GODIAG GT100 OBD II Break Out Box ECU Connector + BMW FEM/ BDC Test Platform Cable, Buy together can save a lot, obd2eshop.com can offer you a lifetime customer service and tech support.
GODIAG GT100 OBD II Break Out Box ECU Connector + BMW FEM/ BDC Test Platform Cable
- Package Offer for BMW FEM/ BDC Programming
GODIAG GT100 Features and Functions
GODIAG Test Platform For BMW FEM/ BDC Programming
- The cable can be extended, with Optional dedicated adapter
- Able to connect the single modules or multiple modules of the vehicle.
- Convert OBD1 diagnostic interface to the standard OBD2 diagnostic interface
- It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
- It can be connected with any diagnostic tool to tell whether the car communication is good or not.
- Used with BMW-CAS4 Adapter test platform to detect whether the CAS4 key programming work perfectly or not
- GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming, coding.
- It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.
Godiag FEM/ BDC test platform Hightlight:
- Can working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc
- Can program new key when all key lost, can add new key to BMW FEM BDC vehicle on bench and replace FEM / BDC ECU module.
- The BMW FEM/BDC adapter testing platform is used to detect whether the key that is programmed can work perfectly with the FEM or BDC.
Functions for GODIAG BMW FEM/ BDC Test Platform Cable
- Perform the synchronization test for the programmed FEM / BDC and the key
- Provide a test environment for the engineers who professionally recycle FEM/BDC.
- Provide professional engineers with connecting FEM BDC modules and instrument.
- Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
- Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
1. By working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc, Godiag FEM / BDC test platform
2. Allowed to connect this test platform to the FEM / BDC module to test whether it can communicate or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace FEM / BDC immobilizer module
4. Before installing the FEM / BDC module back to the car, it can be used to test whether the programmed key synchronizes with FEM / BDC.
5. Godiag FEM / BDC test platform can help expand business for the Engineers who are skilled to program FEM / BDC key.
When a car owner lost the key, he / she can remove the FEM / BDC module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and FEM / BDC.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between FEM / BDC and the key.
7. This test platform adopts the dedicated OEM FEM / BDC fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of FEM / BDC module.
8. GODIAG for BMW FEM / BDC Programming Test Platform Structure Description
1) DB25 female connector． (used to connect the DB25 male port of GODIAG GT100)
2) Ignition simulated start switch.
How to connect GODIAG FEM/ BDC Test Platform Cable
GODIAG GT100 Indicator Meaning:
1. OBDII Protocol Detector & communication detection
|1. Manufacturer custom
2. SJE1850 wire
3. Manufacturer custom
4. Power grounding
5. Signal grounding
7. ISO9141-2&iso, DIS4230-4K wire
8. Manufacturer custom
|9. Manufacturer custom
10. SJE1850 wire《bus->
11. Manufacturer custom
12. Manufacturer custom
13. Manufacturer custom
15. ISO9141-2 & ISO/DIS 4230-4L wire
16. Car battery positive
1). Connect GODIAG GT100 to the OBDII diagnostic port of the car.
2). When the device displays the voltage, turn on the power switch of GODIAG GT100.
3). Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)
2. ECU connection: single module connection
GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2). The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.
3). To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.
3. Banana plug extension connection:
Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.
4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.
6. When to use the extension cables: The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.
7. Able to power the car when replacing the used battery.
1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
[Notice 1. Turn on the power switch of Godiag GT100. 2. Don't turn on the ignition switch, don't start the car]
2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.
8. The dedicated adapter will be released (help GT100 connect to the special ECU module)
Godiag GT100 Parameter
|Work and power
||Input AC100v-240v, Output DC12V 1A
|Operating temperature range
||-20 to 70 °C ( -4 to 158 °F )
|Storage temperature range
||-40 to 85 °C ( -40 to 185 °F )
||L: 23cm, W:18cm, H:7cm
1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pins
1pc x GODIAG For BMW FEM/ BDC Programming Test Platform
One year warranty.
OBD2EShop OBDII tool online supplier 1)DHL Shipping and Other Express Service:
Shipment Option and Delivery Time In OBD2eshop 1. Shipment from Shenzhen/ Hongkong warehouse
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
2. UK, US, EU Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
After-sale service:We can offer you lifetime customer service and tech support.
- Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement. For any question, please contact us at:
- Accepting bulk purchases, We can Offer you wholesale price.
- OBD2EShop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.