Focus 2008 ....ok
Cmax 2010 ....ok
opel many ecu(bensin and diesel) ....ok
Insignia , Astra 2010 .... error connection
Fiat croma, punto, bravo...ok
Passat b6 2007....ok
hyundai i20 2014 obd...........ok
polo 2014 read dash --fail
octavia ----2007 read immodata fail
skoda fabia clear airbag by 3 wires ok
clio3 2006 dash with 24c04 always change to 137000 0r 131000km cant remember by obd..
astra IV , insignia , octavia 2011 JC online work
Started with clone 4.01, after that bougt 4.74 clone and after a year i bought original dashboard pack. I use both because clone is good for some airbags and opel ecu via obd...it's pretty good tool.
Work fine for Renault Scenic, Laguna, Megane... dash with HC08 and NEC processors with A10 cable without disamble the dash. Work 100%
Megane 1995-1999 Key 100% work
VW Passat 2008 Km 100% work
Opel ECU all work fine
|Product||Carprog with 21 adapters|
|Software version||Carprog V7.28||Carprog V8.21 firmware version (SE53-B)||Carprog V9.31 (SE53)|
|Serial number (S/N)||081105CAR001773I||150428CAR00542UA||081105CAR001773I|
|Online||NO||Yes, it’s the super online version.||NO|
|Activation||Activation after delivery||Activation after delivery||Activation before delivery;
Directly use it
|Operating system||Win XP, Win 7||Win XP,Win7,
|Vehicle coverage||V7.28 carprog support the least models among the three versions.||V8.21 Carprog’s firmware is authorized more cars so that it support the most vehicle models.||V9.31 carprog supports more vehicle models than v7.28|
|Models coverage: caprog v8.21 > v9.31 > v7.28|
|Software||All carprog versions above can work well with ECU-OPEL, OPEL CAN, PSG16, OPEC28 software.|
|Tokens||automatically get token renew after it used up|
|Function||Airbag reset —> BEST
immo (read pin code),
|User feedback||Carprog v9.31 read and erase BMW EEPROM M35080|
|Conclusion||Carprog v8.21 is the best option for the most vehicle coverage and online use, while carprog 9.31 as a plug-and-play kit, is more convenient to use.
Here is the instruction on installing and activating Carprog V8.21 perfect online version China clone on Windows 7 operating system by obd365.com engineer.
Software version: V8.21
Optional operating system:
Windows XP, WIN7, WIN8, WIN10
Part 1 – Carprog 8.21 activation & installation
Establish a new folder named “8.21” on Desktop
Copy all the files in carprog 8.21 DVD disk (E:) to the new folder “8.21” on Desktop
Open “Carprog v8.21” application
Send the hardware ID to the dealer to get the activation code
Run Carprog 8.21 interface automatically, then close it
Part 2 – Carprog v8.21 read EEPROM M35080
Automatically installing device driver software…
Reading device info…
Select EEPROM-> 93C 24C 95x v2.6
Click on the tool icon
Select M35-> 35080-> read/ verify, then click OK
Click the fourth icon on the top icon column for initialization
Ps: Carprog V9.31 no need activation.
If you need to update your carprog full v4,v5,v6.8 or v7.28 to V8.21 online version,you can buy the V8.21 carprog main unit without buying the full 21 adapters.
Q： I try to prepare key for Megamos Crypto with carprog v8.21 clone online version. It it failed and carprog gave me error “Antena not connected”. I test the function with other cars, but all the same error.
A: You are trying to program keys with carprog 8.21, but you do not connected to antena. If you connect to antena and still the same error, it indicates that the function is not yet available.
I have installed and activated caprog 8.21 software. I need to do Caddy 2007 mileage correction. Carprog cannot connect to CAN and showed me connect error (shown ad picture below). I changed laptops and tested on other cars, but still the same error.
1; Please better run carprog software on our operating system.
2; Test 93c46 chip to check if it works good on this function.
If carprog v8.21 online version can read and write 93c46 chip under EEPROM menu. Then the problem is not the operating system. Perhaps the eeprom chip is not supported.