Does everything I needed and more, at a great value.

Muy rápido llegó y claro cumplió totalmente con mis requerimientos. Y de una muy buena calidad.

Arrived before the due date, very well packed, recommend!

All right, I hope the machine work smoothly.

---

thank you for fast sending me the machine!

You can buy without fear, good seller

Had both Dolphin and Mini Plus ii no issues, good quality cuts and good database overall.

Decoded HU100 key today with Condor XC mini plus, sec e9 can not.

I like about this tool is it has very solid case , Very thoughtful and useful scanner, highly recommend.

Va2T on 107 up to 2013. I done one today. Decoded and cut perfectly. Va6 decode by eye and enter manually on va2eh2 card.

2008 Honda Civic HO01 Key Read and Cut by Xhorse Condor II & Key Reade

Step 1: Connect Key Reader and Condor XC Mini via Bluetooth

Plug the power cable into Key Reader and power up along with Condor XC Mini Plus 2

Find the Bluetooth device signature on the front display of key reader

Tap System setting on Condor 2 main menu

Select Connect optical device

Turn on Bluetooth and choose the key reader name once it appears in the list

Step 2: Read and cut key with and Condor XC Mini 2 and Xhorse Key Reader

Login and connect the device to your Xhorse account to continue

Use an original key to be cloned after pressing open/close jaw button to secure key in straight & vertical fashion

Then select Automotive>> Key blank>> search HON66>> Advanced cutting>> Optical identification>> Identification

If error or mis-read occurs, realign and straighten the key then retry.

Check out your key to the captured scan and select Start cutting 2x then insert the new key blank to be cut to the clamp- mark described on the screen

Then select Cut when you’re ready to begin (cutting depth recommended use default value 1.05)

Use a debris brush to remove all metal shavings from the clamp and key, then flip key and cut other side

Use a debris brush and Keylessfactory Mini Vac to remove all metal shavings from the clamp and Condor XC Mini Plus 2 surfaces when finished cutting
 
Step 3: Program key with Xhorse Key Tool Max Pro

Next move on to vehicle with original and cut keys, and connect Key Tool Max Pro with OBD cable to the vehicle

Power on key tool max pro and select “IMMO, vehicle- make, model and year”

Confirm selection and choose “Add a key”

Confirm the ignition is off, and insert the origianal key and switch ignition to ON

Then back to off as prompted

If system doesn’t repond switch ignition “Off”, and back to “On” again if needed.

Then switch to the new key once system request is made and continue

Continue turning initon off and on as requested

Once key security stops showing confirm it and continue

Programming finished

Now start engine and test remote for key prorgam success
 
Easy work done with Xhorse VVDI Key Tool Max Pro, Key Reader and XC MiNi Condor II Automatic key machine!

 

---

It’s easy and fast to complete this process. Just follow this guide to do step by step.

What tools are required?

Xhorse Condor XC Mini Plus II

M5 clamp

2.5mm milling cutter

1.0mm tracer probe

Xhorse Key Reader

Original key

Blank key

Cylinder
 

How to do?

1. Install M5 clamp, milling cutter, and probe

Turn on the Key Reader and power on the XC Mini Plus 2

Install the M5 clamp and lock it on the key cutting machine

Install the 2.5mm diameter milling cutter first, and then install XCMN08EN 1.0mm Tracer Probe

Push the cutter to the top and tighten the screw

Load probe and push to top and lock
 

2. Connect XC Mini Plus II and Key Reader via Bluetooth

Enter Settings function on the main menu of Mini Condor

Select system settings>> Connect optical device

Turn on Bluetooth to connect with Xhorse Key Reader

Connected successfully
 

3. Identify the original key bitting

Back to the main menu

Enter Automotive function

Select Europe>> Audi>> A6>> HU66 (M5-B clamp)>> Advanced cutting>> Optical Identification>> Identification

• Put the original key into the key reader according to the figure on the screen
• Click ‘Identification’ to start identifying key bitting information and wait for the result

Read the key bitting successfully

4. Cut new key

Put a new key blank on the clamp

Click ‘Start cutting’ on the Identify Result interface

Then click ‘Start cutting’ on the Advanced cutting interface

Click ‘Cut’ to perform the key cutting function
 

The key cutting is complete. Remove the key and clamp it on the other side

Continue cutting until the process is done

After cutting, remove the key and insert it into the cylinder to test

The key is cut perfectly, the same as the original one.

---

i have the condor mini plus ii, and i love it, latest update fixed everything and now works perfect like it did before the last few updates. i plan to purchase the dolphin, easier to transport and runs off battery (i can power my mini with a powerstation, but rather 1 less thing to connect).

I decoded few of the older keys (HU64), so no problems there. Then took picture of the decoding and manually wrote the coding on HU64-3 and were no problems.

This XC-Mini Plus II is worth every penny. I read a few negative reviews but my experience was 100% above expectation.

It does everything it says and somemore!

I got my Xhorse Condor XC-Mini Plus II on time and it was very easy to use and was worth the money. I'm an auto technician and I've been an auto technician for more than 20 years and in my experience this Machine was by far the best.

Excelente servicio al cliente le escribí en solo unos minutos me

Easy to use, lot's of features.

Xhorse CONDOR XC-MINI PLUS II Modify a HON66 Key Blank to VA2T success. 
 

---