Works great!

Came fast and all good as described. Very pleased with the seller communication skills. Recommended seller.Thanks

just tested it on EDC16U31 Skoda Octavia R/W All OK

Awesome CU TCU Clone and Chiptuning Tool to have. It pays for itself

Got my FoxFlash today, very fast shipping. 
Passat 2011, 2.0, edc17cp04 read write successful. Today arrived the tool, first try, all work good. Thanks to Chan Iecutool, trusted seller
Chevrolet Orlando. Read write ok.. Dpf off. Work good on Dcm 3.7 ap
Bmw Edc17cp02 or c06/cp06 read on bench dpf off write chks done the tool
BMW E91 330XD N57 EDC17CP09 on Bench Read, Write (Stage 1, 310 HP 680 NM). Car Start fine (Checksum done with WinOLS)

 

---

I must confirm that FoxFlash is working very good for me. Tested on several units and have no problem at all. Online only, no problem. Got it several days and worked well on : No need to open ECUs EDC16U1 bench full EDC16U34 bench full EDC17C64 vw bench full EDC17C46 vw bench full, then tested OBD flash too with VR also succeeded EDC15C2 Suzuki OBD (Flash only) EASYTRONIC Opel, Ford bench Flash R/W boot

This is an exceptional tool when compared to price and function.

Foxflash will read Cheverolet, GM and Opel Delphi DCM3.7AP MPC55xx ecus.

 

Delphi DCM3.7AP Jtag MPC55xx pinout to Foxflash

Delphi DCM3.7AP MPC55xx

Solder the rainbow flat cable on the pcb:

To read and write use the following driver:

->BDM/Jtag

->BDM/Jtag Mode

->Jtag Nexus MPC/SPC

->MPC 55xx

 

I have FoxFlash tool and tested work perfectly.

Best price and quality, I am their regular customer, I bought a total of 6 sets of FoxFlash, since 2022 May. I recommend this shop.

Successfully cloned the ME9.1 MPC563/4 by foxflash.
Ext flash, Int flash and eeprom written with checksum OFF.

The car started perfectly.

---

got FoxFlash three days ago, good job. I am very satisfied.

The delivery is fast, FoxFlash is a good tool, I have bought 3 sets.

fast delivery. I got the FoxFlash tool, everything is fine, thanks.

FOXFLASH R/W FIAT IAW 10GF IN BENCH TEST SUCCESS

---

Very good price and quality, recommend it.

Foxflash Read and Write Mercedes VGS3 Coding Success

Here’s the clue. The main function of this procedure is to write the VGS data from the original faulty VGS3 to a new unit after replacement.H

This driver is dedicated exclusively to the manipulation of the ES number, SCN string and Chassis number. The driver does not clone the control unit. It can be used in case of replacement of the hydraulic unit.

This module only lets you get the coding, or write the coding. You can edit the coding directly from FoxFlash. You can edit the VIN and EHS number and write.

People always use autel im608 for that looks like foxflash is easier to do.

CONTINENTAL TEMIC VGS3 7G Tronic – Mercedes Benz Pinout to Foxflas

Mercedes VGS3 successfully read code with FoxFlash.

Worked well after getting code and also tried the SET CODING option and that allows to edit the VIN, EHS Number and SCN string.

So no need to unlock vgs with foxflash. You can also have Autel Ultra (or other Autel MaxiSys tablets) and Godiag gt100 breakout box to virginize the VGS3 on the bench and you can still program it that way OR use FoxFlash to read the donor VGS3 and transfer the data to the virginized one.



 

---

Successfully cloned the Audi ME9.1 ECU with foxflash programmer on bench.

Read ext flash, int flash and eeprom and write all three.

Don’t wite all in one or better to do it separately.

 

Pinout BOSCH MED9.1 [ MPC561/2 ] – Audi, Vw, Seat, Skoda [Gasoline]

To read and write use the following driver:
→ BENCH MODE
→ [brand]
→ MPC561/2 – Vag
→ MED9.1

Pinout BOSCH MED9.1.x [ MPC563/4 ] – Audi, VW, Seat, Skoda, Porsche [Gasoline]

To read and write use the following driver:
→ BENCH MODE
→ [brand]
→ MPC563/4 – [brand]
→ MED9.1.x

FoxFlash , I recommend 100% quality products, good seller!

FoxFlash is great product, great quality, great price, great service, everything is great！