Multi-language V46.02 SBB Key Programmer is a new portable key tool for programming keys in immobilizer units on vehicles. Due to its integrated hardware, SBB needs no more than the OBDII cable provided to carry out a wide range of functions:programming new keys
Latest Version SBB Key Programmer V46.02 Multi-language
Top reasons to get SBB Key Programmer :
1.Software Version: 46.02
3.Support Toyota G Chip
4.Read Pin Codes for some cars
5.Support Toyota, Honda and Ford models (up to 2014)
6.It is a new generation of the SBB Key Programmer
1. If SBB fails to adapte key, pls disconnect OBD16 adapter and car, after 10 seconds connect again, otherwise vehicle immo system may get damaged and SBB will be locked too
2. Need pin codes for Ford and Nissan
Versions SBB V33.02 vs. V46.02：
1. Programming new keys
2. Reading keys from immobilizers memory
3. Deactivating keys no longer in the car owners possession
4. Operation by means of a menu guided programming
5. Programming new remote controls
6. Software with full database containing all the most important vehicle make
How to use SBB Key Programmer
SBB key programmer is used to copy chip according to car model, and it is used to program keys, not clone keys, you only need to insert SBB 16-pin interface into your car OBD2 diagnostic seat, then read out immobilizer pin code from immobilizer dump/EEPROM of the car before write it into new blank key. When programming For Ford vehicle,no need pin code.
Step 1 :
Before opreating SBB key programmer, please insert the blank new key into your car keyhole;
Step 2 :
Turn on ignition switch;
Step 3 :
Insert SBB 16-pin interface into your car OBD2 diagnostic seat.
Step 4 :
Follow the instructions showed on the SBB screen.
SBB Key Programmer FAQ:
Q: Why SBB do not have lots of connectors
A: This product can directly connect with the car's OBD2 16pin connector.
Q: What type of cars can this product programming
A: SBB is a univeral key programming tool.It can do lots of cars,but to detail car compatible list,there is a file on our website or you can contact digiobd customer service.
Q: If it can do all model list below the brand.
A: It can do most models till to 2010 year,but not all models. If you need confirm eaxct model,just contact with seller.
1pc x SBB Main Unit
1pc x OBD II cable
1pc x AC adapter
1pc x CD with user manuals
Jeep Cherokee Immo program key with SBB V46.02 firstly, finally solved. Hope it helps.
a 2006 2.8crd Cherokee Sport
Key programmer to use:
The car was sent to an engine builder for head work and now has a non start problem.
The car will not crank or start and the immo lamp is on and not flashing when the key is on.
I have tried using SBB to reprogram the old key and also a new id46 chip both attempts have failed and SBB says no keys are programmed.
i have checked power and ground pins on the skreem and pcm and both are ok.
I note that SBB shows only 10.65v when connected to the dlc , battery voltage is 12.5v.
Replaced ECU and skim module and problem resolved.
Looks like the boost starter had caused ECU or skim corruption.
No one had owned up to connecting up reverse polarity or flashing live to the ECU casing but I suspect that to be the case.