Ship From US/UK/EU Autel MaxiIM KM100 KM100E Auto Key IMMO in Open OBD Mode Function Immobilizer Programming Tool Supporting 8 Key Series And 37 Models

This car has a key but the remote stopped working when I inspected the remote. The back was so far damaged I couldn’t repair it.

turn the key to the unlocked position watch that passenger door lock
connect PLC200 dongle with vehicle via OBD and pair PLC200 with KM100 via Bluetooth

I gonna do the remote desktop and i will go and log on to that

hit the teamviewer id to allow access and now we have control

even though we have a key i want to see if it does all keys are lost.
we are going to do it as all keys lost
Go to IMMO function- Toyota

Auto scan VIN very fast

Decode VIN and check vehicle information, it is a Corolla 2020

see it is 2020

Immo status scan

Autel KM100 says one DTC in the immobilizer
we go head and do the quick erase up on the top right there
You don’t have DTCs when you are programming key on this car.
Go into Immo Learning- Immobilizer – Immobilizer Reset (all keys lost)

The driver’s door is open

Copy and paste rolling code here

go ahead and hit OK

it’s gonna take 16 minutes to reset immobilizer so we’re going to hit ok turn it off,  remove the key and turn it back on

it should do the 16 minute countdown

so pretty cool.

Go back let’s do the add key

Turn ignition on with a master key

we input the password

switching off remove the key

Insert the smae key and leave ignition off

Leave the ignition off

cycle the key on and off eight times
car starts ok
this thing works for that

let’s go and do the remote side
hold Lock and unlock

let go and hit unlock

there you go

we’re clearing the remotes

and we’re programming the new one at the same time

That’s it pretty quick still 16 minutes plus remote program, nothing different

just for $500 you can do this car and a bunch more.

You can use it instead of im508 im608 on many vehicles to program keys as it’s simple and easy to pack/unpack and compact, it’s convenient.