IMMO & Key Programming
1. Videoscope (Mainly applied to check unseen parts of engine, fuel tank, braking system, etc.)
2. KC501 (For Benz infrared key programming,For VW 4th ,,5th immo, For Eeprom ,For Chips programmer)
3.KC100 (For VW 4th and 5th immo )
4.KS01(For toyota all key lost programmer )
5.M821 For Bnez All key lost
6.M822 For Toyota 8A Key
7.AnyToyo SK1 For Toyota 8A/4A Smart Key Programming With Bench-free Pincode-free Auto Key Coding
2. OE-Level Full System Diagnostics
XTOOL D9pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.
Read all DTC types for full system, support read/clean DTCs, view live data, freeze frame, ECU info and perform bi-directional control
Read Live Data : Such as Engine coolant temperature, Short term fuel trims, Long term fuel trims, RPMs, lntake air temperature, Ox sensors and etc.
View Freeze Frame: capture the data when the electronic control unit detected a malfunction. For example, when an engine misfire is detected, a snapshot of the current sensor values is captured.
Include : ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System ,Oil Service System , SRS System ,DPF System ,Air Conditioning System,Transmission System, ect all Systems .
3. ECU Programmer(Coding)
Used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
After we replace control units, bad actuators, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Almost all systems that include engine, fuel, injector, gear shift, ABS, airbag system, and so on can be coded with this scanner. Before the coding, please read and record the original module’s information.
Recode Changed Modules/Optimize Vehicle Performance/Re-Flash/Hidden Functions/Renew ECUs Coordination/Reprogram/Adaptive Data/Improve Fuel Efficiency/Reduce Power Loss/Improve the Durability of Mechanical Parts
Support the Online ECU Programmer For Benz/BMW and VW(no need with online account )and Offline ECU Programmer for Ford /Mazda
Can Programming new ECUs(PCM, ECM)
Module Replacement: Match the adaptive data to new replaced module
Refresh Hidden Features: Unlock hidden functions pre-programmed or change default settings, works for Toyota, VW, BMW, etc.
It performs flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reprogram the adaptive data for certain components after repairs or replacements.
4. Bi-Directional Control/Active Tests+ECU Coding
XTOOL D9S Pro is a bi-directional scan tool with ECU codding ,allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs.
5. Newest Doip and CAN FD Functions
It can works for the Doip protocol and CAN FD .CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)
Access new communication protocols of CANFD (cover MY2020+ GM models), and DOIP (compatible For BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes)
6. Module topology mapping function
Intelligent diagnostic tool has a module topology that scans all available automotive modules and displays color-coded diagnostic status in a tree diagram, allowing in-depth analysis of faults directly on the tree diagram. Revealing the underlying communication structure between modules. Help you improve workshop maintenance efficiency
Note: Topology Map compatibility with GM, CHRYSLER, JEEP, DODGE, FORD, TOYOTA, NISSAN, HONDA, BMW, BENZ, HYUNDAI, MAZDA(MORE COMING SOON). DO NOT available for All Vehicle Makes. Please come to us for compatibility check.
7. D9S Pro 42+ Reset Functions
XTOOL D9pro With car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc.
Note: Service functions does not work on all vehicles
ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.
ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.
IMMO / Key Programming: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key.
Oil Reset: Reset the new calculation of Engine, Oil Life System for an accurate reading of the next oil change.
EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
BMS Match: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.
Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.
Also including: TPMS Reset, Air Suspension, Gear Learning(Crankshaft Relearn),
Gearbox(Transmission) Match, Headlight Adjustment, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Language Change, Transmission Service Fast Relearn, Fuel Injector Balance, Crankshaft Sensors Relearn, Idle Learn, Zero- Point Calibration, Fuel Alcohol Composition Reset, Actuator Calibration Test, WCS Reset, VIN Registration(Write), Injector Balance Rate Programming, etc are all available.
8. D9S Pro Other Function
✔️ Bluetooth + Cables + Wifi
Support BT , WiFi, and USB three connection methods, mae it easier for you to use
✔️ Live Data Stream Analysis in Graph
Displays live data in text, graph for easy data review and analysis, record and playbacks live data to pinpoint troubles of sensors and components.\
✔️ AUTO VIN
Automatically identify your car model, year. Can quickly detect the car's internal system (if your car is not recognized, please enter your VIN number directly, D9pro will automatically record your VIN)\
✔️ VAG Guided Functions
With VAG Guide Functions, D9pro can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions on For VW, Audi, Skoda, etc.
✔️ Print Diagnostic Report
You can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card
✔️. Support 85+ Brands, 10000+ Cars Coverage
It car diagnostic scanner can work on more than 85+ US domestic, European, and Asian makes and models, more than 10000 cars, the extensive vehicle coverage can provide you with almost every diagnostic option a mechanic could need.
XTOOL D9S Pro Vehicle Coverage
For American cars
For BUICK, For CADILLAC, For CHEVROLET, For CHRYSLER, For DODGE, For FIAT(BRAZIL), For FORD, For FORD(AUSTRALIA), For GM
For JEEP, For LINCOLI, For GM(BRAZIL)
For European car
For ABARTH, For ALFA ROMEO, For AUDI, For BENTLEY, For BMW, For BUGATTI,For CITROEN , For DACIA, For DR, For EUROFORD, For FERRARI, For FIAT, For GAZ, For OPEL(SOUTHAFRICA), For JAGUAR, For LAMBORGHINI, For LANCIA, For LANDROVE, For MASERATI, For MAYBACH, For MERCEDES, For MINI, For OPEL, For PEUGEOT, For PORSCHE, For RENAULT, For ROLLSROYCE, For ROVER, For SAAB, For SEAT, For SKODA, For SMART, For SPRINTER, For VAUXHALL, For VAZ, For VOLVO, For VW, For BORGWARD, For ASTON MARTINA,
For Asian car
For ACURA, For DAEWOO, For DAIHATSU, For HM, For HOLDEN(AUSTRALIA), For HONDA, For HYUNDAI, For IKCO, For INFINITI, For ISUZU, For KIA, For LEXUS, For LUXGEN, For MAHINDRA, For MAHINDRA(INDIAN), For MARUTI,For MAZDA, For MITSUBISHI, For MVM, For NISSAN, For GTR(NISSAN, For PERODUA, For PERODUA(MALAYSIA,
For PROTON, For PROTON(MALAYSIA, For SAMSUNG, For SAIPA,
For SSANGYONG, For SUBARU, For SUZUKI, For TLISUZU, For TOYOTA, For UNITED PAKISTAN, For VINFAST
For Chinese car
For BRILLIANC, For BYD, For CHANGAN, CHANGAN-FORD, , For CHANGHE, For CHBUICK, For CHCADILLAC, For CHCHEVRO-KET, For CHERY, For CHSUZUKI, For DFCIROEN, For HONDA(DF), For DFNISSAN, For DFEUGEOT, For ECUAID, For FAW(TIANJIN, For FOTON, For GOLDEN(XIAMEN, For GONOW, For MITSUBISHI(GAC, For GREAT WALL, For HONDA(GAC, For HAFEI, For HAIMA, For HCBMW, For JAC, For JIANGHUAI, For JMC, For JOYLONG, For LIFAN,
For LYNKCO, For MG(SAIC, For NJFIAT, For QOROS, For MAXUS,
For SGM, For TOYOTA(CHINA, For VENUCIA, For WULING, For XINKAI,
For YQMAZDA, For ZHONGGSHUN, For ZHONGXING, For ZOTYE, For SOUEAST, For ROEWE(SAIC), For JIQING(FAW), For HUANGHAI, For LANDWIND, For EXEEDTY, For NISSAN(ZHENGZHOU), For DFPV,
For JETOR, For DFFX, For CHERY EV
One Click Update Online & Mutil Languages Support
XTOOL D9 PRO supports 3 years of free updates, you can get the latest version of the software, enjoy the latest technology and cover more new models.
After the 3-year free update service expires, you can use it normally
If you want to get the latest software, you can purchase the update service. Annual updates after 3 years are $399.
Item | XTOOL D9 Pro | XTOOL D9S Pro |
Operation System | Quad core 1.8Ghz | Quad core 1.8Ghz |
Memory | 2+128GB | 4+128GB |
Screen Size | 9.7inch(1024*768) | 9.7inch(1024*768) |
Operation Method | Touch Screen | Touch Screen |
Connection Method | Bluetooth/Cable | WIFI/Cable |
Battery | 10000mAh | 10000mAh |
Power Charge | Adapter | USB |
Update | Online | Online |
Free Update | 3Y | 3Y |
CAN FD | Support | Support |
DOIP | Support | Support |
USB Port | 3.0 | 3.0 |
WIFI | 2.5G/5G | 2.5G/5G |
Camera/Videoscope | Support | Support |
Frame | Support | Support |
Navigation Bar | Stable | Unstable |