Customer reviews

5 Stars of 5, 2 Reviews.
5 stars: 100%
4 stars: 0%
3 stars: 0%
2 stars: 0%
1 star: 0%
Xhorse VAG MQB48 NEC35XX Add Key and All Keys Lost License for VVDI Key Tool Plus, VVDI2 & VVDI Prog

24 Hours Add Xhorse VAG MQB48 NEC35XX Add Key and All Keys Lost License for VVDI Key Tool Plus, VVDI2 & VVDI Prog

US$200.00
  • Item No. XNR-SS408
  • Free Shipping

Xhorse VAG MQB add key and all key lost software license supports read immo data for MQB48 type with NEC35xx chip which cannot read by OBD or all keys lost, support add key and all keys lost (need sync data)

Write a review

by Jorge Suarez on Aug 8, 2023

“Reading the dashboard has a non-zero risk involved due to the way security works on these processors(all tools warn you before reading). Be certain of your soldering and follow the instructions and you should be fine, apparently all the tool suppliers can send you a fixed file to recover dashboards bricked during the read process but hope you don’t end up with that. I’ve done a few now with xhorse and no issues yet.

All the smart key volkswagen products are a bit finicky with the coil and the key position, especially with aftermarket keys. The coil on the Fabia isn’t too bad to get at though, take the steering wheel surround top and bottom cover off and it’s slotted into a recess on the bottom cover.
All the ones I’ve done have been QFP processors and I’ve done the pin lift method. I lift the pin very slightly off the board, then slide some thin plastic underneath it so it sits fairly much where it wants without too much force applied to it, then solder a short length of enameled wire to it, which i tape to the top of the processor, then solder the wires from the tool to that and the PCB. The pin breaks off when you try and lift it way off the board, or have the big wire from the tool hanging off it, by isolating it from the board with plastic but letting it sit where it usually sits + a short jumper wire to the tool wiring that doesn’t move makes it much safer in regards to breaking off the pin.

I prefer lifting the pin to the track cutting method as when I’m finished you can’t tell anything was done.
Pin lift & reading of nec 35xx gives you immo data, sync data needs to be purchased from a third party supplier in case of AKL.”

Replied by ErinWang on Aug 8, 2023
Dear sir,

Good day.Thanks for your Visit

Hoping we can enter a long term business relationship together, thank you.
If you need any help, don't hesitate to contact us.

Whatsapp:+8618054815707

:-) Have a nice day.
Erin
by Charles Culpepper on Apr 6, 2023
Xhorse MQB48 License Read Audi A3 Year 2016 Immo Success

Read successfully Audi A3 year 2016.
 
Simply check the procedure:

The dashboard (only NEC35XX chips are supported).

Chip type is D70F3526.

Connect by diagrams, one 1k resistor is required.

Read cluster data by VVDI PROG successfully.

Load data into VVDI2 software.

Got IMMO data.

If we need to correct odometer, check functions here, MQB48 License supports it.

Credit to Hasan Ali.
Replied by ErinWang on Apr 6, 2023
Dear sir,

Good day.Thanks for your Visit

Hoping we can enter a long term business relationship together, thank you.
If you need any help, don't hesitate to contact us.

Whatsapp:+8618054815707

:-) Have a nice day.
Erin
Total 2 items, 20 items/p, current page 1/1.

Write a Review

Already have an account? Sign in.
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign in first if you want to later edit or manage reviews uploaded by yourself.