Autel MaxiCOM MK808BT PRO scanner is the Upgraded Version of Autel MK808BT, Adds 7 Hot Special Functions: Transport Mode, HV Battery, ACC, A/C, Rain/Light Sensor, EGR, and FRM Reset, it also can quickly read and clear DTCs for all available modules of the majority of the makes and models on the market
Autel MaxiCOM MK808BT PRO (Autel MK808Z-BT) Full System Diagnostic Tool
Featuring the powerful Rockchip RK3566 processor, and a 7.0 inch LCD capacitive touchscreen, based on the Android multitasking operating system, and combined with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, the MaxiCOM MK808Z-BT is your ideal auto diagnostic and service tool. MK808Z-BT provides you with superior special functions, including Oil Reset, EPB(Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery Management System), and DPF (Diesel Particulate Filter).
1. Globel Version, No Blocking Problem
2. Upgraded Version of Autel MK808BT
3. With One Year Free Update Online
. After One Year, MK808BT PRO/ MK808Z-BT Subscription Cost 130USD/ Year
4. Adds 7 Hot Special Functions:
Transport Mode, HV Battery, ACC, A/C, Rain/Light Sensor, EGR, and FRM Reset.
5. Adds Basic Functions and Special Functions for Models with 4 Types of Chassis Including G22 and G82.
6. Multi-Language Supported:
English, Polish, Korea, German, Italian, Russian, Dutch, Portuguese, Spanish, Swedish, French
7. Compatible with Autel MV108/ MV105 Inspection Camera:
This is a very pratical and useful functions, which allows you to have a futher wear situation check on your car engine/transmission,etc internal structure, to avoid further damage or avoid potential dangerous driving.
8. Battery Test work with MaxiBAS BT506:
* MK808BT PRO can work with Autel BT506 battery tester to perform professional cranking/ charging system test and In-Vehicle & Out-of Vehicle Battery Test, and with over 95% accuracy result with advanced adaptive condutive technology, which is far more accurate than the 50% of market avreage accuracy.
* Autel automotive battery test tool BT506 can test all 6V and 12V 100-2000CCA batteries including the most regular Flooded, AGM, AGM Spiral, EFB and GEL batteries, and compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA standards.
NEW! Support active test and complete special functions,
NEW! Compatible with Videoscope and MaxiBAS BT506 to perform Battery Analysis,
Extraordinarily powerful Rockchip RK3566 processor,
7-inch LCD capacitive touchscreen with 1024 x 600 resolution display,
Internal reliable 64GB On-board Memory for better performance,
Unique ergonomic design with rubberized outer protection and a rugged internal housing,
Android 11 Operating System for fast boot-up and multitasking,
Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes,
Complete capabilities for codes, live data, electronic control unit (ECU) information, and vehicle control systems, etc.
Data Manager saves customer and vehicle records, scanner data and technician notes for future review,
Read/clear codes functions,
Display live data in text, graph & analog for easy data review,
Auto VIN technology can automatically identify the vehicle’s make, model, and year information,
Reset Steering Angle Sensor (SAS),
Support forced DPF regeneration.
Broad Vehicle Coverage:
99% of Vehicles Coverage: No matter whether the vehicle you are going to diagnose is come from the US, Europe, Asia, or Australia, the diagnostic tool Autel MK808 can fulfill your demands. If you worry that the car models update from one year to another but the diagnostic tool cannot scan the latest model, take it easy, the one-click update feature is here to make the scanner always compatible with the latest model. This list is still growing as the industry
The Autel MaxiCOM MK808 PRO works well with: Acura, Audi, Benz, Bentley, BMW, Bugatti, Chevrolet, Chrysler, Corolla Gm, Holden, Ford, Honda, Hyundai, Infiniti, Kia, Land Rover, Isuzu, Jaguar, Lexus, Maybach, Mitsubishi, Nissan, Mazda, Mini, Opel, Porsche, Saab, Scion, Smart, Seat, Skoda, Sprinter, Subaru, Vauxhall, Volvo, Suzuki, Toyota, and Volkswagen vehicles, etc.
1. OE-Level Full Systems Diagnostics:
MK808BT PRO professional scan tool can access wirelessly ALL available vehicle modules including but not limited to PCM, ECM, TCM, CTM, EPS, PDM, BCM, TPM,
SCCM, RADIO and etc. With complete capabilities for codes, it can read and clear codes on all vehicle systems and subsystems and is capable of showing full
live data stream of multiple sensors in graph & text and turn off warning lights.
1) Read Codes: Retrieve detailed information of DTC records to locate problems.
2) Clear Codes: Erase DTC records and other data after reading codes and making appropriate repairs, used to turn off some annoying warnings light like check engine light(CEL) or reset ECU data after repair and replacement.
3) Live Date: view live data and parameters of multiple sensors in text, graph & analog, so you can monitor the working conditions of electronic components in real time to facilitate troubleshooting.
4) ECU information: Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
5) Freeze frame Data: Freeze error codes at the moment occurs, and you can analyze the error code caused. READ CODES: retrieve detailed information of DTC records to locate problems.
2. Battery Test Function
Battery Test function is a battery and electrical system analysis function that uses adaptive conductance, an advanced battery analysis method to produce a more accurate examination of the battery's cold cranking ability and reserve capacity, which is vital to determining a battery's true health. It enables technicians to view the health status of the vehicle's battery and electrical system. Together with the BT506, this application can complete battery & starting and charging system tests and display the test results.
Battery Test function includes In Vehicle Test and Out of Vehicle Test Function.
* In-vehicle Test is used for testing batteries that are installed in a vehicle. An in-vehicle test includes battery test, starter test, and generator test.
These tests help determine the health status of the battery, the starter, and the generator, respectively.
* Out-vehicle Test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.
Note: You need MaxiBAS BT506 to perform the battery test function (Need purchasing separately)
3. OBDII Full Functions
This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related. The OBD direct access option is also used for testing OBD II/EOBD compliant vehicles that are not included in the Diagnostics database.
1) Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs).
2) Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3) I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
4) Live Data: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
5) View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
6) O2 Sensor Monitor: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle' s on-board computer.
7) On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
8) Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
9) Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
4. Reset Service Functions:
MK808BT PRO automotive diagnostic tool performs 36+ service functions that every mechanic wants for various scheduled service and maintenance performances including:
Oil Reset: Turn off the oil light, and reset the service mileage.
EPB Reset: Reset the brake pads after replacement.
DPF Regeneration: Clear the blockage in the DPF filter, to meet emission standards.
ABS Bleed: Cycling the ABS system to bleed the air out of the ABS system before traditional bleeding.
Injector Coding: Coding the new injector after replacement.
BMS: Reset a battery after you have replaced it.
TPMS: Read TPMS data and point out issues related if there are any.
And Throttle Adaption, Airbag Reset, SAS Calibration, Suspension Calibration, Gear Learning, Sunroof Initialization, Seats Calibration, Language Change,
Headlight Matching, A/F Setting, WIN DR Roof, Odometer, CHG Tire Size, Cylinder, Turbocharging, Limit, Trans Adaption, Power Balance, Component Matching,
5. 4 Methods for Vehicle Identification:
1. Auto VIN Scan: The MaxiCOM diagnostic system features the latest VIN-based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
2. Manual VIN Input: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
3. Automatic Selection: The Auto VIN Scan can be selected after selecting the test vehicle manufacturer
4. Manual Selection: When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.
||RAM 4G+ROM 64G
||7-inch LCD capacitive touchscreen with 1024x600 resolution
||Mini USB 2.0
Wi-Fi(2.4 & 5GHz)
HDMI Type A
Micro SD card slot(supports up to 64GB)
||Light sensor for brightness auto changing
|Power adn Battery
||3.7 V/5000 mAh lithium-polymer battery
Charges via 5 VDC power supply
|Tested Battery Life
||Around 7 hours of continuous use
|Battery Charging Input
||600 mA(LCD on with default brightness,Wi-Fi on)@3.7 V
||0 to 55°C(32 to 131°F)
||-20 to 60°C (-4 to 140°F)
||ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM,
ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN),
SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
Extraordinarily powerful Rockchip RK3566 processor,
7-inch LCD capacitive touchscreen with 1024 x 600 resolution display
Internal reliable 64 GB On-board Memory for better performance
Unique ergonomic design with rubberized outer protection and a rugged internal housing
Android 11 Operating System for fast boot-up and multitasking
1 x MK808BT PRO/ MK808Z-BT Tablet
1 x USB External Power Adapter_test
1 x USB Cable (for charging)
1 x USB Cable (for test)
1 x MaxiVCI Mini
1 x Quick Reference Guide
OBD2EShop OBDII tool online supplier 1)DHL Shipping and Other Express Service:
Shipment Option and Delivery Time In OBD2eshop 1. Shipment from Shenzhen/ Hongkong warehouse
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
2. UK, US, EU Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
After-sale service:We can offer you lifetime customer service and tech support.
- Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement. For any question, please contact us at:
- Accepting bulk purchases, We can Offer you wholesale price.
- OBD2EShop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.