Dolphin II XP005L is quite a smart and easy Xhorse Key Cutting Machine. The HU66 key cutting turns out to be accurate and workable.

This is an Xhorse Dolphin XP005L Review for the first time to cut a VW HU66 key. I have an original working key, so will test its decode function as well.


Power on Dolphin XP005L machine, there’s a line of light is awaken. Go to

Vehicle database >> Volkswagen >> All key blank >> HU66


Align M5 clamp side B as prompted.

Fix the VW working key on.

OK >> Learn key


Dolphin II machine starts decoding…

The blue light is normally on that means it’s working.

Wait decoding key complete.


Remove the key, and fix a blank key on.

Cut key >> Cut


Dolphin II machine starts cutting.

Just wait…


Cutting key completed.

Clear the debris and turn over the key to cut other side.

Once again as previous.
 
Once cutting was done, take out the key to compare.

It’s same as the original one.

Xhorse Dolphin XP005L Key Cutting Machine can decode & cut Ford Focus HU101 successfully. It also supports to cut by code if you have its actual bitting codes. However, now I can use a working key to read out with the machine directly.

Decode Key

Vehicle database >> Ford >> Focus >> USA – Gen3(After 2011)

It tells to use M5 clamp side A.

Install the working key and tip align 5th position.

OK >> Decode key

Dolphin 2 starts decoding the key…

Once decoding is completed, XP005L screen will display the bitting codes: 2442321355.

Cut Key

Remove the working key to install a blank key for ready.

Press “Cut key >> Cut” to start.

It’s allowed to check preview here as well.

Xhorse Dolphin ii machine will start cutting when instructed.

Just wait then turn over to cut the other side.

All done!

As you can see, it’s same as the original one.

---

2 days fast ship to US. Perfect tool

Xhorse Dolphin XP005L show very good. Great seller recommend you get 5 stars

The XP005L came quickly, everything is fine. Recommend seller