Mercedes Benz ECU ME9.7/272/273/ renew cable can be used to connect KTM100 or KTAG to write the new ECU data into the new Mercedes ME9.7 ME 9.7 ECU ECM Engine, instead of dismantling the new ECU to write the data.
AT200 FC200 Adapters include 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter, can be used with CG AT200 or FC200 ECU Programmer, No Need Disassembly Operation
Free shipping new arrival AUDI J518 Test Line Work With VVDI & VVDI MB BGA Tool
EEPROM & V850 Adapter for CG PRO 9S12 Programmer,can operating 8-pin chips and NEC/Renew SAS and other series chips
Yanhua Mini ACDP BMW MSD85 ISN Interface Board can Read MSD 85 INS and PSW without dismantling DMW and without soldering, Plug and play,intelligent pin detection,data reading and writing are safe and reliable
The Chrysler 12+8 Adapter can work for Autel MaxiSys Elite/ MS908/ MS908P/ MS908S Pro, it is Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.
All 2018 Fiat,Chrysler, Alfa vehicles are equipped with SGW security gateway modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN BUS.
Compatible with X300 DP/ X300 DP Plus/ X300 PRO4/ Odo Master/ X200 PRO2 and other programmers (Autel, Launch X431 etc)
Autel 8A Adapter for Toyota can work on Camry, Prius, Highlander, Tacoma, Senna, Ralink Non-Smart key all key lost,No need to disassemble or replace the immo box,should be used with Autel IM508/IM608 & APB112 Emulator & G-BOX 2
20Pin to obd2 16 Pin Connector is a brand new data link cable, used specifically for connecting your OBD2 scanner and your vehicle with this 20 pin connector which is specifically for BMW's.
High Quality Z-TEK USB1.1 to RS232 Convert Connector, 1.8M
S.1279 module of PPS2000 Lexia-3 Citroen Peugeot module of Nemo,Boxer III,Jumper III.
Only with S.1279 module they you can connect lexia-3 interface and new cars.
ME9.7 ECU Test Renew Cable for Benz Compatible 12 Type Models ECU, best price and qood quality in www.obd2eshop.com
XHORSE XDNP30 BOSH ECU Adapter for MINI PROG&KEY TOOL PLUS, no need soldering for reading the engine ISN, It supports 80% of the BMW F chassis Engine ISN reading on the market.
The Benz ECU connecting DME cable Supports following DME models, MEV9N46L; ME9.7;MED17.7.X; SIM4LKE; SIM266; DE2.0 SIM271; KE2.0 SIM271; OBD; D62M57AOV80; CR3.XX; CRS.XX; CR5; CR6/CR6.XX; CRD.11; CRD.2XX ,Can do ECU testing, ECU programming, clearing and updating
Lonsdor FP-30 Cable Used for Toyota 8A-BA, 4A-BA ,No need PIN code, No need ADP adapter, Smart Key Add & AKL,Support Vehicle Models(2022-): BZ4X, Granvia, Harrier, Venza, Sienna, Wildlander, Sequoia, Tundra, Land Cruiser
GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.