BMW ICOM Next A+B+C Diagnosis scanner with V2021.9 BMW ICOM Software Installed in Lenovo T410 Laptop
US/EU/UK Fast Shipping & No Tax: Check Here>>>
Accept bulk order, For tech support And Wholesale price Pls Contact:
WhatsApp: +86 18054815707
Email: Sales@OBD2eshop.com
Product Description
- No Needs Activation
- OBD2eshop can offer you lifetime customer service and tech support.
- BMW ICOM software pre-installed in T410 laptop, ready to use, save you a lot of time and Money.
BMW ICOM NEXT A + B + C Wi-Fi Scanner
- Improved handling
- More flexible OBD cable
- Lighted button for logs etc
- Replaces BMW ICOM A2
- Gbit workshop LAN, backward compatible
- Faster start-up time and high throughput
- Through high-performance, low-power ARM SoC
- BMW ICOM NEXT is for BMW, MINI, Rolls-Royce BMW model.
- Preparation for Gbit LAN on vehicle OBD(cars do not yet support this and interface not yet defined, ICOM Next hardware adaptation will be necessary for future Gbit car interface, will cause adaptation costs)
ICOM NEXT A+B+C Diagnostic Head Overview:
- Share the same functionality as ICOM A2
- ICOM NEXT A+B+C with WIFI is a redesign of ICOM A2+B+C
- Backward compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)
- Zeroization of data on tamper detection
- Secure supply chain assurance
- Key storage using physically un-clonable function
- CRI Pass-Through DPA Patent Portfolio
- Advanced cryptographic Services
BMW Software Compatible with ICOM Next A:
- ISPI NEXT—BMW ISPI NEXT is the latest generation after service tool for BMW, these brief instructions describe the basic functions of the AIR application (Aftersales Information Research) in Service. For the Diagnostic, it use IPSI (Rheingold) and ISPI Next for Coding Programming functions.
- ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.
- ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.
- Rheingold—Diagnostic and repair guide, including Diagrams and disassembly Figure
- KSD—BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There’s also information about wheels and rims for the various models.
- EasyConnect— Used to Configure the Environment Parameter of Engineer Software for E series, can activate or release ICOM Port
- IToolRadar— Used to recognize ICOM, activate or release ICOM Port
- ETK— Accessories Catalog
- EDIABAS Tool32— Engineer Software for E series, able to run directly
- INPA— Engineer Software for E series, for diagnosis
- NCS Expert Tool—- Engineer Software for E series, for coding
- WinKFP—Engineer Software for E series, for programming
- E-sys — Engineer Software for F series (available for programming and coding)
- BMW Standard tool
- Coding Database
- Coding Tool
- With Engineers Programming
- Compatible with BMW ICOM, ICOM A2, ICOM A3, ICOM PRO+A3, ICOM Next
- Multi-language available in diagnosing, programming and TIS diagram circuit: English, German, Spanish, Russian, Simplified Chinese
- Support Model: It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230, and other laptops with Intel chipset, such as I3 I5 / I7 series.
- ISTA-D 4.30.40
- SDP database 4.30.40
- ISTA-P 3.68.0.0008
- VIN 28/07/2021
- ETK: 2019.12
- KSD: 2019.11
- INPA 5.06
- Winkfp 5.2.3
- Ncs Expert 3.5.1
- BMWAiCoder for BMW Coding 4.6
- E-SYS 3.30, Database V68.0
- DR.GINI B021 Chinese version
- DISV57 and DISV44 for old BMW cars
- Supports BMW motorbikes and electronic cars programming.
- Condition: Used
- Memory: 4GB
- Screen Size: 14.0
- Brand: Lenovo
- Type: Laptop/Notebook
- Memory (RAM): Intel(R)Core(TM)I5 CPU
- Primary Drive: DVD+/-RW Processor Speed: 2.53GHz
- Processor Configuration: Dual Core
- An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
Check below Q&A: (Questions raised by a beginner and answered by a professional)
Q: Is it safe to update software with ISTA on all BMW’s that come through my shop What problems can I run into (assuming I have a good power supply for car and laptop)
A: Depends on many factors, but as long as you use a good ICOM and a good power supply, you should be OK.
Q: Can updates on comfort mode, brick an ECU (or more)
A: As long as you stick to the proposed measures plan in Comfort Mode and your setup (laptop, software, etc.) is solid, there shouldn’t be any opportunity to brick and ECU.
Q: If updates are safe, on what series can I do them BMW F, G for sure..can I do E
A: F, G, and I series and for Motorrad models with vehicle electrical system 2020 (BN2020). E Series programming is not supported in ISTA+, use ISTA/P or WinKFP for individual modules. BMW ENET Cable you may also need.
Q: Updates for Navi maps, can I do them in ISTA also Again, is it safe Do you recommend E-Sys more for this job
A: I have not attempted this with ISTA+, but would assume the process is similar to ISTA/P. I’d stick with ESYS strictly for ease of use.
Q: I have a BMW ICOM A2+B+C with ISTA all OK. And I understand that E-Sys is more complex than ISTA, regarding coding and programming for F-Series, as NCSExpert and WINkfp are for E-Series. You can do coding in ISTA also right for all series Or ISTA does less
A: You need to differentiate between coding and “encoding”. ISTA+ will do “encoding” depending on the programming required. That is not the same as coding (features). I don’t think I’d say ESYS is more complicated than ISTA+, each is different in the way they approach coding/programming.
Hope this blog helps you!
Package including:
1pc x BMW ICOM NEXT A+B+C
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x OBD Cable
1pc x LAN Cable
1 set x Lenovo T410 laptop
1pc x Latest BMW ICOM HDD 500G
Shipment Option and Delivery Time In OBD2eshop
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
- Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
- Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.
For any question, please contact us at:
- Whatsapp: +8618054815707
- Email: sales@OBD2eShop.com
- Hot line: +8618054815707
- Skype: careucar
- Accepting bulk purchases, We can Offer you wholesale price.
- OBD2EShop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.
Tech support
1.Easy step to install BMW ENET E-sys 3.29.0 software
Latest BMW E-SYS 3.29.0 F-series coding software released here!Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding!
Compatible with BMW ENET Cable and ICOM.
Note before you download:
ALL links here are free to all, NO pass!
And also try on your own risk!
E-SYS 3.29.0 setup file Download:
https://mega.nz/#!dERyUYCY!tW40F79km2jtLyEcR4e-RIB2Z6t0L2G7zOjlsAd5DcE
Psdzdata V3.61.5 Lite Download:
https://mega.nz/#!ehEjDLJb!gVbQZGfofR-BVzb_dn7sP1aYxqmtrSKNvmjUDa-kmKY
E-SYS Launcher Premium 2.7.1 Download:
https://mega.nz/#!F5oSUA5B!OYnxsT6ccYufG9us53ZpXhkJ5FJVys8WRnphvx6p9o0
Tips:
- You must uninstall the existing E-SYS version before installing new E-SYS 3.29.0.
- E-sys Launcher Premium 2.7.1 is tested OK to launch E-SYS 3.28.1, but for E-SYS 3.29.0, haven’t tested, should work.
- E-SYS Launcher Premium V2.7.1 require NET Framework 4.5.2 or above.
BMW ENET Cable : Cheapest option for BMW F-series Coding
BMW ICOM: Allow you to fully diagnose and program more than just do coding)
Recommended: BMW ICOM NEXT or ICOM NEXT WIFI. (Next generation of ICOM A2)
Why choose E-Sys Launcher Premium to launch E-Sys software?
E-Sys Launcher Premium allows you to perform FDL coding.
– Increased default memory allocation.
– Enhanced overall System stability.
– Zero E-Sys Configuration.
– Personalized and individualized token.
– Easy-to-use.
Note: With E-Sys Launcher Premium, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly at first!
How to install BMW E-Sys 3.29.0?
(Steps refer to E-Sys 3.26.1 installation)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.
Set the data path for E-Sys, the default is C:\Data. Click next until the installation begins.
Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
The patch folder contains 2 files
Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.
2.BMW ISTA Rheingold Installation Guide Full Steps for Beginner
Here is a detailed BMW ISTA Rheingold installation tutorial with full steps for sharing! If you are just beginner and not so familiar with ISTA, below part will surely help you out!
Note before reading:
BMW ISTA installation method may differ from source and version. This method is only for reference.
If you need tested working BMW ISTA software with installation tech support, you can check:
V2017.03 BMW ISTA 4.04.12 BMW ICOM software HDD WIN7
Step 1
Download and run unblock.reg BEFORE downloading anything else. Then REBOOT the computer, this is a critical step.
Install everything in Prerequisites folder, only if you don’t have a previous Rheingold installation. For 64-bit Windows, install both vcredist x32 & x64 from Microsoft, if not already installed.
Install the following – you can get both from Microsoft:
Visual C++ Redistributable Packages for Visual Studio 2013
NET Framework 4.6
Step 2
Download Rheingold.7z using MegaSync or JDownloader. Once downloaded, check whether “Rheingold.7z” is blocked.
If it is, unblock it. Right click on the file, go to Properties and if files are blocked, then you will see the unblock button as in the picture below:
Extract Rheingold.7z using 7zip ONLY.
Location doesn’t matter, but preferred location is C:\.
If extracting to this location, you will need admin privileges for 7zip before extracting the file. To avoid future issues with admin rights etc. you can also extract this file to the root of a secondary drive, for e.g. D:\
Step 3
Create desktop shortcut from:
C:\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe.
If not, create the shortcut from the location you extracted the files to.
Run the following registry files, depending from your OS:
Ista-prog-x64.reg
Ista-prog-x86.reg
Run the following registry fixes from the C:\Rheingold folder (scroll all the way to the bottom to see these files):
Step 4
Run ISTAGUI shortcut from your desktop as administrator.
When prompted for license, copy the license key from the “rheingold-license.txt” located in “C: \Rheingold”
If/When prompted for dealer ID, enter “1” and ignore following warnings. ISTA+ will close.
Run again ISTAGUI shortcut from your desktop as administrator and verify the databases in Settings > Version tab in ISTA/D.
If you encounter start/running issues, delete the “Rheingold” folder from “C:\”, run “RCleanerV4.4.exe” as administrator and start again from step 2.
Now you can use BMW ISTA diagnostic software!
If you are tired to choose BMW ICOM, prepare a tablet and install BMW ISTA, you can also look at this entire kit:
http://www.obd2eshop.com/wholesale/bmw-icom-next-a-b-c-plusbmw-icom-software-hdd.html
3.Guide to BMW ISTA+ software for Beginners
Part 1: PDF file on BMW ISTA+ installation, configuration and/or usageIt includes installation, configuration and/or usage. The guide attempts to answer fundamental questions on what the BMW ISTA+ is for, what can you do with it and how to configure it so that you can connect to the car and run diagnostics on all cars and in case of F/G/i/Mini/RR cars, programming.
https://mega.nz/#!dZAEVKZb!Hj6mAnPit69-xxGjpgdQxnTcevOjKj7DnXWnVkAG9FI
Part 2: Programming with ISTA+
Programming fundamentals with ISTA+
NOTE: Programming with ISTA+ is only possible with a BMW ICOM and a 70+ amp rated Power Supply. DO NOT ATTEMPT TO PROGRAM WITH ISTA+ WITHOUT THESE TWO ITEMS!
Programming can be accessed via the “Vehicle management” / “Software update” menu.
The planned actions are initially produced in the measures plan. The measures plan determined after the vehicle test can be done directly in the “Comfort” tab, or added to manually beforehand in the “Advanced” tab, then calculated and executed.
The car can be programmed to the latest I level using the comfort software update without any further actions based on the measures plan which has already been determined.
It is not possible to select additional actions manually in this menu.
Initializations and follow-up operations that might be required are automatically added during the measures plan calculation.
All other modes of programming and pre/post requirements are discussed in detail in the Help Document located at ~\Rheingold\Help folder.
Software update
Comfort – as per the suggested measures plan
Advanced – with broadened scope
Additional software (range of functions is not active yet)
Control unit replacement
Before exchange (preparation) – control unit read-out for the exchange
After exchange (subsequent evaluation) – control unit configuration after exchange
Vehicle modification
Retrofit
Conversion
Conversion (only coding)
Backfitting
Immediate measures
Part 3: FAQ: Evaluate SOC and Battery Registration with ISTA+
Checking your State of Charge and Battery Registration with ISTA+
Connect to the car using your preferred cable.
Do a vehicle test
After a vehicle test, go to Vehicle Management –> Service functions tab.
Next select Body, then Voltage Supply
Then select Battery
Here you will be presented with 2 options:
Option 1 is to test SOC. Choose Evaluate Battery State of Charge OR
Option 2 – Register Battery Replacement
Then click on at the bottom right. The ABL/FUB/REP and/or SSP will be populated. Select the FUB or REP to learn more OR select the ABL and run it.
NOTE: If changing battery types, coding is required before you can register battery replacement.
Part 4. FAQ: Steering Angle Sensor Adjustment
Steering Angle Sensor Adjustments:
Go to Vehicle Management –> Service Functions
Select Chassis and Suspension
Select Steering Angle Sensor
Select Steering Angle Sensor Adjustment
Then click on at the bottom right. The ABL/FUB/REP and/or SSP will be populated. Select the FUB or REP to learn more OR select the ABL and run it.
Part 5: From the release notes, following series are supported for programming in ISTA+ and iLevels for each series:
F001 (F0x, RR4, RR5) F001-16-11-501
F010 (F06, F1x) F010-16-11-501
F020 (F2x, F3x, F80, F82, F83, F87) F020-16-11-501
F025 (F15, F16, F25, F26, F85, F86) F025-16-11-501
F056 (F4x, F5x, F6x) F056-16-11-501
S15A (G1x, G3x) S15A-16-07-506
I001 (I03, I08) I001-16-07-506
The following Mini/RR programming is not supported in ISTA+
R056 (R55, R56, R57, R58, R59, R60, R61)
RR01 (RR1, RR2, RR3)
You can use ISTA/P to program these cars.
4.Update BMW ICOM Next firmware to V1.40.05 (guide)
Post topic: BMW ICOM Next fw: 1.4 1.40.05 bootimage 1.25.02 download and update instructions.
Free download BMW ICOM Next firmware 1.40.05:
https://mega.nz/!X14TxZYY!6zrJ6og9gR5u-CcGbGtWSpHBCknjhl-LElommEgYSK0
Compatible ICOM Next interface:
- BMW ICOM NEXT fw:1.4.0 V2017.03 Rheingold ISTA-D ISTA-P (Item No. SP269-1)
- BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269)
- Wifi BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269-B)
ICOM Next fw 1.40.05/01.25.02 update steps:
- Please use internet cable to connect ICOM Next with the computer, and charge ICOM Next via 12V power adapter or connect ICOM Next to BMW vehicle for power.
- Use IE Internet Explorer to open http://169.254.33.45:60080/, username/password: root/NZY1150263
- Select “Update Firmware”, you can see ICOM firmware version information.
- Select “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.
- Select “Yes” when you get prompt “Write the image file to the flash?”, then ICOM indicator light will turn red.
- When it shows “The SYSTEM IMAGE update was successful”, click “Update Firmware”.
7. Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type “APPLICATION”, click “Send the file”, this will be done in several minutes please be patient.
- click “Yes” when you get prompt “Write the image file to the flash?”, then the ICOM indicator light will turn red again.
- Complete updating, click “reboot”.
- Click “Home” – “Update Firmware”, you will see ICOM Next firmware display the newest version.
Tip:
Make sure your computer obtain IP address automatically.
Done! GOOD LUCK!
5.Restore BMW ICOM Next in 12 steps
Here is the customer solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following steps:
Note: DO NOT UNPLUG the BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.
The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.
If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:
1. Please ensure that ALL of the following prerequisites are satisfied:
1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).
1.2. The USB flash drive must be formatted with a FAT32 file system.
1.3. A minimum of 60 MByte free space is required on the USB flash drive.
2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.
ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:
– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)
– or enter the whole path into the Windows Explorer’s address bar and press enter.
3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.
4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.
5. Disconnect the {ICOM Next} from the power supply.
6. Plug the {USB} flash drive into the {ICOM NEXT}.
7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.
8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.
9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.
10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.
11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.
12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.
IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.
All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.
Free download icom next firmware:
ICOM NEXT firmware 3.14.10:
https://mega.nz/#!uZ0XgTbB!0pW25mgpiUuhB2K5gBIxw9O-Yj65aQ1Jh50RdKAD4Is
ICOM NEXT firmware 3.14.08:
https://mega.nz/#!D0cwTTzb!LCeRki-jObvuV9m6UaRsxiGCuHlwv-u33ShJO4ZGXaQ
ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)
