Product Description
X-431 GIII X-PROG 3 advanced immobilizer & key programmer compatible with X-431 series diagnostic scanners can read and write keys to the vehicle. X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
Launch X431 G3 X-PROG 3 Immobilizer & Key Programmer
X431 X-PROG G3 Highlights:
- Ship From US/EU/UK, fast delivery, Free tax !
- LAUNCH Official authorized dealer, 100% original
- Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
- X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
- Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
- Compatible with Multiple X-431 Series Diagnostic Tablet (X-431 V, X-431 V+, X431 ProS, X431 Pro3s+, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc)
X431 X-PROG G3 Main Functions:
- Supports MQB
- Update VAG MQB NEC35XX add key & all keys lost NEW!!!
- All-in-One Key Programmer. Integrates Multiple Function Models
- Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
- Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
- Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
- Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
- X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
- X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
Note:
- You can buy MCU3 Adapter to do Benz All Keys Lost and ECU TCU Reading.
- To check detail X-PROG3 Immobilizer key programming list, check list on the official website: https://qcar.x431.com/newqcar/carDes?lan=EN&swId=RESETPROG&page=1&type=3&serialName=Immo Program&area=RESET
- LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) : X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Update Notice:
New Software Update V10.80 (May 25th, 2023)
1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).
2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014
3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)
4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:
1) Added ECU reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
Compatible With Multiple X-431 Series Diagnostic Tablet:
X431-Throttle, X431-Throttle III, X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X431 Pros, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Launch X431 G-3 Functions
- 1. EEPROM read and write
- 2. MCU read and write
- 3. Benz key
- 4. Key Simulator
- 5. Volkswagen's fourth-generation instrument disassembly and reading are all lost
- 6. BENCH mode read engine
- 7. Boot mode read engine
- 8. All Volkswagen 4th generation free accounts are lost
- 9. Reading gearbox data
- 10. Reading and writing of keys
- 11. BMW engine ISN code reading
- 12. BMW CAS4+, FEM chip read and write
- 13. Reading and writing of Audi's fifth-generation steering column chip
- 14. OBD reads MED17 engine
- 15. Volkswagen fourth-generation UDS engine replacement
- 16. Volkswagen MQB engine, gearbox, steering column lock replacement
- 17. Benz engine gearbox wipe empty function
X431 XPROG3 Core Functions
- Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
- Supports the BMW CAS4/CAS4+ module replacement.
- Supports the ECU cloning and replacement for BMW Siemens engines.
- Supports ECU replacement for the fourth-generation of VW/AUDI engine;
- Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
- Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
- Erase the password for Mercedes-Benz engine and gearbox within 3S.11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
- Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
- Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
- Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
X-431 GIII Supported Car Brands:
- Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
- Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Atmel |
NSC |
Fujitsu |
Philips |
Infineon |
Renesas M16 |
MC68HC05 |
Renesas M32 |
MC68HC08 |
Renesas M32R |
MC68HC11 |
Renesas M32C |
MC68HC12 |
Renesas R8C |
MediaTek |
Renesas V850 SPI |
MicroChip |
Renesas V850 UART |
Nordic |
Samsung |
ST |
SiLabs |
Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
4Wire |
GI |
Numonys |
SST |
Adesto |
GigaDevice |
OKI |
ST |
AKM |
Grundig |
ON Semi |
Toshiba |
Altera |
HOLTEK |
Other |
Winbond |
Amic |
Hynix |
PCT |
Xicor |
Atmel |
I2C |
Philips |
xUSSR |
BOSCH |
ITT |
Pioneer |
YMC |
Catalyst |
KHIC |
PMC |
Spansion |
Chings |
Macronix |
Ramtron |
SPI |
Dallas/Maxim |
MicroChip |
Rohm |
NEC |
EON |
Micron |
Samsung |
NSC |
ESMT |
MicroWire |
Seiko |
Ford |
EXEL |
Mitsubishi |
Siemens |
Fujitsu |
Fairchild |
Motorola |
Sony |
X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)
Launch XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Launch X431 X-PROG vs. X-PROG3
Item
|
Launch X431 X-PROG
|
Launch X431 X-PROG3
|
Read/Write EEPROM
|
No
|
Yes
|
Read/Write MCU
|
No
|
Yes
|
Mercedes Benz Keys
|
No
|
Yes
|
Key simulator
|
No
|
Yes
|
VW 4th IMMO Dump Mode All Keys Lost
|
No
|
Yes
|
Read engine in Bench mode
|
No
|
Yes
|
VW 4th IMMO enumeration all keys lost
|
No
|
Yes
|
Read gearbox data
|
No
|
Yes
|
Read and write keys
|
Yes
|
Yes
|
Read BMW engine ISN code
|
No
|
Yes
|
Replace OBD reading component
|
Yes
|
Yes
|
Read & Write BMW CAS4+ and FEM chips
|
No
|
Yes
|
Read engine in Boot mode
|
No
|
Yes
|
Read & Write Audi 5th generation steering column chips
|
No
|
Yes
|
Specification:
Interface |
DB26, DB15 |
Input Power |
DC12V |
Working CurrentMax |
500mA |
Power Consumption |
5W |
Storage Temperature |
-20℃~70℃ |
Working Temperature |
0℃~50℃ |
Package List:
1set x Launch X-PROG 3
Shipment Option and Delivery Time In OBD2eshop 1. Shipment from Shenzhen/ Hongkong warehouse 1)DHL Shipping and Other Express Service:- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
2)Yanwen Express: - Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
3)Normal Registered Airmail Post way- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
2. UK, US, EU Warehouse Shipping: - Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
After-sale service:We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.
For any question, please contact us at: OBD2EShop OBDII tool online supplier- Accepting bulk purchases, We can Offer you wholesale price.
- OBD2EShop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.