2.Before buying this diagnostic tool, I hesitated for a short time until the great functions fascinated me. It works on cars from year 1996 to 2013,
but only available to part of 2013 cars and very lucky my car included. Moreover, Reading all the information relating to Renault, Automatic test of all computers,
Airbag test and many other functions make me dazzled.Well, finally I got from site here:http://www.obd2eshop.com/wholesale/renault-can-clip-diagnostic-interface-b.html
Cost me nearly $95 and I received package three days after order.Everything intact! It was a perfect purchase experience I thought until I hit the trouble no “Register me now”
options when I register Can Clip V159. Obviously I’m a newbie, thanks to the nice Customer Care told me how to solve this obstacle.
3.Can CLIP V170 Test Report:
Cover Renault car from 1998-2016, accessible to ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I and so on.
B.Renault can clip reprogramming (OK)
Clip will tell you if there is a new version to install, depending on what version of Renault reprog you have… if you do not have reprog, the only way to find out if there is a new version, is to with a diagnostics machine read the actual version installed. As for the benefits, new versions are usually released to resolve glitches that have been in the mean time discovered, to improve drivability, fuel consumption etc… also as the engines get worn and old, new software can adjust things to make is drivability a bit better… most of the times you will not see any difference after a software update, unless a real obviously glitch has been identified and a new version has been released to resolve it. I hope all the above makes some sense, and somehow answers your question…
Renault can clip key programming & ECU programming (No luck with can clip V170)
The Renault-COM diagnostic programming tool is verified ok to perform key programming and ECU programming.
It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.
CLIP V170 is running automatically
Click the laptop icon (FIRST INSTALLATION) in CLIP V170 interface.
Click on “I accept…agreement” and click Next.
Select country. (here, select OTHER COUNTRY). and click on Next.
Select a setup language and click Next.
Manufacturer: Renault. click Next.
Click Next to begin copying files.
Updating your system…
Next to install Windows Resource Kit Tools
Click on “I agree” then Next
User information: Next
Finish to install Windows Resource Kit Tools
RESTART your computer
RESTART your computer
Finish installation of CLIP 170
Renault can clip installation success
Q1: Renault Can Clip all four indicator light flash, but when I enter the diagnosis menu, the CAN indicator light off and can't establish connection, while the other three ones go on flashing. What should I do
A1: there are two solutions: 1) try to install the software on a laptop (PC), no connection with power. 2) Try to diagnose K-line protocol car, if it works, but can't diagnose CAN BUS car, advice you return back to us for check.
Q2: Renault CAN CLIP used to work, but after I reinstall the software, it always displays an error message reading "You must register your clip"
A2: It also needs to register after you reinstall the software, this error picture suggest that you did not install the software properly, please watch Renault can clip video in the "Video" column, the video shows step-by-step install Renault Can clip.
Q3: How can I change English into French
A3: When install the software, you can select the French, but after you complete installation you cannot change the language. So, you have to uninstall the software and reinstall it, during installation, select language French.
Q4: I try to open Renault can clip CD in several different computers, nothing in the CD.
A4: Check whether it has the carving trace at the back of CD, or if the CD Boot Sector is broken.
Q5: I try to install the CAN clip software on different computers, but it always shows me this error reading "SPX CLIP Registration Client" as the following picture shows.
A5: Please follow our video or PDF instruction to correctly step-by-step install the software, and also install the software on the computer with Win 7/8/10 operation system, better American English Professional version system.
Q6: Does Renault Can clip work with Renault Megage 2 Phase 2 2008-2010 Can it read out and set Wheel valve information Can make key and support wiper blade
A6: Renault CAN clip only support diagnosing, it can't make key.
Q7: Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If it is any problem of these two situations: reconnect, wait about 10 seconds before verification.
A7: Please follow the next two instructions to solve the problem:
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2). the computer USB interface does not work, try to use another one.
Q8: Does Renault CAN Clip support analyze and test the status of Renault Megane II 2003 year up, and test the switch of electric windows.
A8: yes, it can do.
Q9: When I try to program with Renault CAN Clip, no communication, what’s the problem
A9: Renault CAN Clip we supply only support diagnosis, not support programming.
Q10: How to install Renault software
A10: when you install the software, firstly please exit the antivirus software, and you’d better install it on the computer with Win 7/8/10 system, then follow our instruction and video to install Renault CAN Clip driver.
Q11: Can it do my car NENAULT of 1995 Thanks.
A11: Yes, it can do Renault cars before 1996, but please tell me your car information in details, and then I can check for you!
Note: you may get error if you didn't follow the next steps.
Firstly: download all parts
Second: choose all .zip parts, right click and unzip to current folder
Thirdly: Choose all .rar parts, right click and unrar to a folder.
Finally, you can check all files in a new folder.
Check the attachment about " Renault CAN Clip setup instruction,Renault Clip setup manual,Renault supported language and compatible car market".
Renault Can clip setup three main steps:
First step: set your PC language as English.
Second step: install "Crack".
Third step: install “setup.exe”, at this step, you can select the language you want.
1). Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up Renault CAN Clip software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our Renault CAN Clip software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2). Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
1. After finish Installation, DO NOT run your CLIP!!!
2. Copy the RSRwin.ext to C:\CLIP_X91\Lib\Application\
3. Then run your CLIP, choose "Register me now" and in the next Windows, please select "NO"!
4. Use this Key for Registration:
Renault can clip is not only a scanner and diagnostic tool, but it also has some special functions like reprogram Renault ECU.
This blog will show you how Renault Can Clip reprograms a fuel injection ECU step by step.
How Renault CAN Clip diagnostic interface re-flash/code Renault injector ECU?
Step1. Install Renault CAN Clip diagnostic software. CAN Clip V160 is the newest version now. This blog is a detailed how-to guide:
Step2. Connect CAN CLIP interface with vehicle via OBD socket. Select the reprogramming page. Obtain the VIN of the vehicle automatically. Select the reprogramming button.
Step3. Click “SELECT THE COMPUTER TO BE PROGRAMMED” then “SELECTION” then click validate.
Step4. Input the Repair Order and the vehicle Technical Specification code then click validate. After that make sure two things done: 1. Connect battery charger to the car. 2. PlugCan Clip Renault into the mains.
Step5. There will be a tip “Select programming mode”, choose “CD-ROM”.
Step6. Select the number for the software to download depending on the recorded operation commons, then confirm, then click “Software reference” and press Validate
Step7. Input vehicle AFTER SALES REPROGRAMMING CODE then press Validate. need use Renault Pin Extractor to calculate AFTER SALES REPROGRAMMING CODE by request code. Here is the Renault Pin Extractor Zip file for you:
Now it is programming. Please remember no operation on the vehicle or on the tool. This procedure will last for 5 minutes. Wait until the procedure is complete
Then reprogramming is done! Return to the home page and save result. Next exit the CAN Clip software.