CG FC200 Read and Write VAG EDC17CP44 IMMO Off

---

Received. very fast delivery. Great price for the device. It is decent and for the price it does whole a lot . It does bench and boot .

Fc200 is the easiest to use no million wires and very small box and fast . that’s a good update . It also has GPEC2 ; other cloned tools don’t even have it and like bitbox failed to read it 
Edc17cp14 hyundai reading immo off tprot off writing ok.
Md1Cs004 h30 read / write Leon 2021
Edc17C64 golf 7 reading and writing ok.

MED17.7.3.1 FC200 read password ok Flex failed

Bmw edc17cp02 reading and writing ok and with ISN change. Edc17cp14. Nice and easy, butter smooth.

I worked a few ecu with him, everything was very fast without problems.Dodge charger 2020 ZF 8hp TCM. Read and write OK.
Citroen Berlingo 2021 md1cs003 Read and write OK.
Seat Leon 2021 MD1CS004 h30 read and write ok.
VW Golf7 edc17c64 read and write ok.
Audi edc17cp44 read, write and checksum ok.
 

highly recommend it. I did bmw g12 MD1CP002 with no problem on bench
I use it more than Flex hextag kt200 ktag etc. a little works better than hextag there are in price and also brings a lot of development are adding update every time.
 

Get the tool, in good condition, thanks

highly recommend it. I use it more than Flex hextag kt200 ktag etc. a little works better than hextag there are in price and also brings a lot of development are adding update every time.

This is the best aftermarket FC200 ECU Programmer available I have used

This tool is great, I give this scanner five stars !

I recommend this product because it is an original product! I tested it on several ECUs from different car brands. This programmer is dedicated to the new generation ECU where it covers 99% of the Bosch brand and in development on other ECU brands.

In sum, I would say this is as good or better than any of the other units available today. Over time, this in itself will save you a lot of $$$.

Hie thanks i received the cg fc200, so please how can i download the software for it

Really nice ECU Programmer , for half the price !! Really happy best purchase I done !

the tool is very good and very reliable, the user need to know how to use it and what is doing !!

CG Fc200 reads and writes smoothly this VW MED17.1 ECU.

This is MQB DQ250 TCM for Skoda Kodiaq 2020. The manufacturing date of this unit is Nov.16th, 2016.


I have connected CG FC200 to new DSG and computer according to the wiring diagram in FC200 software, and the 12 volts power is connected to FC200 as well.

I am also have already full back up data from the original DSG.

Now I make a folder and name it as donor to read the new DSG data.

Run CG FC200 software

Select Volkswagen (VW)>> VAG_TEMIC_DQ250-MQB TC1766>> 1000 TSI CHZD 116>> Platform

First, click Identification to connect to the server to get the authorization code

Next, read DFlash, Ext DFlash, and PFlash data in sequence

Save the related data one by one

Then, select the original DFlash, Ext DFlash, and PFlash data to write into the new DSG

When clicking the related function ‘Write DFlash’, ‘Write Ext DFlash’ an ‘Write PFlash’, it will show ‘Data is about to be written. This operation will overwrite the original data of the ECU. Please ensure that the data is backed up. Whether to continue.’ Just confirm it and click Yes to continue.

It takes about 2 minutes to complete the writing process.

Alright, write original data into new DSG successfully

CG FC200 perfectly clones MQB DQ250 TCM for Skoda Kodiaq 2020.

Finally, click ‘Disconnect’ in CG FC200 software and disconnect FC200 and DSG, install the new DSG to the car for test, works great!
 

Recently I received this FC200 , It works very good and I like it.

CG FC200 Clone Audi DQ200 Gen2 TCU on Bench Success !!

I recommend this product because it is an original product!

---