OBDSTAR X300 Classic G3 (KEY MASTER G3) Key Programmer with MP001 and P004
OBDSTAR X300 Classic G3 is the new generation intelligent scanner of OBDSTAR, which fully inherits the many advantages of OBDSTAR in automobile/commercial vehicle technology, such as wide coverage of car models and various functions, and comprehensively increases the programming functions of E-car, motorcycle, marine (jet-ski), etc. A good helper for automotive locksmith master.
The G3 expands on the features and functionality of the OBDstar X300 DP Plus key programming series and will have the ability to add the functionality of the OBDstar Odomaster mileage correction, P50 airbag reset, MT series test platform and DC706 ECU ECM TCM BCM BSI cloning tool.
OBDSTAR X300 Classic G3 Features:
Note:
X300 Classic G3 Support Functions:
✅ Programming IMMO(Keys)
✅ IMMO OFF
✅ Remote Test
✅ R/W EEPROM/MCU
✅ R/W Transponder
✅ Unlock ECU
✅ Make Dealer Keys
✅ ECU Advanced
✅ Make Start Keys
✅ OBDII
✅ Renew Key
✅ Mileage correction (add-on module)
✅ ECU/TCU Cloning (add-on module)
✅ Airbag reset (add-on module)
✅ Test platform (add-on module)
Supported Vehicle types
Car, HD, E-Car, MOTO, Marine (jet-ski)
Advanced Functiosn
1. Support MOTO key progarmming (no need pincode) function for HARLEY, TRIUMPH, DUCATI, KAWASAKI, HONDA, SUZUKI, YAMAHA, BRP, INDIAN, DAYANG, APRILIA, PIAGGIO, VESPA, DERBY, GIRELLA, GUZZI, PEUGEOT, ITAJET and others;
2. Support Marine key progarmming function for BRP, KAWASAKI, YAMAHA and others;
3. Support E-Car key programming function for LI, NETA, LEAPMOTOR, SERES, AITO and others;
4. Support unlock ECU function for ALFA ROMEO, FIAT, CHRYSLER, DODGE, JEEP and others;
5. Support programming solutions for SMART 453 that have lost all keys and all functions have been disabled;
6. Support programming solutions that have lost all keys and all functions have been disabled for RENAULT CITY K-ZE, KWID, SANDERO, TRAFIC, TWINGO, LODGY, DUSTER PH3;
7. Support pincode reading function that have lost all keys (No risk, and will not turn your car into a brick) for Renault post-2015 ESPACE, KADJAR, KOLEOS, MEGAN, SCENIC, TALISMAN and Samsung QM6\SM6 models.
OBDSTAR X300 Classic G3 (Key Master G3) vs OBDSTAR X300 DP Plus
Products Details |
X300 DP Plus C | X300 Classic G3 | |
Hardware | Operation system | Android 5.1.1 | Android 11 |
OTA | x | √ | |
Screen recording | x | √ | |
Wireless screen casting | x | √ | |
CPU | qual core ARM cortex A9 1.4GHz | Quad-core 64-bit Cortex-A55 2.0GHz | |
Battery | 3700mAh | 9000mAh | |
Storage capacity | 1+32GB | 4+64GB | |
LCD | 8.0 inch | 8.0 inch fully laminated sunlight readable screen | |
Camera | Rear camera 500W pixels | Rear camera 800W pixels, auto-focus | |
Bluetooth | Bluetooth 4.2 | Bluetooth 5.0(Compatible with BT 4.2) | |
External interfaces | x | RJ-45√ | |
x | HDMI√ | ||
TYPE-A | TYPE-A,TYPE-C | ||
WiFi | 2.4G | Dual-band 2.4G/5GHZ | |
VCI | STM32F105 | STM32H723 | |
CANFD Adapter Required | CANFD built in√ | ||
x | DOIP built in√ | ||
x | Low Speed(Fault Tolerant) CAN built in√ | ||
x | RS232、RS485 built in√ | ||
All other common protocol types | All other common protocol types | ||
RFID | P001 Required | Built in√ | |
Remote Test | RT100 Required | Built in√ | |
Renault Converter | Renault Converter Required | Built in√ | |
Weight | About 1kg | 1.5kg (main unit) | |
Dimension | 254mm*174mm*35mm | 270.5mm*165mm*39mm | |
Functions | Diagnosis | √ | x |
OBDⅡ | √ | √ | |
Car IMMO | √ | √ | |
MOTO IMMO | √ | √ | |
HD IMMO | √ | √ | |
Marine IMMO | x | √ | |
E-Car IMMO | x | √ | |
RFID | x | √ | |
Make key | x | √ | |
Unlock Smart key | x | √ | |
Renew key | √ | √ | |
Read/Write EEPROM MCU | √ | √ | |
ECU advanced(Includes ECU unlock) | x | √ | |
Oil/Service reset | √ | √ | |
Other service function | √ | x | |
Remote test | x | √ | |
ECU flasher IMMO(IMMO OFF、ISN、IMMODATA) | x | √ | |
ECU flasher(Clone) | √ Limited supported models, different with DC706 and G3 |
Paid activation | |
Car/Motorcycle cluster recalibration | √ | Paid activation | |
Airbag reset | √ | Paid activation | |
Test Platform | x | Paid activation |
X300 Classic G3 Menu:
FAQ For X300 Classic G3
How to establish vehicle communication with X300 Classic G3?
1)Connect the diagnostic main cable (M001) to the vehicle’s diagnostic socket for power supply and communication.
*Some functions may require additional adapters or accessories. Please refer to the software operating instructions for detailed procedures.
2) Ready to diagnose and service the vehicle.
How to connect X300 Classic G3 Key Programmer and vehicle?
Depending on the different vehicle configurations, the methods for connecting the intelligent diagnostic equipment and the vehicle diagnostic socket are divided into the following two types:
1.Connecting to OBD II Vehicle
Connecting to an OBD II vehicle only requires the use of the test main cable, no other connectors are required.
Connection method:
1)Connect the male connector of the main diagnostic cable to the smart scanner and tighten the captive screw.
2)Attach the 16-pin connector of the main test cable to the vehicle diagnostic socket, and for the location of the socket, you can refer to the help data in the diagnostic software.
2.Connecting to Non-OBD II Vehicle
Connecting to a non-OBD II vehicle, you’ll need to use a combination of the test mainline and a vehicle-specific adapter. There are two possible connection scenarios for non-OBD II vehicles:
1)The diagnostic interface provides both communication and power.
2)The diagnostic interface can only communicate and requires connection to the power adapter of the intelligent diagnostic scanner or the vehicle battery to obtain power (preferred).
Connection method:
1)Attach the male connector of the main diagnostic cable to the smart scanner, and secure it by tightening the captive screw.
2)Find the vehicle-specific diagnostic connector and link its 16-pin female connector to the male connector of the main test cable.
3)Connect the combined dedicated diagnostic connector to the vehicle’s diagnostic socket.
How to diagnose vehicle with OBDSTAR X300 Classic G3 Key Programmer?
Main steps:
Connect the diagnostic scanner to the vehicle via the test main line >> Register (see Personal
Center section for details)>> Log in (see Personal Center section for details)>> Download/Upgrade diagnostic software >> Select functions and models>> Execute the diagnosis >> Complete diagnostics and exit.
Kindly notice:
Before exiting or closing the diagnostic application program, it’s essential to exit the diagnostic operation interface and terminate all communication between the OBDSTAR G3 Key Programmer and the vehicle.
Interrupting communication can potentially damage the vehicle’s ECU. Therefore, ensure that the test main cable remains well connected to both the smart device and the vehicle throughout the diagnostic communication process.
Additionally, make sure to exit all diagnostic communication before disconnecting the diagnosis main line or turning off the device.
How to solve X300 Classic G3 communicate failure?
If the OBDSTAR intelligent diagnostic tool fails to establish normal communication, the screen will display a prompt message indicating a communication failure, along with corresponding instructions in the relevant section. Possible reasons for this issue include:
1) The ignition is not turned on.
2) The main line is not well connected.
3) Faulty vehicle, data cable, or connector wiring.
4) The battery is exhausted.
5) The vehicle is not equipped with the selected system.
Follow the above reasons to perform the related operations.
Standard package:
1pc x M001 main cable
1pc x charger
1pc x MP001 all-in-one programmer
1pc x W004 read/write soldering wire
1pc x W005 read/write soldering wire
1pc x W006 clock frequency wire
1pc x C4-01 multi-function data read/write board
1pc x C4-02 eight-pin chip(IC) soldering board
1pc x BENCH-A V3 for ECM and TCM cloning functions
1pc x P004 adapter
1pc x BENCH-B V2 ECU Cloning BENCH harness
Free Gift Kits
A1
1pc x KeySlim + USB to Type-C Cable
A2
1pc x M034 Harley-4+6
1pc x M037 Ducati-4
1pc x M040 BMW-10
1pc x M041 OBD-6
1pc x M042 INDIAN/VICTORY-8
1pc x M043 BRP-6
1pc x M053 HONDA IMMO
1pc x M054 SUZUKI/YAMAHA
Free gift kits (get both)
OBDSTAR has launched the new tool – OBDSTAR X300 Classic G3 key programmer.
What is the difference between OBDSTAR X300 Classic G3 (aka Key Master G3) and OBDSTAR X300 DP plus (key master dp plus) key programmer?
Check the table comparison below:
Item | OBDSTAR X300 Classic G3
(Key Master G3)
|
OBDSTAR X300 DP Plus
(Key Maser DP Plus) |
Operating system | Android 11 | Android 5.1.1 |
OTA | Yes | No |
Screen recording | Yes | – |
Wireless screen casting | Yes | – |
CPU | Dual-core Cortex-A72 + Quad-core Cortex- A53 | Exynos4418 qual core ARM cortex A9 |
Battery | 9000mAh | 3700mAh |
Storage capacity | 4G+64GB | 1G+32GB |
LCD | 8.0 inch fully laminated sunlight readable screen | 8.0 inch |
Camera | 800w pixels rear camera, auto focus | 500w pixels rear camera |
Bluetooth | Bluetooth 5.0 | – |
External interfaces | RJ-45 | – |
HDMI | – | |
Type-A, Type C | Type-A, Type C | |
WiFi | Dual-brand 2.4G.5GHZ | 2.4G |
VCI | STM32H723 | STM32F407 |
CAN FD built-in | Require CAN FD adapter | |
DoIP built-in | x | |
Fault tolerant CAN built-in | x | |
All other common protocol types | All other common protocol types | |
RFID | Built-in | Require P001 |
Remote test | Built-in | Require RT100 |
Renault converter | Built-in | Require Renault converter |
Keysim | Comes with Key SIMas free gift | Purchase separately |
MP001 | Comes with MP001 in default | Purchase separately |
P004 | Comes with P004 in default | Purchase separately |
Car Immobilizer | Yes | Yes |
Commercial Vehicles Immobilizer | Yes | No |
Electric car Immobilizer | Yes | No |
Motorcycle Immobilizer | Yes | Part of |
Marine (jet-ski) Immobilizer | Yes | No |
Unlock ECU | Yes, Unlock ECU for ALFA ROMEO, FIAT, CHRYSLER, DODGE, JEEP and others | No |
ECU Flasher | Yes, for some brands | Yes, for some brands |
ECU Cloning (DC706 function) | Optional license | No |
Odometer correction | Optional license | Yes, some |
Airbag reset | Optional license | Optional license |
Test platform feature | Optional license | No |
Update | 2 years free update | 2 years free update |
In Sum:
X300 Classic G3 has built-in CAN FD, DoIP, RFID and Renault converters. Don’t need to purchase extra CAN FD, RFID, Renault converters.
The new X300 Classic G3 comes as an immobilizer tool. You can add mileage correction, airbag reset, ECU cloning (DC706 functions) and test platform license to the device. Turn the device into a all-in-one tool.
X300 Classic G3 has a new system, larger storage, bigger battery, BT 5.0 and more advanced hardware configuration.
X300 Classic G3 is mainly targeted at automotive electronics repairers or professional locksmiths, so it does not include the diagnostic and maintenance functions of X300 DP PLUS (except for Manual Service Lamp Reset), but it adds a lot of new special functions.