2Ys Free Update Online 2023 Launch X431 PAD VII Elite Pad 7 Diagnostic Tool with ADAS Calibration, Topology Mapping, 50 Service Functions, TPMS, Online Programming

Product Description

• Topology Mapping 
  8 Extended Modules
  With 50 services functions
• Optional ADAS Calibration Functions (Need to pay)
• Realtime Remote Diagnosis Function via WiFi
• Supports BMW, VW, Audi, Benz online coding till 2023.
• Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.
• Support D-PDU/J2534/RP1210 diagnostic standard, CAN/CAN FD/DOIP protocol.
• The new Smartlink C VCI powers you a new diagnostic level without the limitation of diagnostic tool
• Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP.
• Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)
• Larger memory (8GB), smoother operation; strong light readable screen; support for three defenses
• FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions
• Full System Vehicle Coverage for U.S., Asian and European Markets Over 110 Brands, Which is Continually Updated
• Special Functions Supported: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
• Online Programming: BMW, Benz; Offline Programming: VW, Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche

Newly Added Functions:

• NEW! Adds EV diagnostic kit for new new Energy Battery vehicles 
• NEW! Adds "X-431 FIX" function (Need to purchase from Mall)
• Online ECU Programming: Easily reprogram ECU modules on 30+ vehicle brands.
• 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
• Topology Mapping: Visually show you all system relationships and DTC in color topology.
• OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
• Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
• User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.
• How to Activate New Energy Battery Pack to Launch X431 PAD VII/V? Pls Click Here

• Supports Australian Ford and Holden, Brazilian, Indian and Malaysian cars
• Buy now can send free X431 X-PROG3 [Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III] 
• PAD VII Can Support ADAS Calibration, But Clients Need To Buy the ADAS Devices To Make It. Without ADAS Devices, Can Not Do ADAS Calibration by PAD VII Only
• According to function, Launch tool sequence: X431 PAD7> PAD5 >PAD3 >PRO5 >X431 V+> PROS V>PROS MIN
  X431 PAD VII user manual is in device APP
• Multi-Language Supported: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian

Super Hardware Configuration

• [5G WiFi Communication] automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic distance, and anti-interference.
• [Universal Physical Interfaces] include USB Type C, USB Type A, Micro-SD, Micro-SIM slot (LTE version), etc.
• [Patented Dual Diagnostic Modes] work on both local diagnostics & remote diagnostics.
• Core Processor + Android 9.0 OS] enhance the diagnostic speed of the multi-ustomer information, diagnostic data & files, and repair recordings.
• [13.3’ Touchscreen with 1920*1080] gives you a smoother view experientask process.
• [8+256GB Memory] ensures the smooth multi-task operation and keeps all the cce.
• [IP65 + Corner Protectors] more waterproof and more resistant to falls.

Why is the LAUNCH X431 PAD VII scan tool more powerful than another diagnostic tool?

• Saving More Time: The LAUNCH PAD Ⅶ scan tool could quickly and accurately identify problems stored in the car’s onboard memory, greatly lessening time in the garage.
• Spending Less Cost: With the Smartlink C device, LAUNCH X431 PAD Ⅶ can download OEM software to address problems such as the engine, ignition, fuel injection performance, and rpm levels, effectively preventing a small problem from developing into a more serious and more costly fault.
• Serve More Vehicles: Compatible with 30+ worldwide vehicle brands.
• Online programming tool X431PAD VII does not require an expensive online account, just connect to WIFI, saving maintenance costs.
• The smart box adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
• When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which are not cost-effective.

ECU Programming of LAUNCH PADⅦ VS. Other -Covering More Programming

• Online Programming: Mercedes Benz and BMW. Downloading the newer data from the online server and reprogramming it to the ECUs.Updating data and upgrading ECU software version.
• J2534 Programming: Working together with SmartLink VCI (J2534 pass-thru device) to perform J2534 programming.
• Offline Programming: Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche Program adaptive data for certain ECU modules after repair.

Check the DTCs and all systems communication status visually by topology module mapping function



Accurate ADAS Calibration functions

Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. (NOTE: Need to be purchased separately)


Bonus Functions

Pin Detection

This module allows you to detect the voltage of the vehicle OBD II diagnostic socket pins and the supported protocol types to help technicians judge the OBD II diagnostic interface.


A new module ‘MALL’ is now available for all users to expand and upgrade their X-431 PAD VII with more diagnosis software.

Advanced ECU Coding and Online Coding
J2534 ECU + Programming
Flash Hidden Functions
ECU Coding
Guided Functions
AutoAuth for FCA SGW
Anti-Theft IMMO Service



More Advanced Functions:


Special Functions:
Service Lamp Reset
Electronic Throttle
Brake Reset
Immobilizer Reset
Battery Reset
Injector Coding
SAS Reset
TPMS Reset
ABS Bleeding
Gear Learning
DPF Regeneration
Gearbox Reset
Headlamp Reset
Sunroof Initialization
SUS Reset
EGR Adaption
A/F Reset
AdBlue Reset
Nox Sensor Reset
Stop/Start settings
Transport Mode
Coolant Bleed
Windows Calibrations
Seat Calibrations
Tyre Reset
Language Change

Add 6 New Special Functions:
Cluth matching
Turbocharging matching
FRM matching
Gateway module date calibration
ECU reset
Rainfall light sensor



How to Use SmartLink C as J2534 Passthru?

Smart Link C Box
Smartlink C is a new generation intelligent diagnostic box with Linux system independently developed by Launch, which supports multiple communication modes (USB, BT, WIFI) and multiple diagnostic protocols. It can be used alone as a remote diagnosis box for SmartLink remote diagnosis, or as a pass-thru tool to connect with OEM software.

* Support D-PDU / J2534 / RP1210 diagnostic standard, and cover passenger cars and commercial vehicles at the same time
* Support the latest diagnosis protocol of CAN/DOIP / CAN FD
* Support 2.4G/5G dual band
* Support online upgrade

In the SmartLink ecology system, if a technician (SmartLink C) does not have time to puzzle through a touch vehicle problem, he can seek a trusted second opinion or additional expertise on various vehicle issues from remote master technicians or repair shops (SmartLink B). SmartLink B enables the shop owner to greatly increase customer's retention and boost shop revenue by providing the professional technical assistance service.

Download the OEM diagnostic software in Automakers’ Service Webs to your computer. You can reach us to get web sites.
Connect the Smartlink C to your computer with the included USB cable, or via the stable and solid 5G Wi-Fi network.
Connect the Smartlink C to your vehicle’s DLC port with/without the included extended OBDII cable.
Download and install the LAUNCH’s J2534 tool at the LAUNCH official site.
Run the “ J2534 tool ” and there you go.

Smartlink remote diagnosis introduction

SmartLink Remote Diagnostics is a brand new remote diagnostic technology that better links remote assistance demanders with professional technicians through the bridge role of SmartLink remote diagnostic service open platform. Professional technicians can carry out remote diagnostic operations on PCs (with J2534 driver and OEM software installed) to assist in the completion of remote diagnostics after users use SmartLink C connector as a J2534 Pass Thru device and connect it to the Ethernet.


Launch X431 PAD VII Vehicle Coverage:

Passenger Vehicles:

1. Australian:  AUST Holden, AUST Ford
2. Asian: Toyota/ Lexus, Honda/ Acura, Mazda, Subaru, Nissan/ Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti
3. European: Audi, Mercedes/ Maybach, BMW/ MINI/ Rolls Royce, VW/ Bentley/ Bugatti, Opel/ Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault/ Dacia, Fiat/ Romeo/ Abarth/ Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Arston Martin, Porsche, Jaguar
4. USA: USA Ford/ Lincoln, GM/ Buick/ Cadillac/ Chevrolet, Chrysler/ Dodge/ Jeep
5. Chinese: Changcheng (Great Wall), Geely, Qirui_TY(Cherry), Futian, Changan, Changhe, Haifei ….etc.
6. Special: Immobilizer/ Key, Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
7. Others: EOBD, Demo

Heavy-Duty Vehicles (Optional)(Need to Pay Heavy Duty License and Adpater Set):
Nissan (Diesel)
Mitsubishi (Diesel)
USA Ford Diesel, Kenworth
Astra, Benz Heavy Duty,  Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel
Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty
Iveco Heavy Duty, JAC Heavy Duty, Mack , MAN , OBD Heavy Duty, Scania, Shangchai Diesel, Volvo Heavy Duty
WP Diesel, Airbus, Allison Transmission Box, Ashok Rejlander, Bendix ABS, Caterpillar Heavy Duty
Chai Heavy Vehicle, Chaoyang Diesel, Construction Machinery, CREDO Heavy Vechicle, Detroit Engine
Dongfeng Commercial Vehicle, Dongfeng Yufeng, Doosan Engine, Freightliner Heavy Duty Truck
Full Diesel Diagnosis Software, Haldex ABS Heavy Duty, HD_ABS System, HD_GoldenDragon, HD_International
HD_Kinglong, HD_Maxxforce, HD_Tata, HD_Western_Star, Heavy Truck Presentation Software
IRISBUS HD, IRIZAR HD, NEOPLAN HD, Peter HD, Renault HD, SETRA HD, Stannic Bavin, Sterling HD
Sunlong Bus, Sunwin Bus, UD Trucks 2F Nissan Diesel, WABCO ABS, Yang Chai Engine

Powerful special functions:
Component Replacement, Cylinder Compression Test, Injector Cut Out Test, DPF Regeneration
Communicates with ABS & Transmissions from Bendix, Wabco and Allison
Tech to Tech remote communication function

LAUNCH X431 PAD VII PAD7 TABLET SPECIFICATION

Operation System	Android 9.0
CPU	2.0GHz Octa cores
Memory	8GB RAM & 256GB
Display	13.3 inch capacitive screen，1920*1080
Connectivity	Bluetooth/Wi-Fi
Camera(rear)	Front 8mp, Rear 13mp
Interface	DC IN/Micro USB/USB 2.0 Type A/RJ45/HIMI
Power Consumption	≤ 2W
Test Voltage	DC 9～18V
Working Temp	0℃~50℃
Dimensions(W*H*D)	353x236x71(mm)
Smartlink
Display	3.5' touch screen 320*480
Memory	256M
Storage	8GB
Diagnostic Communication	WiFi & BT & USB

Package List:
1x X-431 PAD VIImain unit
1x Smartlink C diagnostic connector
1x Micro USB cable
1x Cigarette lighter cable
1x 5V DC out power adaptor
1x Battery clamps cable
1x OBD II extension cable
1x Non-16pin connector converting cabel
1x Password envelope
1x Non-16pin connectors set

---

 

Shipment Option and Delivery Time In OBD2eshop

 1. Shipment from Shenzhen/ Hongkong warehouse 

 1)DHL Shipping and Other Express Service:

• Take About 5-7 working days
• DHL will be the default delivery method
• To help you clearance we will help declare a lower price on the invoice to help clearance.
• If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
• For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.

 2)Yanwen Express: 

• Take About 7-10 working days, No Tax Problem
• Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
• Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.

 3)Normal Registered Airmail Post way

• Take About 10-16 working days, Sometimes will be 20 days. 
• Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
• Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail. 
• But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL. 

 2. UK, US, EU Warehouse Shipping: 

• Item title marked "Ship from US" 
• Take About 3-5 working days, Free TAX, faster shipping with cheaper price. 
• Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
• We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL

After-sale service:
We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.

 For any question, please contact us at:

• Whatsapp: +8618054815707
• Email: sales@OBD2eShop.com
• Hot line: +8618054815707
• Skype: careucar

• Accepting bulk purchases, We can Offer you wholesale price.
• OBD2EShop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.