How to Duplicate Mul-T-Lock Dimple Key by Xhorse Condor Mini Plus II

Matched product:

US/UK/EU Ship Package Offer Xhorse Condor XC-Mini Plus II Key Cutting Machine and Key Reader XDKP00GL

11 Reviews

US$3,199.00€3,017.62£2,622.22円492,646.00AU$4,998.44C$4,505.79

• Item No. SL482+SL481
• Free Shipping

Xhorse Condor XC-Mini Plus II Key Cutting Machine used with Key Reader XDKP00GL, Users can obtain the specific key bitting and cut key directly via Xhorse APP or Xhorse key cutting machines. This could avoid probe breaking and save much more efforts for locksmiths, Buy together can save a lot, We can offer you a lifetime customer service and tech support. 

Xhorse Condor XC-Mini Plus II can support to duplicate mul-t-lock dimple household key successfully. Read the operation below to learn how to do it.

Tools Needed

1.0mm probe

Dimple internal cutter/ Dimple external cutter

M5 clamp

An original key

Procedure

Step1. 1st Time Height Calibration

1. Install the probe and the dimple internal cutter, fix the clamp tightened;
2. Tap “Settings >> Device Calibration >> Height Calibration >> Start”.

Step2. Key Learning

1. Tap “Household >> Key Brand & Model”;
2. Fix the original key on M5 clamp, tap “Decode key” to start.

The Condor Mini Plus II screen will show bitting details after finished.

Step3. Key Cutting

1. Change blank key to fix it on, close the cover, tap “Start Cutting >> OK”;
2. Turn over the key blank to cut, just repeat previous operations.

Step4. 2nd Time Height Calibration

1. Clean and remove the key. Tighten M5 clamp and install the dimple external cutter.
2. Tap “Dimple(external) >> Probe and cutter setting >> φ6*100*dimple(external) >> Save”.

Step5. Cut External Cuts

1. Fix the half-cutting key on clamp again, tap “Start cutting >> OK”;
2. Turn over key to cut the other side.

Key cutting completed.

Compare 2 keys, all bittings are same. And the new key can open lock.

Done!

More info about Condor Mini Plus II Key Cutting Machine to be updated…