Scania VCI 2 replaces older Scania VCI i. It is used togerther with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose latest Scania trucks, buses and other heavy vehicles.
VCI 2 SDP3 for Scania Truck Diagnostic Tool
Get VCI 2 SDP3 for 3 Reasons:
1.Updatable software: Latest Software version: 2.27
2.Different languages available:
English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.
3.Best scanners for Scania vehiclesScania VCI 2 support Scania vehicles after 2005 to latest. Used together with Scania Diagnosis and Programmer 3 (SDP3) software to diagnose and troubleshoot Scania heavy vehicles and trucks. Basic function is diagnose.
If you want to diagnose Scania vehicles before 2005, please choose VCI1 diagnostic tool for SCANIA.
1.This item comes with V2.17 software and USB dongle ,but it can also work with V2.20/V2.27 software,we will send you the download link after you place the order.
Please note that V2.20 is required to be installed under Windows 32 bit.(The v2.20 is not stable, we suggest use the old version)
2.The use of the V2.17 software requires a PC, a USB key and a VCI2. After connecting VCI2 to the PC and starting SDP3, you can access information about VCI2 by opening the menu under View. This works regardless of whether VCI2 is connected to the vehicle or not.
3. Buyers who have V2.16 version Scania VCI 2 can directly use the V2.17 software.
If your Scannia VCI 2 is V2.15, and you want to update it, please buy new software and Dongle, because the previous dongle can not be matched with the new software.
Go to this link: V2.17 Scannia VCI 2 Software and Dongle
VCI 2 SDP3 Feature:
1.Stored fault codes, proposals for remedial action and delete option.
2.Control unit configuration and settings.
3.Information about electrical components and their location.
4.Input and output signals.
5.Activation of components.
6.Spare part programming.
7.Circuit diagrams.For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
8.Chassis data.The vehicle gives the program a description of itself and how it is configured.
9.User functions..In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.
Customers Feedback ：
The vci2 can make, motor test, compression test, inyector test, take contro of the motor and make test all alone, accelerate and make the test, info for you, a lot of funtions, air pressure control and regulation, truk high, motor rpm, lights, and meny more posibilities modification and control, is perfect in function, wanderfull jod.
Q1: Does this product come with the usb key for the SDP3 software
A1: Yes. This tool come with software and the usb key.
Q2: Can i use this Scania VCI 2 to remove EGR and adblue
A2: No. This main function is diagnose. We do not test other function.
Q3: I watch to try with a Scania P tipe, year 2004, but is not in list, start in year 2005, so its a little complication. VCI 2 is fantastic work for scania after 2005.
A3: This one only work scania vehicle after 2005, before 2005, you need to use Scania VCI 1. One of our regular customer test autocom with Scania year 2004, old conector, not obd, and work for read failure and reset fail, real time test and monitor, fuel sistem pressure control, all work. Or you can choose autocom/Cardiag m8 with truck cables to do.
VCI 2 SDP3 Package Including:
1 pc x VCI 2 interface
1 pc x Scania Industry and Marine diagnostic cable
1 pc x USB dongle
1 pc x CD
How to Connect VCI 2 SDP3 to Vehicles and Computers:
Scania VCI FAQ
1.When you install Scania VCI2 Tester software, if you have these following 3 errors:
1. H0007 USB ERROR,
2. SB BATTERY LOW
3. USB KEY NOT CONNECTED
This means you don't install the software according to the user instruction.
Please read the user instruction again and install the software strictly follow the instrction. And you will have no problem.
2.If you come across such problem as the picture showed which requires you to install the new VCI software.
Please substitute the new AuthorizerUI.dll for the previous one under the C:// installation route.
Please download the Scania-2.20-update-fix-file from our webite.
If the problem still cannot be solved ,please try this:
When you go to the setup 7,please don't copy the SMAPI.dl to the C:// installation directory ,please paste the 2 files to the directory to replace the “SCOMM_SSK.dat” and “SCOMM_SSK_HL.dll”
Then well-connect the device and the vehicle and start the SDP3 software .If the software still asks for VCI update, please copy the SMAPI.dll to the installation directory to cover the old file.
4.As well know, this SDP3 software cannot be updated online, new software is provided by U stick. When you install the software for SDP3 Scania, you meet error prompt like "The software in VCI is not the latest version, click OK to install new VCI software", how to do?
When you install the software for Step 7 (setup 7), do not copy SMAPI.dll file to the installation dictionary of Disk C first. For other file please copy and replace “SCOMM_SSK.dat” and “SCOMM_SSK_HL.dll”, then connect the SDP3 with PC and your vehicles, then open this software and test.
If your laptop prompt you update, then copy and replace SMAPI.dll.