How to Program NETA V 2022 Smart Remote by Xhorse Key Tool Max Pro

Xhorse Key Tool Max Pro Program NETA V 2022 Smart Remote

Xhorse VVDI Key Tool Max Pro works well with KD MAX to generate and program new remote for NETA V 2022 without any issue.

This is original 2022 NETA V smart remote. It can automatically turn on when the working key is inside the car.

Step 1: Generate new smart remote with KD MAX

Select Remote Function>> Smart key remote>> Neeza>> Neeza ID47

Put the new remote into the detection coil to generate

Generate successfully

Step 2: Program new smart remote with VVDI Key Tool Max Pro

Connect key tool max pro and the vehicle via the OBD cable

1.Check original key

Put the key into the coil of key tool max pro

Read out the chip is 47 NCF29AXX clonable

2.Check original frequency

Detect the frequency is 433.4 MHZ FSK

3.Program new smart remote

Select IMMO programming>> NETA>> NETA V>> Smart key system

Press IMMO programming

Select key count to check the current key number is 1

Then select key programming

Follow the prompt to put the new key to be matched into the induction area with the key mark behind the cup holder, and take the other keys out of the car.

Press OK to programming key

New smart remote key is programmed successfully

Check key count again, the current key number is 2 now.

Finally, test the new key

Test the remote OK

Automatically turn on when put the key inside the car

2022 NETA V Smart Remote is added by Xhorse Key Tool Max Pro via OBD successfully.