Original Autel MaxiIM IM608

Multi-Di@g Access J2534 Pass-Thru OBD2 Device technical Support


multi-di@g-access-j2534-vci-serial-number-setting.pdf  (725K)

Here is the J2534 technical support., including Multi-Di@g Access J2534 language available, Multi-Di@g Access J2534 VCI serial number setting; Multi-Di@g Access J2534 setup note. Hope they can help you solve your using problem.

Please check the attachment: Multi Di@g Access J2534 VCI serial number.pdf.

Multi Di@g Access J2534 VCI serial number

During installation, when Multi-Di@g configuration window appears, you should set
Communication interface to USB and set VCI serial number to A070026:





After installation, MultiDiag shows message asking to get activation code:


Press green button and you will see window asking for code. Please contact us with the code (18-...)
we will send you back the correct password to enter:



During the diagnostic with the device connected, warning about 0 days left will appear. Just check
the mark “Do not display this message again” and continue the work, everything will be working
ok.





Multi-Di@g Access J2534 language available:










Notes:

1. Be sure to disable/uninstall anti-virus software

Please note, anti-virus software can flag up Mb star c3 software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our Mb star c3 software is completely safe and virus free and all other virus scanners confirm this.If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
3.Be sure that the default code is 070026.
If the default code is not 070026, after you activate the J2534, the software may present like this: interface not registered please launch multi-diag configuration.