Mercedes Citan 2016, add key successfully with Autel IM508 & XHORSE DOLPHIN II.
Menu path: Renault > Manual Selection > Kangoo > 2012 +
It read pin in seconds and programmed 2 x keys/remotes in 5mins
Good easy job.
Used battery maintainer as directed by IM508 to keep voltage above 13.0v

---

I was able to program a key using an Autel IM508 along with an APB112 smart key simulator without replacing any parts. I now have a working key which should allow me to use other functions on the IM508 like removing the old keys.

The process is relatively easy. Using manual selection, pick your manufacturer, model, and year range from the menu. Find the Generate Analog Key option in the Immobilizer section and follow the on-screen steps; as long as it let’s you save the EEPROM data you should be good to proceed. Once that is done, it should direct you to connect the APB112 where it will create a simulated key. If that goes well, you can then use the Add Key prompt to create a new key (do not disconnect the APB112 during that process).

For reference, my vehicle is a 2020 Subaru Outback (NA) with the following part numbers:

SMT: 88801AN000
ESCL: 83126AN00B

Great Autel MaxiIM IM508S and service from seller. Great bang for your buck in regards to IM508S. Looking to get another for my business

I love all the accessories it came with and how easy it is to use. I run a car dealership and that scanner has been a god send for our Service department. I definitely recommend this to anyone with a shop

Autel MaxiIM IM508S Key Programming Tool can add 2023 Subaru Crosstrek blade key by OBD successfully. Easy done in 5 minutes.

Remote Learning

Connect Autel IM508S to OBD.

IMMO >> Scan VIN >> System Selection >> Remote system >> Remote system(CAN)- Type 1 >> Remote control learning

Turn the ignition off and remove the key.

Registered number = 3

Press the LOCK button of the key to be registered then press the UNLOCK button of the key to register remote control(Please register all remote control in 30s).

If all remote control have been registered, press “OK” to continue.

Learning successful.


Key Adding

Immo status scan >> Turn on the ignition >> Add key >> Start

This function is for adding key.

Working key is need for this function, press “Yes” to continue.

Insert the learnt key and turn on the ignition.

Please use the keys that are not learnt to learn.

Insert the key and turn on the ignition.

The number of registered keys: 4

Done.

Autel IM508S Generate 2017-2020 BMW 8 Series Smart Key succes. 
 

---

Works great
Success
2015 Toyota Corolla sport
***(H) key*** all keys lost
im508
Connect manual selection
Immo box reset 
***connect to wifi***
Key dance multiple on and offs
Then toggle key on and off 6 times
Done

Had already used it in the past few days to solve adding keys, adding remote controls, all key lost problems on Toyota, Nissan and counting... Great product! Excellent Professional Car Key Programmer!

Very good seller. You can buy safely.

---

Very good. I love the Autel MaxiIM IM508S

Autel MaxiIM IM508S Key Programming Tool can add 2023 Subaru Crosstrek blade key by OBD successfully. Easy done in 5 minutes.

Remote Learning
Connect Autel IM508S to OBD.

IMMO >> Scan VIN >> System Selection >> Remote system >> Remote system(CAN)- Type 1 >> Remote control learning

Turn the ignition off and remove the key.

Registered number = 3

Press the LOCK button of the key to be registered then press the UNLOCK button of the key to register remote control(Please register all remote control in 30s).

If all remote control have been registered, press “OK” to continue.

Learning successful.

Key Adding

Immo status scan >> Turn on the ignition >> Add key >> Start

This function is for adding key.

Working key is need for this function, press “Yes” to continue.

Insert the learnt key and turn on the ignition.

Please use the keys that are not learnt to learn.

Insert the key and turn on the ignition.

The number of registered keys: 4

Done.
 

---

Great seller! I recommend it. Sent quickly, put many gifts inside.

Autel MaxiIM IM508S Key Programming Tool can support to add 2019 Mazda CX-9 key by OBD successfully.

Connect Autel IM508S to OBD, after scanning VIN, go to

Immo status scan >> Erase codes if having >> Add key(guided) >> Start

Note: This function will not erase existing keys. Press “Yes”.

Turn the ignition on.

System configuration in progress. Please wait for 7 minutes, then the vehicle horn can be heard…

Learned key: 2, press “OK”.
Depress the brake for A/T vehicle and clutch for M/T vehicle.
Put the smart key mark close to the START button.
Current number of keys: 3

Learning successful.

Press “No” to complete.

 

The engine can be started only when the following steps are taken:

Turn the ignition off.
Depress the brake pedal, put the head of one learned key close to the START button, start the engine for 3s and then turn the ignition off. Repeat this procedure for each learned key.
 

Test the new key, it does work perfectly.

Done.

---

Everything was delivered as described and fast, happy with the tool and service

I advise everyone, not the first purchase from this seller

Autel IM508s Skoda - Fabia 2016 add key 3min job. IM508 The original key was mqb but without remote , programed one remote mqb without surprises.

The tool is very good, and I love the way it operates

I have used several products manufactured by Autel over the years and have yet to be disappointed. This is no exception. The Autel IM508 pro is a powerful and versatile automotive key programming tool! It combines diagnostic features and more than 20 useful maintenance service functions, this integration (diagnostic and key programming) makes it a valuable tool to have for any locksmith, technician, or anyone that needs to program vehicle keys. Combining the IM508 with the XP400 pro gives you an even better value. (It's almost like getting the IM608 for have the price.) Out of the box it comes with 2 years of updates included, after that the updates are running about $350 a year. The tool will not become useless if you don't do the update it just will not have the most up to date information and will not be able to program the newer model year, but compared to the competitors the yearly renewal cost is extremely reasonable (I highly recommend keeping the tool up to date). I have pictured everything you get in the box and a few pictures of the immo screens. The construction of the tablet will allow for years of hard use and the case the tool comes in can take a beating too. If you want to add to your arsenal of quality tools or only have the budget to get only one then this is the one I would get.

---

KIND OF HARD TO WORK ON ANY IMMOBILISER ISSUE ON MODERN CARS WITHUT ONE OF THESE, THIS TOOL SAVES THE DAY QUITE OFTEN