Product Description
V600-BM is a professional BMW diagnostic and programming tool. It has the capabilities of intelligent vehicle diagnosis, ECU programming, calibration and some special functions. It supports all mainstream BMW diagnostic software on the market. It features in high-performance CPU, WIFI dual mode (STA/AP), Ethernet communication.
GODIAG V600-BM BMW Diagnostic and ECU Programming Tool
- Support WiFi wireless connection
- Supports all mainstream BMW diagnostic software
- Support diagnosis, ECU programming, calibration and some special functions
- It features in high-performance CPU, WIFI dual mode (STA/AP), Ethernet communication
- Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next etc.
V600-BM Functions & Features
Features
- With the size of about 108 x 52 x 27 mm, the pocket device is more portable
- Cover a wide range of vehicles and support efficient and reliable diagnostic functionsand a variety of special functions.
- Ensure communication security and can encrypt communication data to ensure device and vehicle safety.
- Brand new industrial design, the shell is made of solid and stain-resistant material, it is more suitable for the automobile maintenance environment.
- Support WiFi wireless connection, high-speed transmission, long-distance transmission, stable signal and strong anti-interference; WiFi can be set as STA or AP mode at the same time, making users work in comfortable indoor environment.
Functions
- Support wired Ethernet connection,can freely switch between 2 modesWAN / LAN.
- ECU programming and calibration. Fully compatible with official diagnostic software
- Multi-task diagnosis: based on the efficient architecture design of diagnosis service software.
- Can perform vehicle intelligent diagnosis, all-system all-function fast diagnosis; can read & clear fault codes, read data stream, actuation test etc.
- Diagnostic feedback: support one-key upload the device logs. If you encounter exceptional vehicle and abnormal function, you are allowed to report the problem to the manufacturer, then the technicians will track and handle your problem.
- V600-BM CAN-FD J2534 can access to all systems of newest For BMW car models to quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming , retrofitting and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features etc.
GODIAG V600-BM Supported Software:
- Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line
- Comes with ISTA-D, ISTA-P, Tool32, For BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool, and you can directly run them
GODIAG V600 Update Schedule:
- Plan to add authorization of Benz, Land Rover, Jaguar, CAN-FD, Toyota, VW, Audi (ODIS software)
- Dedicated Android APP is under development , it will support both Ethernet and WiFi communication.
Support OEM professional diagnostic function of all For BMW series:
- 1 series: 1'_E81/E81/E87/E88,1'_F20/F21
- 2 series: 2'_F22/F23,2'_F45/F46,2'_F87
- 3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
- 4 series: 4'_F32/F33/F36,4'_F82/F83
- 5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
- 6 series: 6'_E63/E64,6'_F06/F12/F13
- 7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
- X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
- X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26
- Z series: Z4_E85/E86,Z4_E89
- I series: I'_I01/I02
- MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60, MINI_F55/F56
GODIAG V600 stand-out Hightlight:
1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT etc, no need to install any driver.)
1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.
2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models
3). Engineer programming & coding software for F series vehicles
4). WINKFP: engineer programming software for E series vehicles.
5). NCS-Expert Tool: engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.
7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicle
2. Provide a variety of communication modes:
USB 2.0
DoIP indicator
Ethernet 10/100Mbps
WIFI/BT 802.11 indicator 150Mbps
ETH indicator
System Indicator
3. Specifications
Suitable power: 7-32 V
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)
4. The Button Function:
F1-Press it for more than 3s to reset factory setting
F2-Press it to restart system
GODIAG V600-BM VS BMW ICOM next
V600-BM Parameters
Shell |
The shell is made of Polyamide.
Size:108 x 52 x 27 mm |
Power Supply |
7-32 V |
Current Consumption |
About 300 mA when the power is 12V |
CPU |
580 MHz MIPS, 32MBFLASH, 128MByte RA, built-in 32G TF card(optional) |
Operating System |
Linux |
WiFi |
150Mbps Wi-Fi 1T1R 802.11bgn |
Bluetooth |
Bluetooth5.0/5.1 |
Interface |
USB 2.0
Ethernet 10/100Mbps |
Indicator |
DoIP indicator
WIFI/BT indicator
ETH indicator
System indicator |
Buzzer |
Sound Pressure Level: MIN.80 dB |
Temperature |
Working:-20 ... +55°C, Storage:-20 ... +85°C |
Protection Rating |
Dust prevention and water resistance conform to IP52 |
Conform to
Electromagnetic Compatibility |
Noise emissions:EN 55011,EN 55022
Anti-interference:EN 61000-6-2, EN 61000-6-4 |
V600-BM is Compatible with the Following Diagnostic Software
BMW ISTA-D Tool32
BMW ISTA-P BMW Coding (not tested yet)
BMW Group ISPI (not tested yet) INPA (not tested yet)
E-SYS
Other versions are being tested, please wait for the update...
Status LEDs
LEDs |
Operating state |
Non-operating state |
|
Normal |
Abnormal |
|
DoIP |
The green light flashes |
The red light is on |
The lights don’t work |
WIFI/BT |
The green and blue lights flash alternately |
The red light is on |
The lights don’t work |
ETH |
The green light flashes |
The red light is on |
The lights don’t work |
System |
The green and blue lights flash alternately |
The red light is on |
The lights don’t work |
Function KEYs
KEYs |
Function description |
F1 |
Press it for more than 3s to reset factory setting |
F2 |
Press it to restart system |
Buzzer
Note: it will sound when V600-BM starts or if there is any abnormal operation.
Package includes:
1pc x V600-BM full set

Shipment Option and Delivery Time In OBD2eshop
1. Shipment from Shenzhen/ Hongkong warehouse 1)DHL Shipping and Other Express Service:- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
2)Yanwen Express: - Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Canada ,Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
3)Normal Registered Airmail Post way- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
2. US, UK, Amazon US, Canada, and Australia Warehouse Shipping: - Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN(No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US , Canada and Australia Warehouse ,which is more convenient for you.
After-sale service:We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.
For any question, please contact us at:
