A:Here’s a small tip to guide you quickly check vehicle mileage on Xhorse VVDI Key Tool Max Pro/ VVDI Key Tool Max programmer. You’ll need to have a working key at hand.

Put the working key into Key Tool Max slot.
Transponder clone >> Read transponder
Here to check key information including key type, specific chip, key ID, key status, cloneable or not, encrypte mode, code mode, brand, chip type, programming status, frequency, kilometers(KM) and key number.

Slide down the screen to find KM, It shows 612754km.
That’s the vehicle mileage.

* It should be noted that the function does not apply to all cars.

A:We are Xhorse Official authorized dealer, 100% original

A:Please reset factory data on VVDI Key Tool Max Pro and reinstall Xhorse APP and other applications.
Path: Settings>> backup & input>> factory data reset

A:Solution:
Cancel the update, connect to a more powerful network, update again.
Reboot and connect to another server.
If still failed, clear cashe, or do factory reset device and check again.

A:Solution:
Do a factory reset and try again.

A:Answer:
OEM one works.
Autel MX-TPMS sensor was tested working, but better use xhorse one.
Xhorse will soon release their own X-TPMS sensor.

A:Here is the Solution:
1.Test main power supply and chargers with other devices
Ensure cables are normal.
2.Replace the diode
Ask for a diode replacement or send Key Tool Max Pro back.

A:Reason:
This remote control requires XM28/XM38 Toyota Key, while the key on the picture is XM38 Smart Key.
Solution:
Generate this remote control using XM38 Toyota.

A:Here is the Solution:
Change button setting by
Selecting
Special Function>>VVDI remote function>>Toyota smart key setting
*Smart key customization is designed for NXP-smart Key

A:1.Click “More” to collect points
2.Identify Remote
Check if other 5 remotes are Wire Keys, because there is a server issue about points of wire key, and points will be returned this week.
Path: Special function>>VVDI remote function>>Detect remote
Hope this could help!

A:Firstly make sure the software is the latest version
Then Update firmware again.

A:No, key tool max pro cannot make remote simulation. Only key tool max will do.

A:key tool max pro will release this function in the feature

A:yes, it will

A:Yes, you can.

A:Yes, it can.

A:Answer:
1.The function is only available on the key tool max pro.
2. It is for mileage repair.
3. It supports BMW M35080 (E series) and 35160/35128 (F series) repair km by eeprom only.

Function:
Mileage Repair:
1. M35080 (E series)
1).The function can be used to repair mileage by eeprom data.
2).Write new eeprom back to the cluster
1. 35160/35128 (F series)
1).The function can be used to repair mileage by eeprom data.
2).Write new eeprom back to the cluster

A:VVDI Mini Key Tool: No
VVDI Key Tool Plus: No
VVDI Key Tool Max: Yes
VVDI Key Tool Max Pro: No

Left: key tool max pro
Right: key tool max

A:XT15 PCF7935 chip can only be used to copy transponder. It cannot be used to generate or convert chip.

A:Solution:
Just program into car as most Kia and Hyundai don’t need pin to program in.
Cloning only works for some garage openers without rolling code.
Better not clone remotes! Produce one and code to vehicle.