Launch CRP123X Eite is an upgraded version of CRP123 and creader VII+, Faster! Stable! Has a new processor, Android 7.0, 16GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery.Newly Added SAS Calibration/Throttle Reset/Oil Reset Fucntions, Support 57+ Car Brands including cars, SUVs, minivans, 12v light-duty trucks, gasoline cars, diesel cars, etc
Launch X-431 PROS V5.0 can cover 98% of the market, come with DBScar VII connector, Supports CAN FD and DoIP protocol, full system diagnostics+ 37 special functions+ Auto VIN; using a 2.0Ghz 4-core efficient processor, 4GB RAM + 64GB make diagnosis faster, more stable.
LAUNCH X431 PRO Dyno is a Bi-directional Control OEM All-System Scanner,support CAN-FD & DoIP, AutoAuth for FCA SGW,You’ll affordably repair 99% car issues in one solution: ECU Coding, All System Access, IMMO,Active Tests, 37+ Special Functions, AutoVIN & Scan, Remote Diagnosis, 2-Year Update,covering 100+ brands
X-431 PRO3 (PRO3S+ V5.0) is a 10.1-inch advanced smart car diagnostic device developed based on Android 10.0 system. It uses a 2.0Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery. It runs faster, more stably and lasts longer. It not only supports passenger car diagnosis but also supports commercial vehicle expansion modules, making the diagnostic function more powerful.
👍Android 10.0 👍4G+64G 👍2-Year Free Update 👍ECU Coding 👍All System Diagnostics 👍Bi-directional Control 👍CANFD&DOIP 👍32+ Resets 👍FCA AutoAuth 👍V.A.G Guided Function
Launch X431 PRO3 APEX is the Upgrade ver. of X431 V+ scan tool, X431 PRO3 APEX inherits its stable diagnostic functions and adds more advanced features: topology mapping, 37+ services, online/offline ECU coding, PMI functions for Lincoln & Mazda, etc. Enlarge 1996-2024 vehicle coverage (CAN FD & DoIP, FCA & Renault SGW access, HD truck diagnostics, etc). Newly introduced “Intelligent software updating”. To adapt to increasing diagnostic problems and customers’ repair needs.
Launch X-431 V V5.0 is a new generation of 8-inch smart car diagnostic equipment developed based on Android 10.0 system. The host hardware is strongly upgraded, surrounded by industrial-grade protection, and has super battery life. It is equipped with a 2.0Ghz 4-core efficient processor and 4GB RAM + 64GB ROM large storage to run faster, more stably, and last longer.
X-431 V+ SmarLink HD is a 10.1-inch smart car diagnostic device developed based on Android 10.0 system. It uses a 1.8Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery to run faster, more stably, and last longer. The standard new SmartLink C 2.0 diagnostic connector makes the diagnostic function more powerful. Supports system-wide fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action testing.
Creader Professional 129E is an evolutionary smart solution for passenger car diagnosis. It is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Launch Pad vii Elite is latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 110+ car brands, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII ELITE is a worthwhile investment for repair shops and mechanics.
LAUNCH X431 V+ is a Full System OBD2 Scanner with powerful function: Topology Mapping function+Active Test (Bi-directional Control)+ ECU Coding+ Full Systems Diagnoses+ 37 Service Functions+ Auto VIN + Remote Diagnosis. 2 years free update online + 5 year warranty.
LAUNCH X431 V can replace X431 IV,X431 Diagun 3 and X431 PRO,Supports wifi/Bluetooth, update online,Supports about 69 car brands and whole system of cars.With special function such as BMW idle study, BMW Injection rate adjustment, BMW battery replacement, Nissan matching key.
This is package offer for Launch X431 V+ V5.0 Scanner And Launch X431 X-PROG 3 IMMO & Key Programmer, Buy together can save a lot, obd2eshop.com can offer you a lifetime customer service and tech support.
LAUNCH BST360 Car Bluetooth Battery Tester is a 6V/12V lead-acid battery test clip that supports Bluetooth wireless communication, can be used with X431 V+, X431 PRO5, X431 PAD V/ PAD VII CR919E CRP919X CRP909, It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
LAUNCH X431 PRO5 J2534 Reprogramming Tool With Smart Box 3.0 CANFD DoIP HD and X-PROG 3 Immobilizer Key Programmer, Enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading, and anti-theft component replacement
LAUNCH X431 CRP919XBT Upgrade from Other CRP Scanners, includes a DBSCar VII VCI connector, It come with MTK's chip + doubled memory & battery capacity 5X faster & smoother, 5X-boosted running operation, tons of next-level features, wider car coverage
Support Android 10.0 ✅4G+64G ✅2-Year Free Update ✅2.4G & 5GHz Dual WiFi ✅Wireless Diagnoses ✅2.0 GHz 4-Core CPU✅Bi-directional Control ✅CANFD&DOIP ✅FCA AutoAut✅ECU Coding✅31+ Resets
Diagnosis for Full function of all car series: diagnosis, coding, IMMO, initialization.
Launch X431 IMMO PLUS is an upgraded version of LAUNCH X431 IMMO ELITE, which adds ECU coding functionality.
Supports CAN FD/ DOIP Protocols, newly add AutoAuth for FCA SGW.
CReader Professional 123 is a new generation of core diagnostic product for professional and individual users released by LAUNCH, a DIY diagnostic product whose development is based on DPU platform composed of chip DP431 and JV700 as core components which are independently developed and designed by LAUNCH.
Launch X431 key programmer remote maker Currently compatible with X431 IMMO Plus, IMMO Elite, IMMO Pad, IMMO Pro, Pros Elite, X431 PAD VII, X431 PAD V, Pro3 APEX, Pro3 ACE, CRP919E BT, CRP919X BT, Euro Tab III and more to come, it is able to is able to read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions
LAUNCH X-431 Key Progammer is able to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.
Come with 4pcs Universal Smart Key and 11pcs Super Chips.