”, then the ICOM indicator light will turn red again.
  2. Complete updating, click “reboot”.
  1. Click “Home” – “Update Firmware”, you will see ICOM Next firmware display the newest version.
Tip:
Make sure your computer obtain IP address automatically.
Done! GOOD LUCK!
4.How to Restore BMW ICOM Next in 12 steps
Here is the customer solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following steps:
Note: DO NOT UNPLUG the BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.
The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.
If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:
1. Please ensure that ALL of the following prerequisites are satisfied:
1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).
1.2. The USB flash drive must be formatted with a FAT32 file system.
1.3. A minimum of 60 MByte free space is required on the USB flash drive.
2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.
ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:
– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)
– or enter the whole path into the Windows Explorer’s address bar and press enter.
3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.
4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.
5. Disconnect the {ICOM Next} from the power supply.
6. Plug the {USB} flash drive into the {ICOM NEXT}.
7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.
8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.
9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.
10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.
11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.
12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.
IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.
All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.
Free download icom next firmware:
ICOM NEXT firmware 3.14.10:
ICOM NEXT firmware 3.14.08:
ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)
Buy more and Save more
Frequently bought together
For any question, please contact us at:
 
Whatsapp: +8618054815707
Email: sales@OBD2eShop.com
Skype: careucar
Hot line: +8618054815707
 
/upload/pro/19032215532488025189.jpg

How to make purchase on obd2eshop?
shopping process in obd2eshop