21% off

Best Price XPROG-M V5.55 XPROG M Programmer with USB Dongle Especially for BMW CAS4 Decryption [ Buy SM48-C instead]

Out of Stock. History 478 sold. Item No. SM48-B

Latest price: US$89.00
Buy Now: US$69.99 21% off
Weight:
0.6KG
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details»

Product Description

  1. XPROG-M V5.55 XPROG M Programmer with USB Dongle
  2. 1.No operation system limitation, software can be installed on Windows XP, 7
  3. 2.This is the only version XPROG-M can decypte new version BMW CAS4.
  4. 3.Add new authorization: AUTH-0025 Authorized 11/4/2014

Best Price Newest XPROG-M V5.5.5 X-PROG M BOX ECU Programmer with USB Dongle


Kindly note:
If you want to buy the Xprog with laptop, please go to buy SM48.

 
Best Price Newest XPROG-M V5.5.5 X-PROG M BOX Authorizations:
 
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
Best Price Newest XPROG-M V5.5.5 X-PROG M BOX Adapters:
 
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash

XPROG-M V5.55 XPROG M Programmer  display
 
Best Price Newest XPROG-M V5.5.5 X-PROG M BOX Package List:

1pc x  XPROG-Box Hardware (Aluminum Enclosure) .
19pcs x  Basic Software Authorizations and Programming Adapters Set
1pc x  USB Cable.
1pc x USB Dongle
1pc x  CD with XPROG-Box Software (V5.5.5)

Video

XPROG-M V5.55 XPROG Installation Guide

Tech support

XPROG-M V5.55 XPROG M Programmer technical support
1.How ICOM and Xprog TO fix BMW R56 FRM3

Successfully repaired my dead FRM3 model on my BMW R56, with the MINIMUM cost (xprog and BMW ICOM Winkfp)! Here, i wanna share something useful with you all.xprog
 
Note: The setup below did work for me, but i’m not sure of yours. You are at your risk.
 
 
 
My model:
 
2011 BMW R56
 
 
 
Reason for FRM repair:
 
I disconnected the battery and the DME to change the thermostat and when I put it back together the FRM was dead.
 
 
 
Tool i used:
Except the BMW ICOM A2 emulator plus ISTA+ I had, i also was shopping for xprog v5.55 boxes from obd2eshop.com
http://www.obd2eshop.com/wholesale/xprog-m-programmer-dongle-cas-decryption.html
 
Before this whole ordeal of the junk BMW/MINI FRM dying the only software I used was playing with was Carly for iOS and Dashcommand. But cannot solve issues.
 
 
 
BKGD location:
 
BKGD is on the HC(S)12 BDM adapter in the attached photo.
 
Vdd(+5V) = Vcc
RESET = B5
BKGD = B3
GND = GND (do not use the GND that is B0)
 
I think since we are not using the XCLKS and EXTAL flashing works with or without the BDM adapter.
 
Xprog m software installation:
 
I was not able to get this software to work with windows 7 64-bit. I was lucky enough to have an old HDD with windows 7 32-bit.
Before plugging in the xprog hardware go to system properties and change the device installation settings to never install driver software from windows update.
Xprog and FRM fix using Xprog:
Once the software was setup I hooked up the frm to the xprog and tried to make a backup of the existing EPROM via the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_EEE profile. Error partition corrupted. Set the sector to 16. I also made a backup of the existing P-FLASH via the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_P-FLASH profile. I think I got errors the first few times I tried to do this but restarting the program resolved the error.
In the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_EEE profile: erase, blank, open good EEE dump, write, verify, close, new, read.
This took several tries because the read back was still showing as blank.
I removed the BDM adapter and went direct into the xprog box. I also closed the program and reopened it when it kept giving me errors. After I was able to get a good write to the FRM I installed it back into the car and it was working again with a couple of errors (xenon high beam failure and fog light failure).
 
NCS expert & WINKFP setup for FRM:
In NCS expert I backed up the FRM, changed the VO and VIN, reset the FRM to factory and still had the high beam and fog errors. I proceeded to WINKFP to update the FRM and none of the ZB-numbers for my ECU worked. I updated WINKFP with BMW coding tool and the list of available ZB-numbers changed. After WINKFP was able to update the FRM I went back to NCS Expert and copied the VO from the CAS to the FRM and then set the FRM back to defaults. Everything was fixed. Fired up ISTA+ and cleared fault memory.
 
 
 
SOLVED!
Afterwards I hooked the frm back to the xprog and made a backup of the EEE and pflash.
 
My FRM:
R56 HIGH EKS 35 frm3r pl3 6135 3456395 01 23994322 sw141030 hw07 5324828c5
mc9s12xeq384mag
3m25j
Internet file:
R56 HIGH EKS 35 frm3r pl3 6135 3456987 01 23994322 sw156033 hw11 5324828r5
 
According to realoem parts 61353456395 and 61353456987 are Bilaterally exchangeable.

 /upload/service/xprog-repair-frm3-1.jpg

 /upload/service/xprog-repair-frm3-2.jpg

/upload/service/xprog-repair-frm3-3.jpg

 /upload/service/xprog-repair-frm3-4.jpg
 
Buy more and Save more
Customers who viewed this item also viewed
For any question, please contact us at:
Whatsapp: +8618054815707
Email: sales@OBD2eShop.com       
Skype: OBD2eShop.com
Hot line: +8618054815707
How to make purchase on Obd2eshop?
shopping process in OBD2eshop