Foxflash Read Opel ACDELCO E87 by Bench

Bench Mode: OK
Opel full system delco e87
Read/write ok
Checksum by foxflash ok, voltage 13.5v
car starts.
If have a problem with full backup, error wrong file size, individually upload without a problem and do a reset, it will work.

fox flash delco e87 bench pinout

---

Honestly this FoxFlash is pretty nice it does a lot for the price. I haven’t had to use it for much yet but I’m definitly excited for when I do have to

Read and write VAG VW Audi Skoda Seat Bosch MED17.1.1 TC1796/TC1797 on bench and boot mode using KT200/Foxflash ecu programmers success

---

I  have unlocked a VAG Simos PCR2.1  ECU using Foxflash ecu tool by OBD. The function requires network connection.
Get Identify, and get an Ori, modify Ori and during write tool applies Patch.
First, read by obd using unlock obd protocol. Fox flash will give you a VR FILE.
Second, write file selecting complete. it will stop at 6%, reboot the writing and then, at 6% again, it asks you to remove the key 120s, then unplug the battery 60s, then plug it 60s and then press ok before turning on ignition.
Fox flash will resume and will take about 20 min. You can now write selecting tables and takes about 3-5 min. Everything is explained in the manual, so it’s easy. 
Bench mode is easier.

 

---

Foxflash ecu master tool read and write Jeep Cherokee TCU ZF 9HP transmission gearbox TCU successfully.

ZF 9HP – FCA-FIAT/JEEP/CHRYSLER Pinout to Foxflash
Set up 9HP gearbox with fox flash in BDM
Select driver Jeep Gear->Cherokee->ZF 9HP48 TC1782 Boot Tricore
Read all (full flash and eeprom) in boot.
 

---

Foxflash read, write Mercedes Benz gearbox VGS2-NAG2 without problem.

CONTINENTAL TEMIC VGS2 – Mercedes Benz

To connect to the control unit use:
– Multifunction cable
– Round Pin connectors

THIS DRIVER IS DEDICATED EXCLUSIVELY TO THE MANIPULATION OF THE EHS NUMBER, SCN STRING AND CHASSIS NUMBER. THE DRIVER DOES NOT CLONE THE CONTROL UNIT.
IT CAN BE USED IN CASE OF REPLACEMENT OF THE HYDRAULIC UNIT.

Read – OK (no problem)

Select driver in foxflash software: CAR > Mercedes Gear > Model >Temic Continental 7G-Tronic VGS3 Coding *CAN

Write – OK (no problem)

Foxflash is a very good tool.

Both read MED17.1 easy on bench

To read and write use the following driver:
→ BENCH TRICORE
→ VW / AUDI / SEAT / SKODA
→ TC1796 – VAG
→ MED17.1

 

---

BMW ZF 8 HP gearbox reading test by obd with Foxflash, Stage 2 nbt id4 carplay bonus and sports display modification. It works!




Select driver

TCU Gear->BMW Gear->4 Series F32/F33/F35-> ZF 8HP *CAN



Read ID



Read data

This FoxFlash has surpassed my expectations. Feature packed at a great price. Comes in a rugged and heavy duty case with lots of storage room for the cables and other peripherals

FoxFlash ECU Tool Read VW MED17.5 on Bench 

First Connect the FoxFlash bench box, Foxflash ECU Chip Tuning Tool, BMW ECU and computer correctly.

The wiring diagram which can be found under C disk/Program files (x86)/FoxFlash Manager/foxflash/DFB Technology/DOCUMENTS directory

Make sure to connect internet as well

Select driver, car maker, vehicle model to enter the main operation page

First connect and then read all

OK, read out the ECU is EDC16U34.

FORD TRANSIT SID211 OBD
Audi MD1CS004 read + write OK
Opel zafira B 1.9cdti 150cv Edc16c39 can Read and write ok with obd
Write marelli 5af.n8 and marelli 8f2 and everything ok written and chk ok

Foxflash Read and Write Mercedes CRD3.0 on Bench
RED: + 12V 5, 15
BLACK: GROUND 2
BLUE: CAN-H 41
ORANGE: CAN-L 54

To read and write use the following driver:
→ BENCH MODE
→ MERCEDES BENZ
→ TC1797 – MERCEDES
and choose:
→ CRD3.1x

---

BMW F10 3.0d Edc17cp45 possible read and write with Foxflash/KT200 via Bench Success. 
Here’s the user test report. Hope it helps.

OBD mode: 
Read backup bench mode, for testing via OBD
VR file not download
File NOT FOUND IN DATABASE
Mode file to not write with obd
Error
PATCH NOT APPLICABLE
FILE ALREADY MODIFIED
FILE CS OK


OBD Read/Write don’t work.  Not possible write mod file, checksum ok.
Because VR patch for obd write not available, so if read bench must write bench.
If you obtain ori file, send it to info@dfb-technology.com along with the ecu details, Foxflash team will add it to the database.

Bench mode:
Bench Read/Write work.
exactly make full backup on bench and if something goes wrong you have backup to restore.

Also mod over obd takes long time, there is a risk that battery voltage drop down and kill ecu while writing. Personally I don’t see any props about writing obd. Always bench! Quick and safe!

BMW EDC17C41_TC1797_ Bench bed written ok.
Benz Vito EDC17C66 ALL OK, checksum with WinOLS.
Clone edc15c13 renault BENCH Flash&eeprom Start.
Audi A4 B6 1.9TDI (My own car) EDC15P+ OBD R/W - OK.
Peugeot 508 DCM 6.2A R&W OK.

EDC17C64 - Bench - R/W - OK
Delco 1.7DTI - OBD - R/W - OK
Vw golf 1.6benzin Magneti marelli R/W obd Ok

Very powerful and useful product. Had some questions about a function of FoxFlash and contacted tech support. They were very helpful and patient with my barrage of questions. Buy this device, it’ll pay for itself in a matter of minutes.

Seller communicates well, FoxFlash is a great tool to have.

This will be my second think  ECU programming tool, nothing but great with this it's super easy to use and does every ECU you could think. 
I'm already done with the first tests in bench mode.
EDC17C64 R/W OK
MED9.1 R/W OK
EDC16C9 R/W OK
EDC17C11 R/W OK
In each case, the numerical check with FoxFlash and surprisingly, it worked smoothly every time.

I received my packet Thank you! Best regards!
PSA EDC16C34 R/W OK Hardcut added & Car started perfect
BMW MED17.2.5 R/W Ok Seam's like a stable & Reliable tool, very Internet dependant.
 

Can’t beat it for the price. Does a lot of stuff some of these expensive ECU programming tools can’t even do.
It just arrived and installed on w11 pc. I read edc16cp34 VW with success and zf8hp BMW gearbox by obd